I was wondering about the top speed when i watched that original vid. Tbh i thought it would be a bit faster, i was able to get to 41mph on my own jet kart with a smaller engine and it was still accelerating, but i got sketched out.
Yeah I think I remember that, I also thought it would have been much faster like over 80 mph. But it was definitely on the balance point and the wind resistance was definitely doing its thing. I think with some more aerodynamics it would have probably done 70 or 75, but honestly if I want to go faster I'll just put more engines hahaha.
I saw a guy who was trying to break the world speed record with a RC car having to do a bunch of things similar to what would hold back the speed from air drag That dudes problem was tires, it’s prob a combination of road type and tires 40 mph with a jet engine is pretty sketchy, idk how the dude did 60 mph in one, I bet a pothole or bump is a nightmare
Many people cannot appreciate what this man builds in his garage. Amazing stuff as always WP! And 50 plus mph is a cart is far faster than most can conceive. That’s smoking.
Thanks! You know what's up. Tbh the disease is very painful at times, making things work well is hard, making things work great is very difficult most times.
Yeah 100%, the amount detail in every little thing he does is crazy. So many other build channels are sketchy as hell and just try to hide it with editing
@@WarpedYT here’s another one for the backlog, completely unrelated to this. I haven’t found a single video on the Internet that shows the output side of a turbo when it’s being run by exhaust of an engine. Like how much air is coming out, and what happens when you start to constrain it with a nozzle? is it a leaf blower? Is it an air compressor, what’s going on there?
@@jcimsThere is a video called "Actual working model of turbo charger" I think it's similar to what your looking for, not exactly but pretty close :)
this man put passion into it without knowing it. add finishing to the chair, wheel balancing and paint the chassis. this is quality workmanship just for a project that he do for youtube
@WarpedPerception damn bro glad you're doing better, I know it's none of my business, but you know what they say curiosity killed the cat, do you mind elaborating a bit on why your injury happend? Did you fall and hit your head or crash or something like that? I really like your channel and can't wait to see future uploads :)
- improve the aerodynamics with some covers over the frame and the bottom - side skirts for groundeffect - add 2 vertical parallel fins behind (each) jet engine that are controlled via cables and the steering for giving you vector-thrust in tighter turns; if you have oversteer and you need to counter-steer the vector-thrust can help you to get the rear of the go-cart back on track 😉 *Nice project!!!* 😃👍
First Time Caller 😂 But just looking at the pictures. Extending the frame just a tad. And putting the outside engines, just so they warm the tires. Yeah, make them individually throttlable. You might get a cart that has an All Weather Capability 😂 ... and Sticky in the Corners 😏 From an old school aerospace guy. That actually worked with that Science Guy. I think his name was Speed Walker 😂 ... memories 👍
That drag behind the go-cart is also robbing the engine of ram recovery pressure. You need ducts that take the free stream air and direct it to the intake.
i thought it would be sick if adds body panel that shape like a jet with the intake of F35 up infront to channel it to the jet engine. i wonder if it faster like that
That was crazy cool !! If you added aerodynamics of any sort, I'm sure you could increase the top end, but not by much. Not sure I would want to go much faster, without some crash protection, pads, etc., as any failure at these speeds would probably equal a hospital trip. Just a very cool project, all in all, and well done !!
Felt like i have been waiting for this video for years now. Lol went to sleep a few time wondering what the top speed was going to be. I fully appreciate thr work you put into this and all you videos.
I know, I'm always super late because I got a million things going on, but recently I sort of become more focused so hopefully I can keep some momentum on some videos here. Thanks!!
I know it's been tough, I was pretty much on schedule last year around this time but then I did a few projects with Mr Beast, I just finished those up in June, then I had to set up all my machines for all of the videos moving forward, then I had a brain injury a few weeks ago. But I'm recovering and back to making videos now. All I really want is a consistent upload schedule but these projects are extremely difficult and my life is insane.
Thanks I'm trying, it's been so tough, between doing and Mr Beast projects for months on end, and trying to get my stuff together, and then recently getting injured... Always something but I'm definitely going to try to keep momentum here, I love making videos.
@@WarpedYT I'm sure that Mr. Beast project was much more involved than it appears from how we see it through a screen. We know you love making videos! You've got this.
Thanks Man! To be honest I really didn't want to do this video, I wanted to go way more extreme, but I had to do it because I was curious and so was everyone else I guess. But the next couple GoKart videos are insane lol. I just don't think I'm going to be able to ride them because I recently had a brain injury.
@@WarpedYTyour fans appreciate having this for comparison before the next generation. Great video… Sorry to hear about the injury… I pray that it’s fully recoverable.
@@WarpedYTwasn't courtesy of one of your projects, was it? You do some outstanding things on this channel. 🤘best wishes on a speedy recovery. Peace, John
I recently had a brain injury, it's been an extremely insanely painful last couple of weeks... When I was in the ER I had a full dose of fentanyl and the pain was still there, But I'm currently recovering and I'm doing pretty good.
That was awesome!! I would love to see you add some aerodynamic additions/changes to see how much faster you can get it to go. I'm guessing if you can get the seat to lay back some, that alone could easily get it over 70. Great job and keep up the great work!!
The little kids are always pretty cool, it's the adults I have issues with, I have people that are so mad at me for no reason at all that they don't even talk to me.. dead serious..
That was very impressive ! I was not expecting that level of speed and performance from only one of those engines. That jet engine packs a punch with out a doubt ! At those speeds with that amount of fuel sloshing around not to mention a smoking hot jet engine, you might want to get a nomex suit or the likes. Just my 2 cents.
Wow! I think a duct into the jets intake to take advantage of ram air at higher speeds would really help the peak thrust and top speed. Right now the jets intake is in a vaccum region which is fighting performance
That's what u would think but these are turbo jets, They don't pull in as much air as you would expect, most of the power from these engines comes from the fuel, If they don't get enough air they stall, that's pretty much it. I do however wonder if an air intake would increase the efficiency. See because no matter what these engines are RPM based, they're going to dump fuel until they reach the target RPM or stall in the case of not getting enough air. I'm definitely going to experiment with that
I just got back to it after almost a year of back to back Mr beast videos and then I had a head injury a couple weeks ago I'm now recovering from ☹️. I literally have like the worst luck
These are great, I think you could get more content out of a lot of these builds if you did build videos. I know they take time, but there is so much involved in these and I'm sure we all want to see more!
Better aero and an ram air duct for the jet as it gets very little air from being right behind you in the vacuum drag instead of getting some air pressure
Thanks, I've been really tied up for the last year working on Mr Beast project, but as of July I'm back on my stuff, A few weeks ago I got sidetracked with an injury but I'm recovering now...it was insanely painful.
If i ever did a channel, it would like this one! This dude is low-key, very intelligent, and down to earth at the same time. I my idea for a channel is turbo everything or muti engine everything. Junk cars, rc cars, go carts, lawn mowers, tunners, muscle..etc then compare them to a modern fast or super cars..
Thank you! I had no friends growing up so it's bitter sweet. I love multi engine setups, I saw a dual engine Hyundai one time, can't remember what model but it even had two transmissions and the guy would put one in drive and one in reverse and do four-wheel donuts.
It's guys like him that makes me want a Go-Kart myself, just to have a little something to get around on in my town and to get out and get some air every now and then.
I'd love to see if the single jet makes much more top speed with some ducts feeding it air. It seems like as the speed increases, inlet pressure would be dropping. It's possible the added drag ends up equaling the improved thrust, but it'd be interesting to see especially because it looks like when you have 3 jets there will be 2 operating in clean air
Well these are turbo jets, they don't really benefit from ram Air too much. With turbo jets if there's not enough air flow or the air pressure in front of the intake is too low then the engine will stall. The speed here is too low I would think maybe over 150 or 200 mph there might be enough of a low pressure zone behind the seat to reduce the amount of air to a point where it could cause problems, these engines get most of their thrust from burning fuel And they are RPM based, So the computer will inject fuel to get to the Target RPM. As for the 3 jets I am building a completely different setup for that.
Man, you do great work. A lot of very different skills. I was impressed just by the wrapping of the steering wheel lol. Some would make a video just of that, for you, its just a 5 second time lapse shot (which is cool too). I can appreciate the time it takes to make custom stuff like that. Let alone the one off cnc parts, anodizing, building/programming electronics, etc.. Happy i found this channel. You could probably make a separate channel just for 'behind the scenes' from leftover footage that gets cut/glossed over during a project like this.
Thanks, it was insanely painful for almost 2 weeks straight, I can't explain how intense and unbearable the pain was non-stop continuous. But I actually made it and I'm currently recovering, all I can tell you is a brain injury is no joke, it's really hard for me to explain how you pretty much have no control over what your brain is doing.
@@WarpedYT I'm really sad to hear you had to deal with that and it's effecting you so heavily. If you can find the will to turn it into a positive experience and grow from it, I'm rooting for that. Hang in there brother.
Growing up next to an 8 mile long dry lake bed. trying to find places to go fast was never a thing I worried about. although I never had a jet powered go cart😂 but I did do some land yachting which you need good flat open areas to get some good speed
Thanks, A lot of people ask me in the comments, and I was personally curious so it had to be done, I was supposed to have the next video out already but I had a brain injury a few weeks ago, it was hell no joke I can't even explain how intense the pain was for a week and a half straight non-stop no break, it was insane, but I'm back at it now
I definitely feels like it was 86 years ago, unfortunately I had an brain injury which was no fun but I'm recovering and I'm back making videos thank God..
Pretty crazy setup specially with all that fuel and stuff in front of you. Just glad you didn't hurt yourself doing this. The sort of thing you should be doing at a racetrack with flame proof suits not on a back street somewhere. Anyway, good to see you survived it OK.
Alright, so more ideas getting explored here: Arguably the largest wond resistance is always going to be the person in the seat, maybe create a clear hood structure of some kind to reduce the drag? Or for shear numbers game create an entirely remote version with cameras installed in case you lose line of sight somehow.
Maybe with a better air intake of the jet engine you could get more thrust at higher speed, because with the current setup the seat is masking the intake of jet engine
Cool video, I enjoyed that. I've always wanted to explore the possibilities of those small jet engines, and what better way to do it than with a go cart.
You should build some forced air ram ducts around the seat so that you get optimum air velocity rather than the turbulent air behind the seat. Not only will it perform better at mid-to-top speed it will also look cool. You would just need some ducts that wrap around the seat with a wide mouth opening tapering to the size of the jet intake. They do the same with mid-engine mounted jet planes. You're a master craftsman it would be a walk in the park for you.
I was wondering about the top speed when i watched that original vid. Tbh i thought it would be a bit faster, i was able to get to 41mph on my own jet kart with a smaller engine and it was still accelerating, but i got sketched out.
Yeah I think I remember that, I also thought it would have been much faster like over 80 mph. But it was definitely on the balance point and the wind resistance was definitely doing its thing. I think with some more aerodynamics it would have probably done 70 or 75, but honestly if I want to go faster I'll just put more engines hahaha.
I saw a guy who was trying to break the world speed record with a RC car having to do a bunch of things similar to what would hold back the speed from air drag
That dudes problem was tires, it’s prob a combination of road type and tires
40 mph with a jet engine is pretty sketchy, idk how the dude did 60 mph in one, I bet a pothole or bump is a nightmare
@@WarpedYT Please tell us the name of the awesome song playing at @1:00 !!!!!!!!!!!!
@@WarpedYT Aerodynamics are for people who can't build engines.
@@matejzahajsky lol... There u go! Although at some point I would think if you go fast enough the wind will rip your face off haha
This man is the definition of; If it drives, put a jet engine on it.
Rad.
Colin Furze mate!
Many people cannot appreciate what this man builds in his garage. Amazing stuff as always WP! And 50 plus mph is a cart is far faster than most can conceive. That’s smoking.
Thanks, personally I thought it was going to go faster I thought I was going to get to at least 80. But that wind force is killer!
Thanks! You know what's up. Tbh the disease is very painful at times, making things work well is hard, making things work great is very difficult most times.
@@WarpedYTwhat if you try adding some aerodynamics body to it
We run over 50mph with predator engines on small dirt tracks. Clones are 60+
U should make me one
this channel always amazes me at the effort this dude puts into his projects... always 10/10
@DontReadMyProfilePicture.57 is this some kind of Russian nesting doll thing?
Yeah 100%, the amount detail in every little thing he does is crazy.
So many other build channels are sketchy as hell and just try to hide it with editing
Thanks! I appreciate that, been building up my capabilities by took longer than I thought ( as most things do)
3 engines will be insanity
I know you do stuff differently but I gladly would have watched 5 individual 25 minute long episodes of you building this thing.
Thank you, I think about that every so often, but to be realistic I have a lot of videos to make, I'm so backlogged. I'm just trying to get on it now.
Sick Matt..
I just showed my son your channel. It's probably the best channel he's ever seen. 😊
@@WarpedYT here’s another one for the backlog, completely unrelated to this. I haven’t found a single video on the Internet that shows the output side of a turbo when it’s being run by exhaust of an engine. Like how much air is coming out, and what happens when you start to constrain it with a nozzle? is it a leaf blower? Is it an air compressor, what’s going on there?
@@jcimsThere is a video called "Actual working model of turbo charger" I think it's similar to what your looking for, not exactly but pretty close :)
I have something to build and wonder if that engine and electrics are for sale somewhere that you could share the link?
As always, above and beyond what we deserve in a vid.
Thanks man
😊
this man put passion into it without knowing it. add finishing to the chair, wheel balancing and paint the chassis. this is quality workmanship just for a project that he do for youtube
How much does a jet engines cost?
HEY,.. HE DIDN'T SIGNAL HIS TURNS ! ! !
... shots fired, shots fired 😳
Praying for your recovery…. Glad your staying engaged with you passions. Take care
Thanks.... I'm just glad I'm here and I'm still functional, brain injuries are no joke, like nothing I've ever experienced before super bizarre.
@WarpedPerception damn bro glad you're doing better, I know it's none of my business, but you know what they say curiosity killed the cat, do you mind elaborating a bit on why your injury happend? Did you fall and hit your head or crash or something like that? I really like your channel and can't wait to see future uploads :)
It's interesting how you layed out the dawg as a blast shield !!!🐕
- improve the aerodynamics with some covers over the frame and the bottom
- side skirts for groundeffect
- add 2 vertical parallel fins behind (each) jet engine that are controlled via cables and the steering for giving you vector-thrust in tighter turns; if you have oversteer and you need to counter-steer the vector-thrust can help you to get the rear of the go-cart back on track
😉
*Nice project!!!* 😃👍
First Time Caller 😂
But just looking at the pictures.
Extending the frame just a tad. And putting the outside engines, just so they warm the tires.
Yeah, make them individually throttlable.
You might get a cart that has an All Weather Capability 😂
... and Sticky in the Corners 😏
From an old school aerospace guy.
That actually worked with that Science Guy.
I think his name was Speed Walker 😂
... memories 👍
That drag behind the go-cart is also robbing the engine of ram recovery pressure. You need ducts that take the free stream air and direct it to the intake.
Well these engines don't benefit from RAM recovery at all, if they don't get enough air, they stall
@@WarpedYT Now water injection? That may help! Might not be enough compression for that though
i thought it would be sick if adds body panel that shape like a jet with the intake of F35 up infront to channel it to the jet engine. i wonder if it faster like that
@@BlueRice that's exactly what I was thinking for the next build. I don't know how much it would help performance but it would look cool for sure.
I was like wtf with the intake behind the seat..
That was crazy cool !! If you added aerodynamics of any sort, I'm sure you could increase the top end, but not by much. Not sure I would want to go much faster, without some crash protection, pads, etc., as any failure at these speeds would probably equal a hospital trip. Just a very cool project, all in all, and well done !!
Yeah exactly, I completely agree.
If he added some aero it could be a fighter jet.
Now he's at 50mph the jet behind the seat will start to suffer reduced intake due to a low pressure region forming.
To be fair, I think there could've been a noticeable difference even if he had just tucked down.
@@yuvix I agree, but My solution would just be add more engines lol
Nice build! Absolutely nice seeing you build the right stuff the right way! Thanks bro!
Thank you... You know the details are tough!
Felt like i have been waiting for this video for years now. Lol went to sleep a few time wondering what the top speed was going to be. I fully appreciate thr work you put into this and all you videos.
I know, I'm always super late because I got a million things going on, but recently I sort of become more focused so hopefully I can keep some momentum on some videos here. Thanks!!
Cop casually drives by like a jet engine go cart is the least of his worries that day. Creative content is greatest!
Good to see you back
thats crazy that vid of the dude on the kawasaki is in my hometown🤣 never realized that till now
It sounds like a jet plane. It's actually a freaking jet! Fascinating
Bro casually came out of nowhere after 2 months as usual
I know it's been tough, I was pretty much on schedule last year around this time but then I did a few projects with Mr Beast, I just finished those up in June, then I had to set up all my machines for all of the videos moving forward, then I had a brain injury a few weeks ago. But I'm recovering and back to making videos now. All I really want is a consistent upload schedule but these projects are extremely difficult and my life is insane.
Notification SQUAD!!! Have a nice weekend!🔥🔥🔥
Yes! Finally. So glad to see you back in the swing of content, keep this momentum please!
Thanks I'm trying, it's been so tough, between doing and Mr Beast projects for months on end, and trying to get my stuff together, and then recently getting injured... Always something but I'm definitely going to try to keep momentum here, I love making videos.
@@WarpedYT I'm sure that Mr. Beast project was much more involved than it appears from how we see it through a screen. We know you love making videos! You've got this.
@@travis.napier well I worked on at least 5 Mr Beast projects so yeah That's what it took so long. Not sure which one you saw.
@@WarpedYT Oh man, I'll have to look more then. I only saw the one jumping the school buses.
What a great build! That seems like alot of fun to drive, nice engineering =)
Thanks Man! To be honest I really didn't want to do this video, I wanted to go way more extreme, but I had to do it because I was curious and so was everyone else I guess. But the next couple GoKart videos are insane lol. I just don't think I'm going to be able to ride them because I recently had a brain injury.
@@WarpedYTyour fans appreciate having this for comparison before the next generation. Great video…
Sorry to hear about the injury… I pray that it’s fully recoverable.
So sorry to hear about your brain injury, hope you recover quickly! Can't wait to see what is next in store mate!@@WarpedYT
@@WarpedYTwasn't courtesy of one of your projects, was it? You do some outstanding things on this channel. 🤘best wishes on a speedy recovery. Peace, John
This man brings anything he thinks of to life
Hope your injury isn't life changing. Keep up the good work.
What happens did I miss something 🤔
@@alraybaca6235 read the notes/description
How did you know about my injury?
I recently had a brain injury, it's been an extremely insanely painful last couple of weeks... When I was in the ER I had a full dose of fentanyl and the pain was still there, But I'm currently recovering and I'm doing pretty good.
@@WarpedYT you put in in the description
That's cool. Missing the "professional driver on a closed road" disclaimer:Q
This is awesome! Next level content for sure.
Thank you
That anodizing looks SICK bro!!
It works so well And you can do pretty much any color you want if you do it yourself.
@@WarpedYT You're a wizard, Matt! I love it!
You are a scientist, top mechanic, driver, inventor...you rock 💪😎
That was awesome!!
I would love to see you add some aerodynamic additions/changes to see how much faster you can get it to go. I'm guessing if you can get the seat to lay back some, that alone could easily get it over 70.
Great job and keep up the great work!!
Did you work as an engineer before you started youtube? Great video as always!
Yes I still do.. 🙂
Love your projects! Very underrated, been following you for years. Greetings from far away Finland in Europe, keep it up! 💪😎👌
hello its been 12 min and wow that go kart look so goood and the next time strap three jet engines to the go kart
Everything you build is top notch Matt. Your kids friends must be envious!
The little kids are always pretty cool, it's the adults I have issues with, I have people that are so mad at me for no reason at all that they don't even talk to me.. dead serious..
@@WarpedYT That is sad my friend. But I guess that's just how some people are nowadays. 🤷♀ And yeah, kids are amazing.
I love this channel!!! Wish you much success bro!!! 🔥💯🔥
Thanks!! It's been really rough
That was very impressive ! I was not expecting that level of speed and performance from only one of those engines. That jet engine packs a punch with out a doubt ! At those speeds with that amount of fuel sloshing around not to mention a smoking hot jet engine, you might want to get a nomex suit or the likes. Just my 2 cents.
Wow! I think a duct into the jets intake to take advantage of ram air at higher speeds would really help the peak thrust and top speed. Right now the jets intake is in a vaccum region which is fighting performance
That's what u would think but these are turbo jets, They don't pull in as much air as you would expect, most of the power from these engines comes from the fuel, If they don't get enough air they stall, that's pretty much it. I do however wonder if an air intake would increase the efficiency. See because no matter what these engines are RPM based, they're going to dump fuel until they reach the target RPM or stall in the case of not getting enough air. I'm definitely going to experiment with that
I love how my man put a volume warning at 2:58, reminded me to turn my volume *up* lol
That looks like a blast
Absolutely amazing! The fabrication, the upholstery, everything diy. I want to be like you when I grow up lol.
Man this is such a nice video! So much progress and perfectly created with no drag or delay to make the video longer! PERFECT!
Thanks I appreciate that, sometimes I wonder whether I should make the videos longer and more dragged out .
I'm just glad that you're back, bro. Awesome content as usual, keep it up! Get well soon.
Thanks, I'm getting a little better everyday, my vision and brain function were the biggest hurdles
Mould release from the manufacturing process may explain the slippery tires.
Ah that's a good point
I randomly searched your channel yesterday for jet engine content as a reminiscer and suddenly this has appeared. Awesome!
I just got back to it after almost a year of back to back Mr beast videos and then I had a head injury a couple weeks ago I'm now recovering from ☹️. I literally have like the worst luck
@@WarpedYT get better soon. I'll be ready and waiting for the next jet madness!
@@RobOnMotors thanks.... I'm on it.
nice video i love you i have watched you since i had 8 years
Thx, So that makes u 14 now ?
No im 11, i have been watching you for 3 years and the most nostalgic thing is that mercedes that you have!!@@WarpedYT
That thing as a Hybrid would be even more awesome.. Amazing work.
Chinese cheap tyres will be a completely different compound of rubber. Harder. Longer to heat up. More difficult to keep the heat etc
I found that out the Hard way lbvs lol.
@@WarpedYT me too except I was in my 1985 mini in the rain 😂😂😂😂 I always buy a certain hankook tyre nowadays because of it 😅😅
Love the science and engineering!
Thank you
These are great, I think you could get more content out of a lot of these builds if you did build videos. I know they take time, but there is so much involved in these and I'm sure we all want to see more!
Can’t wait for 3 jets!
Nice work!
Better aero and an ram air duct for the jet as it gets very little air from being right behind you in the vacuum drag instead of getting some air pressure
Craziest but amazing to see. Great work dude.
Bro killed the video again 🎉
Been missing your content, Matt. ALWAYS good shit. Keep em coming. Please.
Thanks, I've been really tied up for the last year working on Mr Beast project, but as of July I'm back on my stuff, A few weeks ago I got sidetracked with an injury but I'm recovering now...it was insanely painful.
Dude you are seriously talented and skilled. Blows my mind how much you know how to do
Need to do a twin jet setup next! Can’t wait to see the top speed on that!
If i ever did a channel, it would like this one! This dude is low-key, very intelligent, and down to earth at the same time.
I my idea for a channel is turbo everything or muti engine everything. Junk cars, rc cars, go carts, lawn mowers, tunners, muscle..etc then compare them to a modern fast or super cars..
Thank you! I had no friends growing up so it's bitter sweet. I love multi engine setups, I saw a dual engine Hyundai one time, can't remember what model but it even had two transmissions and the guy would put one in drive and one in reverse and do four-wheel donuts.
You're ready for 5 jet engines.
Hahah.... I am
Awesome
Nobody does it quite like you. Well done.
It's guys like him that makes me want a Go-Kart myself, just to have a little something to get around on in my town and to get out and get some air every now and then.
Amazing and really cool kart! I can't wait to see whats next .Thanks for posting this .
A great Go Kart BUILD with a Jet engine
Needs 2 or 3 jet engines for better acceleration and top speed lol
Absolutely agree
I'd love to see if the single jet makes much more top speed with some ducts feeding it air. It seems like as the speed increases, inlet pressure would be dropping. It's possible the added drag ends up equaling the improved thrust, but it'd be interesting to see especially because it looks like when you have 3 jets there will be 2 operating in clean air
Well these are turbo jets, they don't really benefit from ram Air too much. With turbo jets if there's not enough air flow or the air pressure in front of the intake is too low then the engine will stall. The speed here is too low I would think maybe over 150 or 200 mph there might be enough of a low pressure zone behind the seat to reduce the amount of air to a point where it could cause problems, these engines get most of their thrust from burning fuel And they are RPM based, So the computer will inject fuel to get to the Target RPM. As for the 3 jets I am building a completely different setup for that.
Ohh man, yes!, your stuff is allways top notch!
Insanely well done project. How the heck is he funding all this? 😂 I can't imagine UA-cam revenues are enough for this level of work.
🙂
Man, you do great work. A lot of very different skills. I was impressed just by the wrapping of the steering wheel lol. Some would make a video just of that, for you, its just a 5 second time lapse shot (which is cool too). I can appreciate the time it takes to make custom stuff like that. Let alone the one off cnc parts, anodizing, building/programming electronics, etc..
Happy i found this channel. You could probably make a separate channel just for 'behind the scenes' from leftover footage that gets cut/glossed over during a project like this.
Hella dope af, but U gotta get more jets on that thing bro. My modified 212cc predator engine from harbor freight makes my go kart go faster than that
Yeah with three it's going to be insane no doubt.
Brilliant ,and the bonus you even explain the thrust drag stuff so simply Great video . Vetri South Africa 🙏🇿🇦🙏
Wow reading about your injury is a big deal, wishing you and your family a healthy and positive recovery.
Thanks, it was insanely painful for almost 2 weeks straight, I can't explain how intense and unbearable the pain was non-stop continuous. But I actually made it and I'm currently recovering, all I can tell you is a brain injury is no joke, it's really hard for me to explain how you pretty much have no control over what your brain is doing.
@@WarpedYT I'm really sad to hear you had to deal with that and it's effecting you so heavily. If you can find the will to turn it into a positive experience and grow from it, I'm rooting for that. Hang in there brother.
Growing up next to an 8 mile long dry lake bed. trying to find places to go fast was never a thing I worried about. although
I never had a jet powered go cart😂 but I did do some land yachting which you need good flat open areas to get some good speed
That sounds pretty amazing
am glad for being one of the few first subscribers of this chanel 👅
You know whats better. Go kart with 2 jet engines.
Yes I built that one, but it's going to another UA-camr. Next one I'm going to show is a triple jet.
Those mini turbojets are so cool
Awesome man, you went over the top with the finishing touches, was that seat alcantara?
Thanks... Yes it is !!!! Good eye.
Bro, all that awesome work and no roll cage? Come on man. Still really cool, super talented.
Can't wait to see more jets added to this unit
That was baddass👍made me nervous watching!
It needs an air duct for high speed, they really need a lot of fresh air at high rpm and its probably not getting enough that close to the seat.
It's ok, these are turbo jets, if it's not getting enough air it will just stall, doesn't affect the power any.
Awesome so glad you did a top speed because I was wondering what its top speed was, thanks for doing the top speed!!!
Thanks, A lot of people ask me in the comments, and I was personally curious so it had to be done, I was supposed to have the next video out already but I had a brain injury a few weeks ago, it was hell no joke I can't even explain how intense the pain was for a week and a half straight non-stop no break, it was insane, but I'm back at it now
This plus 3 more jet engines. Let’s do it.
Great, as always, I really appreciate your detailed works!
Truly spectacular!!!
My guy took a gokart to highway speeds with a relatively small jet engine. Insane
it's been a long time I was waiting for this new video, it looks the last one was 86 years ago
I definitely feels like it was 86 years ago, unfortunately I had an brain injury which was no fun but I'm recovering and I'm back making videos thank God..
I see Keeps really does wonders, look at that lush, even the cap is struggling to hide it.
Lol... I was thinking the same thing when I was filming the video, that would have been a really funny Brand integration.
Pretty crazy setup specially with all that fuel and stuff in front of you.
Just glad you didn't hurt yourself doing this. The sort of thing you should be doing at a racetrack with flame proof suits not on a back street somewhere.
Anyway, good to see you survived it OK.
Talk about a jack of all trades
Wraped perfection 🎉
Lol... Yeah unfortunately it's a disease I can't shake most of the time
@@WarpedYT you killing the game my friend 🤘
Alright, so more ideas getting explored here: Arguably the largest wond resistance is always going to be the person in the seat, maybe create a clear hood structure of some kind to reduce the drag? Or for shear numbers game create an entirely remote version with cameras installed in case you lose line of sight somehow.
Maybe with a better air intake of the jet engine you could get more thrust at higher speed, because with the current setup the seat is masking the intake of jet engine
That's gotta feel insane, going that fast just inches off the pavement.
Cool video, I enjoyed that. I've always wanted to explore the possibilities of those small jet engines, and what better way to do it than with a go cart.
i think that test pilot has the right stuff!
60 isn't bad with leathers! But without it's squid time
Next time leathers for sure
I suggest to make a aero kit for it, just to educate people about the importance of wind resistant
You should build some forced air ram ducts around the seat so that you get optimum air velocity rather than the turbulent air behind the seat. Not only will it perform better at mid-to-top speed it will also look cool. You would just need some ducts that wrap around the seat with a wide mouth opening tapering to the size of the jet intake. They do the same with mid-engine mounted jet planes. You're a master craftsman it would be a walk in the park for you.