I got a free 1983 John Deere 116 a couple years back. I use it all the time and it still works great. So far I've just done general maintenance on it and it still fires right up and mows like a dream. Old mower content is sick!
I wish these videos were longer, like 20 minutes. I enjoy these videos more than Rudniks but I understand that you're busy and prefer to get things done off camera.
I just picked up a load of cub cadet tractors. Two 102s, a 108, 1100, and a 1450 all for $500. Even got an extra 12hp engine. All pretty much complete and all should run with a little tinkering.
1966, I was a Technical Writer at the International Harvester Research and Development Center in Hinsdale, Illinois. I put together the parts manual for this model. All drawn by hand on a drafting board. Exploded views of the assemblies. Transmission, etc. I have some original brochures on this model in the drawer in my workshop. If you get back to me, I will give you the documentation to go with this tractor. I am now 77 years old and someone needs to have this before it disappears.
We have technology and materials to build something 10x better but everything is made of Chinesium and has 5yr planned obsolescence. This thing is built as tough as Bigfoot for sure, "Patty" works.
Ooooh baby, thats a good tractor. I have a super LT 1554 with the big kohler engine. Also have an old workhorse power king, not sure what year but its a crawler and a big time puller
Had a mk3 fiesta in the uk and engine swapped it with a 1.8 zetec on bike carbs, the carbs backfired and set fire to whole bay.RIP Maybe a tractor should be my new project lol
Oh wow it rain rains in florida when we have weather like this in the uk it goes constant for weeks and a fair number of rivers burst the banks the weather there reminds me of the weather in cuba though goes from sunny to thunderstorms real quick this time of year
You absolutely have to dig the hell outta Jack. I love the spread of content it’s everywhere from a lawnmower engine powered boat to a 3 rotor rx7 and even a skyline plus E bikes and scooters thrown in for good measure.
I almost scooped a '67 123 Cub Cadet at auction. I was thinking Jack Cecil would love this. I didn't bid since I didn't need it but it was in great shape. I should have bought it, I think it went for $250
Ye F skylines & fast Honda 😂😂😂...2021 is all about trackers & pulling .😅😅😅..awesome jack you keep changing it up & stay safe ...UK England ...p's tracker is sick .....
Before ihc lost the Lil tractor s to mtd and lost the pickups 1975 IHC KNOWEN 4 SLOW HEAVY HAUL HEAVY PULL 2X HEAVYER BUILT THAN ANY TRUCK OR MACHINE ON THE RD WERE NEVER A SMOOTH OR GREAT MPG BUT BEST OF BEST 4 OVER WORKED TRK TRACTOR ANY WHERE
I used to work next to the old administrative building of the company that bought the production site of IHC (International Harvester Company) in germany, after it shut down :D
Nice find Jack! It's definitely a Keeper! (maybe that might be a good name for it? Or #1 ? ) I have over 40 of these and let me tell you, they are Addictive!!! Just call it #1 then there won't be any question on what to name the 2nd tractor. lol or the 3rd. Enjoy your new machine!
I got myself a 1959 Allis Chalmers CA with a bucket set up 👌 Replaced all the fluids and redid all the wiring with new single wire alternator. I use it for snow in the winter, move top soil and an engine hoist lol lived in the city and had old volvos then I moved to the country and had to buy a tractor lol
I’ve got a 1965 model 100 I had to replace the motor on it kept blowing head gaskets. The head bolts would never stay tight so I put a new K301 12 hp on it. Been running that way for about 10 years. Only problem I have now is that the engine revs up high when I go down an incline haven’t been able to figure that out yet?
i just got a 61 original. it runs great has a power lift and does everything it should. the drawback is the engine is a Koehler 7.5 hp. more hp would be welcome.
I have a 1963!cub cadet original with a 7 horse and it has a belt that runs the driveshaft with a 3 speed. It will easily pull a car in first and second with traction being the limiting factor and not horsepower.
I have a creeper gear for that tractor, but a word of advice, put in a zack kerber clutch plate before you start pulling hard with it. I can send you some pics of the carnage it caused when the dogs ripped off of my 102 clutch plowing snow with the back blade! Love these old tractors!
Bro in middle Tennessee you can get a real garden tractor for a couple hundred bucks everywhere I have a 23hp Kohler V-twin engine on a craftsman mower and I have a 16hp Kohler engine too you can have it all but I live about a hr south of Nashville tn
Here in the Netherlands you pay a lot of money for that little tractor. You should leave it like it is. Just clean it up a little. Then he's is keeping his values. Love the video's dude keep it up 👌. Greetings from the Netherlands 🇱🇺🇱🇺
My Gramps had one just like that it also had a detachable bucket mowing deck and that box thing for grading and a backhoe. I so wish that I took it more serious and kept it it was in such good shape garage kept even. Bummed me out.
There you go bud now we’re talking... those are skid steer tires on the back so they should last forever. You can build those motors to make some real power they sell stroker kits and everything.
I'm just waiting for Jack to build a multi engine sled pulling, fire breathing, mountain moving unit!!! Once he has to wear a fire suit to use it then he'll smiling from ear to ear. Keep up your usual shenanigans please sir
You can get a snowplough with a single rotary engine for engine swap. Vargas brothers have one for their golfcart . That would be choice, love the videos jack
Those old cast iron kohlers are a jem. I know you like to tinker, see how slow you can get her to run. Parts are readily available as with any collector market. Unsure about the 102, but the early cadets used the same transmission as the Cub, a much larger tractor so I'd say you're good for what you're doing lol. Congrats and hope to see more content with your newfound hobby!
bro steal frame / an actual rear end housing it looks fantastic the way she shows her scars and bumps i love it/ year i was born 1966 im pretty jealous about this Cub,
You should call it rusty. Almost like dusty🤷♂️
I got a free 1983 John Deere 116 a couple years back. I use it all the time and it still works great. So far I've just done general maintenance on it and it still fires right up and mows like a dream.
Old mower content is sick!
Sounds good!
You should embrace the IHI connection of the 7.3 in the GOB. A decal a least
I absolutely do.
Jack can't be letting Marcus Parks from Parks Racing have a cooler tractor than him
I love the fact that your an all around car guy ..
he’s a hobbyist haha
You must be new here, jack goes hard with anything that has internal fuel combustion 😂
@@lowbxxst even battery power to yo
@@JDMz very true forgot about that.
I wish these videos were longer, like 20 minutes. I enjoy these videos more than Rudniks but I understand that you're busy and prefer to get things done off camera.
Full restoration! I know you said you won't but would make a cool series I think everyone would enjoy.
My dad has two of them that are just like your thumb nail, live in fort Myers FL too he's gonna junk them
you dont junk those old cubs, people will buy them they hold value.
@@HusseinMadiiqSmol ik that but he bought them and ain't done nothin with them and now he just wants them gone, maybe I'll sell them for him
@@HusseinMadiiqSmol both are 1975
Email me jack@horsepowerlogic.com
Now you'll need to get together and build a mini sled to have a pull off and take it to the next truck & tractor pull event
Broooo DIESEL 10HP SWAP PLZZZZZZZZZZZ
I did that too mine not going back
Midwest supercub and Zkbrmachine. You will be able to find anything you want and need between those 2
Hey jack ive got a massey ferguson 12. 1969-1974 what do you think. Its in pretty decent shape. Needs to be fire up and tuned up
Sounds good!!
International🔥🔥🔥 i fell inlove with international after owning a 71-72 scout II 4x4 when i was younger...it was glorious
I just picked up a load of cub cadet tractors. Two 102s, a 108, 1100, and a 1450 all for $500. Even got an extra 12hp engine. All pretty much complete and all should run with a little tinkering.
1966, I was a Technical Writer at the International Harvester Research and Development Center in Hinsdale, Illinois. I put together the parts manual for this model. All drawn by hand on a drafting board. Exploded views of the assemblies. Transmission, etc. I have some original brochures on this model in the drawer in my workshop. If you get back to me, I will give you the documentation to go with this tractor. I am now 77 years old and someone needs to have this before it disappears.
Also acceptable would have been a rear engine Gravely tractor.
We have technology and materials to build something 10x better but everything is made of Chinesium and has 5yr planned obsolescence. This thing is built as tough as Bigfoot for sure, "Patty" works.
I have the same mower model 101 all parts Boeing that everything included for 100 bucks
Ooooh baby, thats a good tractor. I have a super LT 1554 with the big kohler engine. Also have an old workhorse power king, not sure what year but its a crawler and a big time puller
Had a mk3 fiesta in the uk and engine swapped it with a 1.8 zetec on bike carbs, the carbs backfired and set fire to whole bay.RIP Maybe a tractor should be my new project lol
Couple of cans of rustolem rust converter will bring that back up like its 1966!
Now this is what I'm talking about!
Hell yeah! Hit me up on instagram @bubbamyers620 I've brought back tons of these and currently have a 102 mud/racer build.
Haha this thing is sick. Can’t wait to see what you do with it
Oh wow it rain rains in florida when we have weather like this in the uk it goes constant for weeks and a fair number of rivers burst the banks the weather there reminds me of the weather in cuba though goes from sunny to thunderstorms real quick this time of year
Jack you da mannn
Harvest turd 💩 lol. I’m kidding it’s so badass
Ohh if it’s hard to find a real garden tractor there then come to central pa you’ll see a good bit on f old and real garden tractors
Fit a 10hp yanmar l100 then turbo charge it and fit a coal roll mode
Aye jack i got some shaft driven mid 70s bolens that have been stored indoors last 20 years 99% complete asking a 100$ a peice we got 4 of them
All turn over
Jack grab these!! Make 4 race mower go karts from them
Are you in Florida?
@@jacka5676 no mid Michigan
I’d love to have em but shipping would be ugly expensive.
I’ll show you another one for 100 same color same brand
Dads friend has a cub like that. Original paint
You absolutely have to dig the hell outta Jack. I love the spread of content it’s everywhere from a lawnmower engine powered boat to a 3 rotor rx7 and even a skyline plus E bikes and scooters thrown in for good measure.
I almost scooped a '67 123 Cub Cadet at auction. I was thinking Jack Cecil would love this. I didn't bid since I didn't need it but it was in great shape. I should have bought it, I think it went for $250
Yea man. They’re just too damn good.
You have to clear coat that jack the patina is fantastic
Man how baller would it be with a 2 rotor yard tractor 😂
rotten banana. sorry only joke! yeah is cool.
What a coincidence... I’m a 1966 model too. 😁 I don’t run so good anymore though. 🙂
3rd love the vids jack
A full restoration would be pretty cool
You should call the tractor yellow mellow
Ol Rusty. I love him
Even has the original ohio rubber seat! Should make a killer build
Big aussie cut stack !
Beautiful machine
Harvey! The harvester
Looks like a Clyde
Now that sir is a tractor. Well done.
Ye F skylines & fast Honda 😂😂😂...2021 is all about trackers & pulling .😅😅😅..awesome jack you keep changing it up & stay safe ...UK England ...p's tracker is sick .....
That ol Kohler Man, good stuff
o man, jack has the tractor bug hahah great find too !!! love the tractor build ups !! keep up the awesome work man !!
put a 12a in it
Name it rusty😉😉🤣🤣
Jack this is getting out of hand. Love it
Best mod you can do is mill the cylinderhead down 1mm or more if you can.
Guess youtuuube doesnt like the automotive term "s the h down 1 mm or more"
Before ihc lost the Lil tractor s to mtd and lost the pickups 1975 IHC KNOWEN 4 SLOW HEAVY HAUL HEAVY PULL 2X HEAVYER BUILT THAN ANY TRUCK OR MACHINE ON THE RD WERE NEVER A SMOOTH OR GREAT MPG BUT BEST OF BEST 4 OVER WORKED TRK TRACTOR ANY WHERE
So bad ass !
old yeller
Old yeller
Honda HT3813. 13hp liquid cooled engine. Basically a 13hp Civic.
I used to work next to the old administrative building of the company that bought the production site of IHC (International Harvester Company) in germany, after it shut down :D
Harvey
Jack bout to get busy⚡️⚡️⚡️⚡️⚡️💥💥💥💥🤩🤩🤩😂😂🚜🚜🚜🚜🚜🚜🚜🚜🚜
Patina
Classic
Please polish up the badges remake the stickers......keep the patina!!!! Rad old tractor!
Nice find Jack! It's definitely a Keeper! (maybe that might be a good name for it? Or #1 ? )
I have over 40 of these and let me tell you, they are Addictive!!!
Just call it #1 then there won't be any question on what to name the 2nd tractor. lol or the 3rd.
Enjoy your new machine!
I got myself a 1959 Allis Chalmers CA with a bucket set up 👌 Replaced all the fluids and redid all the wiring with new single wire alternator. I use it for snow in the winter, move top soil and an engine hoist lol lived in the city and had old volvos then I moved to the country and had to buy a tractor lol
Cub Cadet just sounds like it's made for CA18DET... Jack i know you can do it.
I’ve got a 1965 model 100 I had to replace the motor on it kept blowing head gaskets. The head bolts would never stay tight so I put a new K301 12 hp on it. Been running that way for about 10 years. Only problem I have now is that the engine revs up high when I go down an incline haven’t been able to figure that out yet?
That is a cool find that cub cadette you found it's a keeper I found a 1984 ,782 diesel cub cadette it runs great
i just got a 61 original. it runs great has a power lift and does everything it should. the drawback is the engine is a Koehler 7.5 hp. more hp would be welcome.
I have a 1963!cub cadet original with a 7 horse and it has a belt that runs the driveshaft with a 3 speed. It will easily pull a car in first and second with traction being the limiting factor and not horsepower.
I have a creeper gear for that tractor, but a word of advice, put in a zack kerber clutch plate before you start pulling hard with it. I can send you some pics of the carnage it caused when the dogs ripped off of my 102 clutch plowing snow with the back blade! Love these old tractors!
Bro in middle Tennessee you can get a real garden tractor for a couple hundred bucks everywhere I have a 23hp Kohler V-twin engine on a craftsman mower and I have a 16hp Kohler engine too you can have it all but I live about a hr south of Nashville tn
Here in the Netherlands you pay a lot of money for that little tractor. You should leave it like it is. Just clean it up a little. Then he's is keeping his values. Love the video's dude keep it up 👌. Greetings from the Netherlands 🇱🇺🇱🇺
ok going to check his channel to see if he got bit by the IHCC bug.. hahhahaha i know i did around 2020 ... up to 7 of them puppies
My Gramps had one just like that it also had a detachable bucket mowing deck and that box thing for grading and a backhoe. I so wish that I took it more serious and kept it it was in such good shape garage kept even. Bummed me out.
There you go bud now we’re talking... those are skid steer tires on the back so they should last forever. You can build those motors to make some real power they sell stroker kits and everything.
Don’t make it a puller. That’s the perfect platform for a race mower. You can lower it easily and engine swap it
I'm just waiting for Jack to build a multi engine sled pulling, fire breathing, mountain moving unit!!! Once he has to wear a fire suit to use it then he'll smiling from ear to ear. Keep up your usual shenanigans please sir
Clear coat the patina but refresh the engine like make the engine spotless, imo that would be cool and maybe will win shows 🤷♂️
I own a running 124, 1968 , just replace the tires.
10hp is good enough. When I had a 6.5hp I worked the motor and it pulled pretty hard.
Looks great jack, I've been enjoying the tractor content. Maybe Tommy the body shop guy can hook you up on a paint job.
Lawn-mater
You should speak to Jared and tavarish. Jared knows all about international Harvester engines 💯
You can get a snowplough with a single rotary engine for engine swap. Vargas brothers have one for their golfcart . That would be choice, love the videos jack
This man taking about this little ass tractor like its a deere 3048R or something lol
Name it Mater like the tow truck from Cars! And you should throw some clear on the tractor and leave the patina!
Sandblast the rust off, rattle can paint job, and swap fluids. Should be good for another 50yrs
Those old cast iron kohlers are a jem. I know you like to tinker, see how slow you can get her to run. Parts are readily available as with any collector market. Unsure about the 102, but the early cadets used the same transmission as the Cub, a much larger tractor so I'd say you're good for what you're doing lol. Congrats and hope to see more content with your newfound hobby!
i am officially the 10k view on this vid! Big up Jack!!!
Bertha
U can run a 16 hp and 14 hp motor they pretty well the same block you juts haft to change the fly wheel and flywheel shroud
bro steal frame / an actual rear end housing it looks fantastic the way she shows her scars and bumps i love it/ year i was born 1966 im pretty jealous about this Cub,
Can this one be 4x4....? If so then you'll kick some real ass in tug a war
Thats from when they built things to last forever instead of the garbage we get today nice find jack
Jack. I have one ready to go
Email me! Jack@horsepowerlogic.com
Hey Jack those old IH cubs are by far the best pullers. If you need any parts look up Mid-west Super Cub they sell all of the best parts