I had a Romeo zero that scratched up immediately and effected my vision. SIG replaced it with the zero elite at no extra charge and it showed up within 24 hours of them receiving my old one. GREAT WARRANTY
Ps.. I know I said “I didn’t change the battery yet” but in the beginning I said I did, I installed a new battery before attempting to fix the tab. After it still didn’t work I then tried to fix the tab. Just to be clear.
Mine did same. Went through 3 batteries in 4 months… it wasn’t just the tabs though. Each battery lasted like 3 weeks to a month and then I tested those batteries with my voltage meter… 2 were fully drained. One was still good so I put the battery back in and now I have a reticle but I also now can’t change brightness or the between the reticles…. Also mine doesn’t seem to shake awake because it doesn’t seem to turn off. Not sure if this was doing this before or just now
I just one of these on a P365 x Macro and it does not wake up when the gun goes in motion......i can push the button to get it to trun on, but after its still for like 20 seconds it turns off, and wont come back on. I cant also get it to flash to change the reticle option, but tapping it does nothing, and then it stops flashing. 20 minutes into this sight and I already hate it.
@@chickchickboom324 I noticed the same battery connection issue - What was your "fix"? I tried bending it out and everytime I put it back together its the same story.
I had to bend it so the tab made good connection with the battery like the other two prongs. Kind of up I guess but the point is to make it have good contact
Also…. I did have to push and hold down the button with a tool for 2 seconds to turn it on. Then it works with the “shake awake”
I had a Romeo zero that scratched up immediately and effected my vision. SIG replaced it with the zero elite at no extra charge and it showed up within 24 hours of them receiving my old one. GREAT WARRANTY
Shhhhh….
Sig has the best customer service I've dealt with.
Ps.. I know I said “I didn’t change the battery yet” but in the beginning I said I did, I installed a new battery before attempting to fix the tab. After it still didn’t work I then tried to fix the tab. Just to be clear.
Mine did same. Went through 3 batteries in 4 months… it wasn’t just the tabs though. Each battery lasted like 3 weeks to a month and then I tested those batteries with my voltage meter… 2 were fully drained. One was still good so I put the battery back in and now I have a reticle but I also now can’t change brightness or the between the reticles…. Also mine doesn’t seem to shake awake because it doesn’t seem to turn off. Not sure if this was doing this before or just now
Yea that sounds like a call to sig..
Mine did the exact same thing. Bent the tab up and it’s working again
Have you shot it since too?
@@chickchickboom324 going this weekend, I’ll keep you posted. Just fixed it last night. Definitely seems like a manufacturing defect
@@chickchickboom324 crapped out on me again. Looks like I’ll be shopping for a better option
@@bobbyburch410 might have to see about sending it in for warranty
@@chickchickboom324 definitely looking into it. This is my edc so I definitely need to fix this somehow. I’ll keep you posted on what they say
I just one of these on a P365 x Macro and it does not wake up when the gun goes in motion......i can push the button to get it to trun on, but after its still for like 20 seconds it turns off, and wont come back on.
I cant also get it to flash to change the reticle option, but tapping it does nothing, and then it stops flashing. 20 minutes into this sight and I already hate it.
Yea… I’m not sure why they can’t get it right
@@chickchickboom324 I noticed the same battery connection issue - What was your "fix"? I tried bending it out and everytime I put it back together its the same story.
@@etzioschmetzio2168 I think the fix if that don’t work would be sending it in to sig and let them fix or replace it.
*update* reached out to Sigg warranty department and they had me send it to them, postage paid for. They sent me a brand new one
I’ll probably have to do the same. Even tho it works now my guess is it won’t for long
Did you bend you battery piece up or down.?
I had to bend it so the tab made good connection with the battery like the other two prongs. Kind of up I guess but the point is to make it have good contact
How did you bend the tab??
With a pick tool
Does the shake awake and sleep work?
Yes
@@Iwasneverhere7 call Sig