F7 Pro Full Function Flight Controller! Literally Does It All! Wifi & Bluetooth
Вставка
- Опубліковано 22 жов 2024
- Hot New Flight Controller that literally does it all! I can't wait to get this one in a quad and in the sky!
▶️Where To Get Your Very Own:
✔️www.racedayqua...
▶️Check Out The Latest T-Motor Products:
✔️store.tmotor.com/
▶️Lumenier AIO Board
✔️ • One Board Does It ALL!...
▶️How To Remap Your Motors by CLI:
✔️ • Drone Flips Out On Tak...
▶️Ceramic Tip Tweezers:
✔️usa.banggood.c...
▶️If you want to learn about LED's:
✔️ • Betaflight LED's !! Ev...
▶️Sweet Ready To Fly:
✔️www.banggood.c...
▶️Meet & Greet With The Fettec G4:
✔️ • All New Fettec G4 Flig...
▶️Blue Loctite:
✔️amzn.to/3CGSd0x
▶️MyFPV Slidez aka Slide Too Much:
✔️www.myfpvstore...
▶️Caddx Air Unit for DJI
✔️www.myfpvstore...
▶️DrainMan Motors!!!!
✔️www.myfpvstore...
▶️Unify Pro 32 HV:
✔️www.myfpvstore...
▶️Caddx Air Unit for DJI
✔️www.myfpvstore...
▶️Custom DrainMan Motors!
✔️www.myfpvstore...
▶️Smoke Stoppers:
✔️www.banggood.c...
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore...
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
/ drainmanfpv
/ drainmanfpv
▶️If you want to learn about LED's:
✔️ • Betaflight LED's !! Ev...
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
✔️www.banggood.c...
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2 Day Shipping)
✔️amzn.to/2PjqUDi
✔️www.banggood.c...
✔️www.myfpvstore...
▶️How To Taranis:
✔️ • How To Frsky Taranis
✔️www.banggood.c...
▶️My Electronic Screwdriver:
✔️ • ES121 Electric Screw D...
✔️www.banggood.c...
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
✔️www.banggood.c...
▶️My Soldering Iron Tips:
✔️amzn.to/39IT453
✔️www.banggood.c...
✔️amzn.to/2Oj7r8C
▶️Driver Set:
✔️amzn.to/3txYarX
✔️www.banggood.c...
▶️Hobbywing:
✔️www.myfpvstore...
or
✔️amzn.to/31e6jFM
▶️Loctite:
✔️amzn.to/39QY5HE
✔️www.banggood.c...
▶️Screw Pack:
✔️amzn.to/2BPzBSq
====▶️How To Set Up A Throttle Cap: (Become A Better Pilot)
✔️ • The Ultimate Throttle ...
====▶️Flight Controllers:
✔️www.myfpvstore...
✔️www.banggood.c...
====▶️ Quadcopter Frames:
✔️www.myfpvstore...
====▶️ The Goggles I use:
✔️amzn.to/3sQ5ksu (Comes w/ 2 Modules)
✔️Analog - www.myfpvstore...
====▶️My Radio:
✔️amzn.to/3sU9Fem
✔️Non-DJI: amzn.to/39dqI3c
✔️HD - amzn.to/2AVAEQo
====▶️ Video Module That I use (When Using Analog):
✔️ www.myfpvstore...
====▶️Bench Power Supply:
✔️amzn.to/3cpIOhE
✔️www.banggood.c...
====▶️Field Bag:
✔️www.myfpvstore...
or
✔️amzn.to/2TleAns
or
Ethix:✔️www.myfpvstore...
====▶️My 3D Printer:
✔️shop.prusa3d.c...
====▶️My Camera Used:
✔️amzn.to/2wX0eCg
====▶️My Cam Mic:
✔️amzn.to/3b2ZoUZ
✔️www.banggood.c...
====▶️Contact Me: @DrainManFPV on FB or DrainManFPV@gmail.com
====▶️I'Gizzle: / drainmanfpv
====▶️ / drainmanfpv
#F7 #FPV #Pro
![☀ Дальнолет, которого все ждали. Мощь, тяга, скорость. [GepRC Moz7]](http://i.ytimg.com/vi/WZIQRYbxzpQ/mqdefault.jpg)
![☀ Дальнолет, которого все ждали. Мощь, тяга, скорость. [GepRC Moz7]](/img/tr.png)
This is an awesome option! I’ve been having a rough go with the Matek flight controllers on my Cinelifter
I won't run BF4.3 on anything less than a H7 .Too much work for a F7 when you start adding stuff. Look how the CPU load goes up using 4.3 over 4.2 . Great video Drain Man.
Hi Paul are you using the tasks command with the tx on when analysing the CPU load on BF 4.2 or just looking at the CPU percentage at the bottom?
I just bought the F7 pro, love it!! Could you please share the 3d printed antenna mounts of cine lifter please?
I have a question about this flight controller. Will the current sensing work with 12S voltage? I am trying to use my ESC telemetry to get battery voltage, but the voltage drops out every now and then and reads 0V once armed.
Any help would be greatly appreciated.
The ESC's are APD 120A 12S
It looks dope t-motor does their Thang bruh... Drainman do you have a cina quad build video
Hey Drainman...thanks for this video😃👍...was looking into something to use besides my usual mamba stacks...this t-motor FC sounds awesome...for dji too😎👊
heeyyyyy pilots! your videos are the highlight of my week brutha thanks DM
Great vid, love the scope view. Do you know if the VTX switch turns off the 10v on the dji air unit plug as well?
thanks brother love ya and keep being amazing
Love your videos Drainman, your a cool dude, no doubt!
wifi fine. do i still have to use the app? i dont knwo how i can setup betaflight configurator to use wifi as a port.
I did the F7 pro FF with the F55 Pro III ESC. 230 dollar flight stack all said and done. I feel.... OK about it... kinda.
Interesting content. Grating presentation.
This is the only fc i use :)
Hey Drainman what frame was that X8 you showed in the video?
Does it roll?))
Do you have a recommend ESC to pair this with for 5in, 6s build? Thanks. 4 motors.
Tmotor makes great ESC's too. I'd start with them as you probably won't have to reorder the plug from esc to fc. Pretty much any 4 n 1 esc will work, they just may require work to reorder the wires.
could someone please help me? I got the HD version but I do not have any HD stuff. Can I still use an analog VTX on it? or Do I need to but this one? Crap! - thank you for your help
Hey Drainman, how to install 5 volt rgb led in drone made with pixhawk flight controller , with many pattern of led which can be control by one knob of the remote. Please make a video sir. Love from Assam, lndia🇮🇳🇮🇳🇮🇳 sorry because I am don't know English properly
hey man......before one month i had ordered all the best of t motor...4x motors f60pro vi + f55A pro ESC + this FC F7 pro (with wifi + 8 motors etc)......i builded it carefully and i tested it flying first without i add the dji air unit cause the frame is racing and goes upside the stack and its too tight..anyway it flew perfectly nice....then i go add with the ready plug cable as the diagram shows and boom smoke coming out of the bottom...i immediately pulled the battery ....anyway i was waiting so long to fly again after losing my previoys drone that i paid almost double price to buy new same ESC from local store....and what happens? the drone power up the crossfire reciever and flys BUT the plug which i removed the 2 extra wires it had for if you fly using the dji remote controller and neither powers up the unit from the front pads with the 10V .....so the half pads working and the pads and plug for air unit are dead.....sure some regulator is dead but what am i supposed to do now? i already paid 2 times the same expensive ESC and now i have this half working f7 pro flight controller....also i have another 5-6 t-motors fc and flywoo which not working cause of fried capacitors...like my small firefly nano baby drone isnt working for one capacitor which i know the specs and i have the capacitor but is so tiny i cant solder it ...but my main concern now is the new drone which has THIS flight controller you showing and its half working....i dont know if they refund me or not but i paid a lot and i dont have a drone again after waiting so long too and i m going crazy litterally.....
So I went to the tmotor website and this is not even on their , that is so strange .
Can someone point me in the right direction. I just bought this model and I am unable to get the 10v pit mode to work. Pad is soldered, connections made but I think it’s something with the cli commands I need to enter which I can not find anywhere. Any help is appreciated.
same problem here , have you solved it?
Hey drainman can I use it for fixed wing
you can use every fc for fixed wing. Output = servomode or something like that.
De suzeado! Trap trap trap!
❤️❤️❤️