sir kung mag eedit ng cpID Kailangan mo pa bang i format laman ng Arduino o diritso na edit at upload? halimbawa may na program kanang unang cp ID at i trytry mo naman sa ibang device model
sir ask ko lang po pano po pag di madetect ung ipad na ibbypass ko ? sa usb host shield pero na set up ko naman ng ocmplete at walang failed di pa rin an dedetect ? kahit di naka dfu mode
question boss. installing ako ng arduino sa macbook. sa git apply patch eto na kuha ko error error: patch failed: Usb.cpp:201 error: Usb.cpp: patch does not apply error: patch failed: UsbCore.h:104 error: UsbCore.h: patch does not apply san kaya problems nito?
Boss pag ung arduino uno nagagamit na sa windows using ideputa. Pano ung setup pag sa macos ko gagamitin ung arduino need pb ng exploite or pwede ko na gamitin sa sliver
Sorry na mis read ko query mo..iba po process mg ipod 6th gen.. no need na nyan ng Arduino. Checkrain jailbreak lang then bypass mo either ibypasser,or frp file or etc
Sir ask ko lang need paba idownload ung xcode kasi lumalabas pag mag git clone nako. "No developer tools were found at" ung error sa terminal. Salamat po
upload done na sa akin ng .INO pero pag arduino to ipad2.2 walang nagyayari nglagay din ako ng LED PERO ayaw din gumana, anong maaring sira nito mga kaibigan. TIA sa mga sasagot
@@SimplyTechKey teacher thanks for the answer, and excuse another question, what operating system could I use I understand that hig sierra or sierra? Do you have a video where I teach how to do a dual boot with that system? i bought a ssd just so i can install the mac system, but i don't have a mac to download the iso, is there any other way to get it?
Sa mga electronic diy mo, madami gamit yang Arduino . Kung about naman sa iphone device tanong mo po. Limited po yan sa mga a5 Devices like ipad mini 1 , ipad 2,3,4 and etc
Arduino: 1.8.13 (Mac OS X), Board: "Arduino Uno" In file included from /Users/yhazboy23/Desktop/checkm8-a5/checkm8-a5.ino:4:0: sketch/constants.h:2:17: note: #pragma message: Building for A5 S5L8942X #pragma message "Building for A5 S5L8942X" ^~~~~~~~~~~~~~~~~~~~~~~~~~ Sketch uses 7892 bytes (24%) of program storage space. Maximum is 32256 bytes. Global variables use 807 bytes (39%) of dynamic memory, leaving 1241 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00 Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. boy my ganyang error akong nakukuha
excuse me boss, I want to ask, I want to bypass my ipad mini 1 using Arduino Uno, at the step when I uploaded the synakuk checkm8 was successful, after that I unplug the Arduino from the laptop, after I unplug it I put my ipad into dfu mode, and I left it I continue to input the laptop into the host shield port on Arduino, after that I plug Arduino into my Mac ... but there is no LED light blinking or turning on ... what's the cause?
Idol light problem pa din sakin baka may idea ka kung pano paganahin ang blinking nun naka 6 na led na ko pero ayaw pa din haha..hininang ko na yung 2 pin ayaw pa din eh..
Ah.. nagana naman pala.. yun nga lang parang hinuhulaaan mo lang kung naka pasok naba sa dfu o hindi.. ☺️ hnd ko rin masagot kung bakit ayaw umilaw ni led sau eh.. pero tama naman terminals no.. hnd naman baliktad? King may tester ka test mo yung sinasaksakan ngvled kung may boltahe.. yun pinaka magandang gawin sir
Nag try po kasi ako sa ipad 2 okay nman then nagpalit po ako cpid for ipad 3 8945 blink 3x and solid red .. pero sa sliver po ayaw nman po lahat po ng sliver na try ko ayaw din po pero sa ipad 3 lng nman po
rduino: 1.8.13 (Mac OS X), Board: "Arduino Uno" Multiple libraries were found for "Usb.h" Used: /Users/roy/Documents/Arduino/libraries/USB_Host_Shield_2.0 checkm8-a5:4:10: fatal error: constants.h: No such file or directory Not used: /Users/roy/Documents/Arduino/libraries/USBHost #include "constants.h" ^~~~~~~~~~~~~ compilation terminated. exit status 1 constants.h: No such file or directory
@@SimplyTechKey na install ko naman ang usb host sir,check ko rin sa ducuments/arduino/libraries andun naman usb host shield at usb host.okay din naman ang port ko wala din error sa installation,dito lang talaga error uploading.
@@SimplyTechKey yes sir,meron power ginagamit ko sa windows ko using ideputa. try ko naman install sa mac ok naman installation ginaya ko ginawa mo wala naman error di ko alam san my problema nito.
@@SimplyTechKey sir,salamat ok na inulit ko lang kaya pala marami error ginamot checkm8 ni alexdandy inulit ko ginamit ko synackuk gumana na ngayon salamat.😍
please anyone put a link for adruino tool I cant order it from my country bcz the shipping charge is very expensive,iam fro m srilanka and sorry for the bad eng. I tried to buy from Arrow.com
Ako rin po sir pahelp po kaso wla ako gnyan Arduino tools po Activition Lock kasi un Mini IpAd ko eh pwde po pahelp turuan ninyo ako ppaanu po my Compture nman po ako dito pero Hp laptop po siya.
Reiboot Password: Simply123
naka mac book ka ba? o windows laptop. pero gamit usb mac os?
@@CityHunter2025 naka hackintosh ako sir. Dual boot mac and windows
thank you idol muntik ko ng itapon😂😂buti nakita ko itong video☺️
Tanks boss swak sa tuturial mo parehas na parehas salamat more power power
Pwedi po ba sa ipod touch 5th Gen sa 2024?
Boss pwede po ba ito sa iPad Mini 2?
boss tanong q lng kung gagana ba yang sliver sa naka dual boot lng na macos highsierra.
Boss pwede ko ba install ang arduino uno sa pc para pang bypass rin. Walang Mac Laptop or can you do a Hackingtosh, thank you in advance
Boss baka pwede mag pa delete ng apple id and password syo ng ipod touch 5th gen?
Saan ka pwede puntahan?
hi, does it work aswell with Arduino mega 2560?
Nice bro 👍💪👍
pwede po ba sya sa any kind of macbook old macbook po ksi gamit ko mac os yosemite.thanks sir
Hnd po
Highsierra or mojave
@@SimplyTechKey ok po thanks sir
Sir, mackintosh gamit nyo? Pano nyo po napa ddetect yung arduino? Sken kasi ayaw ma detect.
Boss compatible po ba sa hackintosh mac dito? pinapafollow ko ngayon yunh hackintosh tutorial mo
Yes po 100 percent
bossing ano po gamit nyo na mac os po? mag iinstall po sana ako sa pc ko pang bypass purposes po... amd athlon po 4gb ram at paano iinstall
yung apple Ipad Mini ko ang error is unable to active or ACTIVATION ERROR. mareresolve ba sya gamit ang method na ito? salamat sir.
tnks bro
Sure no problem 👍
sir tanong ko lng. everytime ba mag bypass kailangan gawin ulit lhat ng pag set?
Hnd na.. as long na same cpid po..
Kung ibang cpid ,edit mo lang cpid then upload..
Bos bka meron kyu tut din para sa hackintosh na paginstall sa desktop or laptop wla po ako kse pambili ng mac nakita ko po kyu nakhackintosh slmat sir
meron na ako dito sir sa channel ko
Boss pwede ba tutorial andruino sa windows 10 laptop?
sir kung mag eedit ng cpID Kailangan mo pa bang i format laman ng Arduino o diritso na edit at upload? halimbawa may na program kanang unang cp ID at i trytry mo naman sa ibang device model
Deretso na no need ng ireset ang Arduino
Hi where can im all the things buy in europe?
Can this be done with windows os?
sir ask ko lang po pano po pag di madetect ung ipad na ibbypass ko ? sa usb host shield pero na set up ko naman ng ocmplete at walang failed di pa rin an dedetect ? kahit di naka dfu mode
sir baging subscribe nyo po ako .hehe pano po pala pag sa windows .newbei lang po ..salamat
sir pg ng order bko niayn ksma n ung red light po?
Thanks sa tut mo idol magkano total gastos mo jan tska pwde ba ipasok lahat ng exploit ng A5,6,7
Paisa isa lang sir.. sa setup inabot ng mga 650 pesos
question boss. installing ako ng arduino sa macbook. sa git apply patch eto na kuha ko error
error: patch failed: Usb.cpp:201
error: Usb.cpp: patch does not apply
error: patch failed: UsbCore.h:104
error: UsbCore.h: patch does not apply
san kaya problems nito?
Boss pag ung arduino uno nagagamit na sa windows using ideputa. Pano ung setup pag sa macos ko gagamitin ung arduino need pb ng exploite or pwede ko na gamitin sa sliver
No need na kasi may exploit na yan . Nagamit mo na eh.. bali sliver nalang need mo
Sa shopee po ba meron nito???
Kasi pag lazada po kasi ang mahal ng shipping sa saamin 🥺
Sir hininang mo ba yan sa loob ung signal light?
Hnd po.. naka tusok lang yun
Thank you!
Your Welcome 😊
boss baka pwede po pa update ng link sa lazada store baka po kasi mali mabili. samalat
dcsd cable is required for this metohod ?
No.. for bypass .. you don't need any dcsd...
Sir anong exact model po ng iapd mini nyo po ? 1432 po ba ?
Yes sir
Sakin di nagana sir bakit kaya ayys . Mag reinstall nga ako ng highsierra
Nag error po sakin sa last part yung drag ko yung usb host library.patch. Ano po gagawin ko
dol ano problema pag saksak cable to arduino di parin ma pwned? pero pag inexploit naman done naman,
Check mo baka hnd tugma cpid
Pag bumili ng usb host shield kasama na yang led?
Hnd po
@@SimplyTechKey san po maka bibili niyan
Hi Tech Do you have a video for ipod touch 6th Gen? I have already bypassed my 5th gen using arduino, is it the same procedure? ps just subscribed
It has the same procedure
@@SimplyTechKey Thank you does it have the same cp id number? I have tried but till now nothing. Thank you for the quick reply its much appreciated
Sorry na mis read ko query mo..iba po process mg ipod 6th gen.. no need na nyan ng Arduino. Checkrain jailbreak lang then bypass mo either ibypasser,or frp file or etc
@@SimplyTechKey Hi Thank you once again i will try that....cheers
IPad mini 1st gen A1432 does this work for that iPad?
kuya pwede naman po ba arduino sa macbook air 2017?
Basta highsierra that will work..
Actually hnd naman arduino ang problem.. kundi yung sliver hnd mo mapapagana
@@SimplyTechKey macOs Catalina po ako now? kaya po ba nun?
@@kstuff3053 hnd po
@@SimplyTechKey ask ko lang din po ulit if okay na po yung arduino uno if naconnect ko na sa "/dev/cu.usbserial-1420" and na upload ko po yung blink.
Sir ask ko lang need paba idownload ung xcode kasi lumalabas pag mag git clone nako. "No developer tools were found at" ung error sa terminal. Salamat po
Yes po
Salamat po! Okay na po
@@gabotabo5142 nice.. congrats
pano po makukuha yung finder apps?
ano cause boss error sa manage libraries don palang sa downloading libraries
dun po sa dulo nag kakaroon ako ng error dun sa apply usb host library.nakalagay po no such file or directory
upload done na sa akin ng .INO pero pag arduino to ipad2.2 walang nagyayari nglagay din ako ng LED PERO ayaw din gumana, anong maaring sira nito mga kaibigan. TIA sa mga sasagot
what if i dont have usb host shield only arduno uno
If u don't use how will you connect the idevice to your arduino?
@@SimplyTechKey haha sry
Boss yung akin ayaw mag inject yung checkm8 a5 from adruino to device.. goods naman usb host shield ko thanks boss
@@poponglangka6172 depende sa device . Minsan may makunat talaga lalo na sa ipad 2
Excuse me master, can you use arduino, some virtual macOS or a macintosh? someone did it
Yea that will work.. actually i am using Hackintosh
@@SimplyTechKey teacher thanks for the answer, and excuse another question, what operating system could I use I understand that hig sierra or sierra? Do you have a video where I teach how to do a dual boot with that system? i bought a ssd just so i can install the mac system, but i don't have a mac to download the iso, is there any other way to get it?
Did you find a way to do this I’m trying to bypass my iPad mini 1
Pano yung sakin walang nakalagay na Xcode
Paano iboot an widows to hackintosh po?
need naka uefi ka. clover bootmenu, then choose your windows disk
boss pano download yung os
master. wala kng video paano e install ung led ng arduino?
nadaanan ko sa video na ito yan
1:28
link boss san mo nabili
naka try kana sir ipad 2 mn mid 2012
Oo ..
Kuya Simply Tech-Key kahit saan po pwde gamitin po yan ..txtbck
Sa mga electronic diy mo, madami gamit yang Arduino . Kung about naman sa iphone device tanong mo po. Limited po yan sa mga a5 Devices like ipad mini 1 , ipad 2,3,4 and etc
Arduino: 1.8.13 (Mac OS X), Board: "Arduino Uno"
In file included from /Users/yhazboy23/Desktop/checkm8-a5/checkm8-a5.ino:4:0:
sketch/constants.h:2:17: note: #pragma message: Building for A5 S5L8942X
#pragma message "Building for A5 S5L8942X"
^~~~~~~~~~~~~~~~~~~~~~~~~~
Sketch uses 7892 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 807 bytes (39%) of dynamic memory, leaving 1241 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
boy my ganyang error akong nakukuha
Problème to download chekm8
Sir may error sa pag upload pwede ba kita maichat?
lods nag pm poko s fb page mopo
sir hindi ko makita yung synackuk checkm8
Good day po sir.. error po sakin sabi
H:No such file or directory
Salamat po
Same boss nafix mo na ba? Pahelp boss
excuse me boss, I want to ask, I want to bypass my ipad mini 1 using Arduino Uno, at the step when I uploaded the synakuk checkm8 was successful, after that I unplug the Arduino from the laptop, after I unplug it I put my ipad into dfu mode, and I left it I continue to input the laptop into the host shield port on Arduino, after that I plug Arduino into my Mac ... but there is no LED light blinking or turning on ... what's the cause?
Did you get this to work?
lods ayaw lumabas ng port sakin. di din mabasa ang board. kalungkot, sira ata nabili ko
alternative checkm8-a5-master download boss di ako makadownload sa site
drive.google.com/file/d/1NJHzvTym2yIMhkkAYIL8y2rOBu2d_-00/view?usp=sharing
Anong meaning boss kapag ayaw sumindi nung led?
check mo led kung hnd pundii o baka baliktad
@@SimplyTechKey hindi naman baligtad boss, wala din power sa usb port
@@bulaunivankaine3325 watch nyo po trouble shootings ko jan . May video ako nyan dito sa channel
@@bulaunivankaine3325 ua-cam.com/video/Ie9mLYeV4nY/v-deo.html
Shopee link din po plss 🥺
Probably meron din sa shopee.. gawin nyo nalang reference yang lazada..
how t fix error while loading exploit?????????
windows tutorial po sana thank you
Walang pang windows as of now.. meron bagong labas kaso may bayad.😁
Idol light problem pa din sakin baka may idea ka kung pano paganahin ang blinking nun naka 6 na led na ko pero ayaw pa din haha..hininang ko na yung 2 pin ayaw pa din eh..
Pero na uupload naman yung exploit?
@@SimplyTechKey oo idol nag eh exploit nman..
@@SimplyTechKey oo idol nakaka bypass din..pero iba pag may ilaw madali malaman kung pumasok oh hindi hihih.
Ah.. nagana naman pala.. yun nga lang parang hinuhulaaan mo lang kung naka pasok naba sa dfu o hindi.. ☺️ hnd ko rin masagot kung bakit ayaw umilaw ni led sau eh.. pero tama naman terminals no.. hnd naman baliktad? King may tester ka test mo yung sinasaksakan ngvled kung may boltahe.. yun pinaka magandang gawin sir
Pag upload bossing. Error sya constant.h no such file or directory pahelp boss
Paano nga uli makita CPID sa terminal?
Boot ka sa dfu manually, then go to sliver choos a6 bypass and iphone 5 then boot dfu then lalabas doon yung cpid ng ipad mo
Simply Tech-Key okay. Thanks meron din yung command sa terminal eh. Nakalimutan ko na. Huhuhu
Error po Yung gethub USB shield ko Sabi is unavailable update for software
Xcode po
cant pwnd into dfu mode
Asan po yung sa guthub bat diko makita pa send po ng link :(
no such file or directory.. sinunod ko naman yun procedure
sir pa tulong nmn po nag eeror po pag paste ng 1st command.. "
Check mo host shield ko kung may power
Saan ang Sliver setup...walang link :(
boss tanong lang po same lang po ba process ng iPad 3? thank you po
Yes cpid lang babaguhin
Nag try po kasi ako sa ipad 2 okay nman then nagpalit po ako cpid for ipad 3 8945 blink 3x and solid red .. pero sa sliver po ayaw nman po lahat po ng sliver na try ko ayaw din po pero sa ipad 3 lng nman po
idol pa help bat ayaw umilalaw ung sa host shield
Watch my video how to troubleshoot
Boss pahelp not reconized sa windows yung arduino.
Mac lang po
Its saying constants:h : no such file or directory...how to fix?
lods naayus muba yung sayo? same problem saken
pabulong nAman
Sir pa help po bakit walang serial port sakin na arduino uno . Ung dalawa lang po meron
Wala yung arduino uno?
Baka hnd binasa ang arduino ng pc mo sir
Wala po sir e ano kaya posible na problema . Pero nailaw naman po ung arduino pag sinalpak sa pc
Ung port lang po tlga di nadedetect
Wala po bang iinstall na drivers sa mac ?
sir not working sa iphone 4s
Working po yan
list po ng cpid!
Sir pahelp po ako
rduino: 1.8.13 (Mac OS X), Board: "Arduino Uno"
Multiple libraries were found for "Usb.h"
Used: /Users/roy/Documents/Arduino/libraries/USB_Host_Shield_2.0
checkm8-a5:4:10: fatal error: constants.h: No such file or directory
Not used: /Users/roy/Documents/Arduino/libraries/USBHost
#include "constants.h"
^~~~~~~~~~~~~
compilation terminated.
exit status 1
constants.h: No such file or directory
Problem sa usb host
@@SimplyTechKey na install ko naman ang usb host sir,check ko rin sa ducuments/arduino/libraries andun naman usb host shield at usb host.okay din naman ang port ko wala din error sa installation,dito lang talaga error uploading.
Kamusta host shield mo po. May power ba?
@@SimplyTechKey yes sir,meron power ginagamit ko sa windows ko using ideputa. try ko naman install sa mac ok naman installation ginaya ko ginawa mo wala naman error di ko alam san my problema nito.
@@SimplyTechKey sir,salamat ok na inulit ko lang kaya pala marami error ginamot checkm8 ni alexdandy inulit ko ginamit ko synackuk gumana na ngayon salamat.😍
please anyone put a link for adruino tool
I cant order it from my country bcz the shipping charge is very expensive,iam fro m srilanka and sorry for the bad eng.
I tried to buy from Arrow.com
try ebay
Or amazon
sir pa help aka sir
Ano problem sau sir?
Ako rin po sir pahelp po kaso wla ako gnyan Arduino tools po Activition Lock kasi un Mini IpAd ko eh pwde po pahelp turuan ninyo ako ppaanu po my Compture nman po ako dito pero Hp laptop po siya.