can you help me? my watch doesn't start. I have downloaded an update and it does not start. I have entered the menu that you show in the video but I do not have those options, I only have the option to restart or turn off
If you can go to the menu, and you can stay there, so it means your watch powers up and works. Probably the firmware is corrupted. Go to links find your watch model firmware and replace the firmware.
Please, I'm trying to do the procedures but the watch can't found for PC, you can see heard the sound that windows detecting the USB but in the devices management the USB not works... sometimes the Odin can see at COM 3 but always error fails happens. Can you help me?
Wait...can i use the same cable that i did on watch but with a different firmware for watch and the same app u used in the vid or do i have to find like a new app and firmware??
Hey, I've already tried NetOdin flash, because my battery drains in less than 4 hours, and when I try to do factory reset, it comes back to my customs apps, watchfaces, like nothing happened. NetOdin flash does the same that a factory reset, it comes back like nothing happened. There's any difference between this USB method and WiFi Odin? It will revive my smartwach?
If u hold power button it should say rebooting then hit power 3 times u should still be able to get to the wireless download screen then use power button to go to wireless download option & hold it down ,the hit power button 2 more times & u should be in ap mode ,u can then connect ur watch to ur computer using netodin3 😊
Hi There is there anyway you can share the S2 SM-R732 Firmware file for me. i am unable to buy the softwarwe at this moment in time. your help will be much appreaciated.
I have disarmed the clock soldered the cables and connected to the PC (windows 10) with Odin v 3.13 The Gear continues on its rebooting loop until it finishes its battery. What is not clear to me is: How do I put the Gear in "download" mode? Because if it is not in the rebooting loop it is because it finished its batereia. Some experience ?
Turn off your Samsung Gear off. Press and hold the Power key until REBOOTING displays at the bottom of the screen. Press the Power key repeatedly until the Select REBOOT MODE screen displays. Press the Power key to highlight ‘ Download mode’.
This is exactly the video I need to fix my gear s2. However, I went to the website and when I select the SM-R720 model for the firmware, it says it is out of stock. Would it be possible for you to either restock it on the website, or email it to me? Thanks!
HI Habib, does Samsung Sport has the same configuration for the USB connection? And can you please advise where can i download firmware for SM-R600? Thanks much
My S2 went into a boot loop after trying to reload firmware via wifi download. So, I soldered a cable as described in the video. Odin does not find the watch using 'Download' mode. I can no longer get the 'Download WiFi' to work. Interestingly, after my watch drains the battery going through an endless bootloop it does show the 'lightning bolt charging screen' when I replug it into my computer's USB port. This makes me believe the soldered connection is working (at least for power). So, what am I doing wrong? Do I need a specific version of Odin? Special USB drivers?
Hi, if you solder the wires right, So the ODIN software will recognize your watch. When you are using only "Download mode" so you will need ODIN software. If you are using "Download wireless" you need to use ""Wifi Net Odin". So for each mode there are two type of ODIN. Hope this help.
@@anwarigroup I'll resolder wires again to see if that helps. I used the Wifi Net Odin for my original wifi download that bricked my S2. I have been using the regular Odin with the USB cable. I hope I can get this to connect. Also, any lead to the US version of the S2 firmware. I have a version but it is the one that bricked my S2. So, I would like to find a different source. Thanks.
Same firmware will be ok. Two wires are negative and positive and two data cable. 1- Check the wires by a multimeter. 2- install Samsung usb drivers 3- try with other computer 4- use ms window 10 or 7
@@anwarigroup After carefully resoldering my Windows 10 PC now recognizes the S2 as a USB device but I get a 'Unknown USB device (device descriptor request failed). This is listed under the Device Manager with the same text. Odin does not recognize the S2 at all. I went ahead and ordered a Galaxy Watch today as a replacement. I might try to use an entirely different cable and resolder one more time. And, using a different computer yielded the same result. I think this S2 is really bricked!
Hello I have a samsung watch SM R600 gear sport Since a few days it does not work anymore. I put it to charge, it heated up. And now when I put it on the charger, the logo "samsung gear" lights up and then it goes out and impossible to light it. Could you help me find the fault Thank you Desolate for my english I translate with google
Hi, Yes, First see if you can put your watch into download wireless mode. And see if it is staying in wireless download mode. If not so The Problem can be with the battery. And or Main board. So open your watch and change the battery and recheck.
Thank you impossible to download in wifi The watch is blocked when I put it on the charger the logo appears and disappears. I test the battery it is 3.8v I think it's good. Thank you for helping me
Nice job! Please Could you drop link or overview Samsung Gear Sport Pinout motherboard!?!?! Same problem download wireless is not working, can enter download by wire only! Help please!
Hey mate could you please send me the firmware? I will give you my email as soon as you respond. My gear S2 battery started to only last 4 hours since 2 weeks ago, I tried resetting it and it was was stuck in reboot loop. Now just today it was stuck in a boot loop and it will not even start. It will stay on Samsung gear S2 loading screen untill battery dies.
Hi, I will send you the firmware, please use below link, post your request there. electrovo.co.uk/unbrick-samsung-gear-s2-classic-reboot-loop-stack-in-reboot-cant-install/
Thanks Alan for your support. Please visit this link for more information: electrovo.com/unbrick-samsung-gear-s2-classic-reboot-loop-stack-reboot-cant-install/
I already have the wire soledered and I have odin 3.13 I download the firmwares from your web but when I press the start, I have a fail becuase Re-Partition operation failed, I tried in other computer and i have same issue. Do you have any idea to solve it?
Hello, Habib. I have problem with my gears S2 classic (sm-r732 A3LSMR732). (reboot loop) I don't have pay pal. Could you help ? where can I download firmware for my watch?
Hello, I have seen alot of your videos. And I have a samsung gear s2, which has accidentally a wrong firmware installed to it. I was wondering if this method would help fix that?
Hi, Yes this method will work. If your wireless option works so use wireless option. otherwise use the Download wireless mode. but for this, you need to solder 4 wires.
@@anwarigroup ok. Yeah, my wireless download mode doesnt work, but for regular downlaod mode, I cant get it to download mode, watch is stuck on "downloading, do not turn off target" after the wrong firmware was installed. Do I have to do something special to get to the options screen and turn on download mode, or will it work from the screen :"downloading, do not turn off target"?
@@anwarigroup also, my watch currently when put on charger just flashes white screen and when buttons pressed, opens up "downloading, do not turn off target". And my watch is not locked and doesnt need reactivation unlocking. So after I solder wires, do I just plug into computer, open Odin, and install the 3 files (csc, ap, bl) and not install combination file? Because in one of ur videos u first installed combination file and that turned on ur watch and then u put it in debugging mode , then u installed those 3 files. Do I need to do that? Or do I just install 3 files without going into debug mode, cuz my watch doesnt work and I cant access any menu to turn it on, becuz watch is stuck on : " downloading do not turn off target" (Note: the downloading do not turn off target screen doesnt have the little writing like urs does at the top)
@@anwarigroup but I cant, it doesnt move from the screen "downloading do not turn off target". This screen first came when the watch had the wrong firmware installed on it. And it's been there since. Doesnt change
Hello, i have a problem witch my Samsung Gear S2 R720. (my english not very good, sorry) In my Gear S2 not working Wireless Download Mode, because when flashing the wrong file, wireless mode brick. Working Only USB Download mode. what to do, would you send me files to r720? Please Answer. (p.s: [translated by google] It started with a mistake through which you could not install ANY application from the store, when the flash mode stopped working wireless mode, and the problem has not disappeared)
Hi Bro, while trying to change the country by chance I have flashed it with the wrong firmware and now it cant start or recover, it or power off but it vibrates and blinks with this message Pleases help me bro plzzzz...
Hello dear, I've active2, now it's stuck in ODIN mode and failed to go to download(wireless menu), i'm trying to connect it to odin using cable but the watch connector is 6 pins, any solution or suggestion?
@@ahmedwalied9649 they didn't charge anything My pins where ok Don't know exactly what will happen in your case I assume you should go and don't go into details about what happen If they are gonna charge you fee, they should inform you first so don't get panic
I do not get the "Added!" in the Odin: So far I know that when I plug the clock into the computer through the cables that I have soldered while the clock is discharged, it is activated by starting the rebooting loop as usual. This tells me that at least I have welded the cables well that the electrical winding of the clock corresponds. How can I know if the data cables are also well-welded? How can I know if the drivers are my windows and are correct and work well?
Did this work for u? I have a samsung gear s2 which is stuck on download mode , do not turn off target because a wrong firmware was installed. Will it work to fix my issue?
can you help me? my watch doesn't start. I have downloaded an update and it does not start. I have entered the menu that you show in the video but I do not have those options, I only have the option to restart or turn off
If you can go to the menu, and you can stay there, so it means your watch powers up and works. Probably the firmware is corrupted. Go to links find your watch model firmware and replace the firmware.
I have a Samsung watch 3 SM-R845X I can't find the Pinout diagram anywhere online...any help?
Hi, I can help you. send me an email as not possible to help you from here. Visit the links in descriptions.
Is it possible i can send my Samsung Gear S2 to for firmware update. I'm having reboot loop problems
Please, I'm trying to do the procedures but the watch can't found for PC, you can see heard the sound that windows detecting the USB but in the devices management the USB not works... sometimes the Odin can see at COM 3 but always error fails happens. Can you help me?
Wait...can i use the same cable that i did on watch but with a different firmware for watch and the same app u used in the vid or do i have to find like a new app and firmware??
Nice video.
Is there a different procedure for a watch running Tizen?
I have a Samsung Gear 2 in a boot loop, any ideas?
Thanks!
Try to repair the software by download wireless mode or download mode and Check the battery, Change the battery.
Do you have it for Samsung Sport? Your electrovo link is broken.
Hi, you can visit now its running now.
Hey, I've already tried NetOdin flash, because my battery drains in less than 4 hours, and when I try to do factory reset, it comes back to my customs apps, watchfaces, like nothing happened. NetOdin flash does the same that a factory reset, it comes back like nothing happened.
There's any difference between this USB method and WiFi Odin? It will revive my smartwach?
no, got the same problem, tried flash via usb and no change, like nothing happened , my old messages everything is frozen
Hello, question in the firmware package includes the Odin or it is an external software I need to buy?
No
Hey, did it end up working for u? Does ur watch work now?
@@parthpatel5532 it works. Try it,
Hi,my name is Jimmy,I have a samsung gear sport,it keeps rebooting until it runs out of battery,how can I fix this,please assist,thank you.
If u hold power button it should say rebooting then hit power 3 times u should still be able to get to the wireless download screen then use power button to go to wireless download option & hold it down ,the hit power button 2 more times & u should be in ap mode ,u can then connect ur watch to ur computer using netodin3 😊
Hi There is there anyway you can share the S2 SM-R732 Firmware file for me. i am unable to buy the softwarwe at this moment in time. your help will be much appreaciated.
sorry little busy, please refer to links
do you know the how to unbrick active 2 ? or the pattern of the cables in the hardware of active 2
I have disarmed the clock soldered the cables and connected to the PC (windows 10) with Odin v 3.13
The Gear continues on its rebooting loop until it finishes its battery. What is not clear to me is: How do I put the Gear in "download" mode? Because if it is not in the rebooting loop it is because it finished its batereia. Some experience ?
Turn off your Samsung Gear off.
Press and hold the Power key until REBOOTING displays at the bottom of the screen.
Press the Power key repeatedly until the Select REBOOT MODE screen displays.
Press the Power key to highlight ‘ Download mode’.
Do i need install special usb drivers to do this proccess?
I have windows 8, it works on this version?
Try to install samsung drivers.
Do you have a link where I can find them?
@@sami22 google samsung drivers download and download them from samsung website.
@@sami22 developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Did it end up working for u?
Is this the same for active watch 2?
yes
Hi my watch model Sm-R720
This watch stacking on Samsung only how can I fix it
Can u give me links to download those file please
Try to reset from the boot menu. Otherwise flash updated firmware. Find links on descriptions for download.
Great video, does your firmware work for gearfit2 pro as well? (I have the same error message)
Yes it does. Lockup the right model from back of your watch as SM-Rxxx
@@anwarigroup any diagram for the gear fit 2? to know how to sold them
This is exactly the video I need to fix my gear s2. However, I went to the website and when I select the SM-R720 model for the firmware, it says it is out of stock. Would it be possible for you to either restock it on the website, or email it to me? Thanks!
Hi yes I will do it tomorrow for you
Thank you!
Hi, I have updated the link if you downloaded if from somewhere else its ok, if not so links now working and stock is full. Thanks :)
this can be done through the wifi mode
Anything for the Gear S3 SMi 765V LTE is this something I can buy???
are you looking for something?
HI Habib, does Samsung Sport has the same configuration for the USB connection? And can you please advise where can i download firmware for SM-R600?
Thanks much
Hi, We are working on website, I will inform you when it fixed.
Thanks
@@anwarigroup thanks bro. How about firmware? Any info? Jazakallah
Hi, You can visit now its running. www.electrovo.co.uk
i have a galaxy watch active 2 it doesn't work in wireless download mode and i can't use odin
You need to open your watch and solder 4 wires and then use odin.
@@anwarigroup I have decided to take it for assistance, I am not able to open it and do some welding.
My S2 went into a boot loop after trying to reload firmware via wifi download. So, I soldered a cable as described in the video. Odin does not find the watch using 'Download' mode. I can no longer get the 'Download WiFi' to work. Interestingly, after my watch drains the battery going through an endless bootloop it does show the 'lightning bolt charging screen' when I replug it into my computer's USB port. This makes me believe the soldered connection is working (at least for power). So, what am I doing wrong? Do I need a specific version of Odin? Special USB drivers?
Hi, if you solder the wires right, So the ODIN software will recognize your watch. When you are using only "Download mode" so you will need ODIN software. If you are using "Download wireless" you need to use ""Wifi Net Odin". So for each mode there are two type of ODIN. Hope this help.
@@anwarigroup I'll resolder wires again to see if that helps. I used the Wifi Net Odin for my original wifi download that bricked my S2. I have been using the regular Odin with the USB cable. I hope I can get this to connect. Also, any lead to the US version of the S2 firmware. I have a version but it is the one that bricked my S2. So, I would like to find a different source. Thanks.
Same firmware will be ok. Two wires are negative and positive and two data cable. 1- Check the wires by a multimeter. 2- install Samsung usb drivers
3- try with other computer
4- use ms window 10 or 7
@@anwarigroup After carefully resoldering my Windows 10 PC now recognizes the S2 as a USB device but I get a 'Unknown USB device (device descriptor request failed). This is listed under the Device Manager with the same text. Odin does not recognize the S2 at all. I went ahead and ordered a Galaxy Watch today as a replacement. I might try to use an entirely different cable and resolder one more time. And, using a different computer yielded the same result. I think this S2 is really bricked!
@@schultp can you send it to me for repairs.
Hello
I have a samsung watch SM R600 gear sport
Since a few days it does not work anymore.
I put it to charge, it heated up.
And now when I put it on the charger, the logo "samsung gear" lights up and then it goes out and impossible to light it.
Could you help me find the fault
Thank you
Desolate for my english I translate with google
Hi, Yes, First see if you can put your watch into download wireless mode. And see if it is staying in wireless download mode. If not so The Problem can be with the battery. And or Main board. So open your watch and change the battery and recheck.
Thank you
impossible to download in wifi
The watch is blocked when I put it on the charger the logo appears and disappears.
I test the battery it is 3.8v
I think it's good.
Thank you for helping me
Same Samsung SM-R600 wanna undestand how to pin the usb cable, could you help with it?
Nice job! Please Could you drop link or overview Samsung Gear Sport Pinout motherboard!?!?! Same problem download wireless is not working, can enter download by wire only! Help please!
Hi, i need the firmware for same issu in gear 2 can you please share me file.
Sorry little busy, refer to links
Hey mate could you please send me the firmware? I will give you my email as soon as you respond. My gear S2 battery started to only last 4 hours since 2 weeks ago, I tried resetting it and it was was stuck in reboot loop. Now just today it was stuck in a boot loop and it will not even start. It will stay on Samsung gear S2 loading screen untill battery dies.
Hi, I will send you the firmware, please use below link, post your request there.
electrovo.co.uk/unbrick-samsung-gear-s2-classic-reboot-loop-stack-in-reboot-cant-install/
@@anwarigroup okay
I just made the cable and purchased the firmware, I keep getting a partition error when I try the download. Am I doing something wrong?
Double check with your watch model. Look what exactly your watch model is and see you have the correct firmware first.
Checked it on the rear. SM-R732. S2 Classic
@@kilcranp so did it end up working for u?
@@parthpatel5532 it never programmed.
Hi I'm having issues. Can I get the download link??
Samsung Gear Fit2 pro stuck on Downloading screen can you help?
Hi, yes I can help.
@@anwarigroup please let me know how you can mansary@msn.com
@@mansary00 follow the video
Habib@electrovo.com
I am not this as inclined as you can I send my watch to you to fix?
Hey you can find the frimware for free
Thanks, I bought the firmware, seems easy and well explained so I hope to fix the watch. thanks.
Thanks Alan for your support. Please visit this link for more information:
electrovo.com/unbrick-samsung-gear-s2-classic-reboot-loop-stack-reboot-cant-install/
Did this fix ur issue?
I already have the wire soledered and I have odin 3.13 I download the firmwares from your web but when I press the start, I have a fail becuase Re-Partition operation failed, I tried in other computer and i have same issue. Do you have any idea to solve it?
I have to look on this,
do you have similar solution for gear s3 frontier ..my watch got bricked ..thanks n regards
Hi Check out this link
electrovo.co.uk/guide-to-connecting-a-samsung-gear-s2-and-s3-device-using-wi-fi/
@@anwarigroup this link is broken now
Can you send me the firmware for Samsung gear s2 classic please my phone is flashing a white light
Hello, Habib. I have problem with my gears S2 classic (sm-r732 A3LSMR732). (reboot loop) I don't have pay pal. Could you help ? where can I download firmware for my watch?
Drop email. Go to links
Hi Habib would you please picture me the Samsung galaxy active 2 PINOUTS diagram
Hello, I have seen alot of your videos. And I have a samsung gear s2, which has accidentally a wrong firmware installed to it. I was wondering if this method would help fix that?
Hi, Yes this method will work. If your wireless option works so use wireless option. otherwise use the Download wireless mode. but for this, you need to solder 4 wires.
@@anwarigroup ok. Yeah, my wireless download mode doesnt work, but for regular downlaod mode, I cant get it to download mode, watch is stuck on "downloading, do not turn off target" after the wrong firmware was installed. Do I have to do something special to get to the options screen and turn on download mode, or will it work from the screen :"downloading, do not turn off target"?
@@parthpatel5532 Put your watch into download mode. and follow the video.
@@anwarigroup also, my watch currently when put on charger just flashes white screen and when buttons pressed, opens up "downloading, do not turn off target". And my watch is not locked and doesnt need reactivation unlocking. So after I solder wires, do I just plug into computer, open Odin, and install the 3 files (csc, ap, bl) and not install combination file? Because in one of ur videos u first installed combination file and that turned on ur watch and then u put it in debugging mode , then u installed those 3 files. Do I need to do that? Or do I just install 3 files without going into debug mode, cuz my watch doesnt work and I cant access any menu to turn it on, becuz watch is stuck on : " downloading do not turn off target" (Note: the downloading do not turn off target screen doesnt have the little writing like urs does at the top)
@@anwarigroup but I cant, it doesnt move from the screen "downloading do not turn off target". This screen first came when the watch had the wrong firmware installed on it. And it's been there since. Doesnt change
Hi, I am Vietnamese. I have problem with Gears S2 Classic MR732 boot loop. I don't have pay pal. Can you help me? Thank you very much!
Hello, i have a problem witch my Samsung Gear S2 R720.
(my english not very good, sorry)
In my Gear S2 not working Wireless Download Mode, because when flashing the wrong file, wireless mode brick.
Working Only USB Download mode.
what to do, would you send me files to r720?
Please Answer.
(p.s: [translated by google] It started with a mistake through which you could not install ANY application from the store, when the flash mode stopped working wireless mode, and the problem has not disappeared)
Please contact me over email. at habib@electrovo.co.uk
Hi Bro,
while trying to change the country by chance I have flashed it with the wrong firmware and now it cant start or recover, it or power off but it vibrates and blinks with this message
Pleases help me bro
plzzzz...
Another point it happened after my S8 try to update to the lasted version... now the can't "forget" my phone and connect in another one...
sm-r730s combination available
Can you give me a link to download the files
I don't understand why I have seen so many other videos for the S2 but I don't see anything for the S3 frontier
There is one video for S3 in my channel. What is the problem and why you asking that question?
@@anwarigroup ua-cam.com/video/QCux0l8l8qY/v-deo.html
I try to fix it but i dont have a computer and the tools to do it, can we send you our watch?
Hi yes you can.
Contact me over my email for instructions. Habib@electrovo.co.uk
Yes, you can send me. contact me on habib@electrovo.co.uk
Hello dear,
I've active2, now it's stuck in ODIN mode and failed to go to download(wireless menu), i'm trying to connect it to odin using cable but the watch connector is 6 pins, any solution or suggestion?
Did you fix it I have same issue
@@ahmedwalied9649 I went to Samsung dealer, I didn't tell them any details, I said just not responding so they flashed with software for free
@@Youssif. I tried to make usb cable but I break the pins :-|
They take any money for that
@@Youssif. did you know also they used those 6 pins or not cuz I damaged it
@@ahmedwalied9649 they didn't charge anything
My pins where ok
Don't know exactly what will happen in your case
I assume you should go and don't go into details about what happen
If they are gonna charge you fee, they should inform you first so don't get panic
thanks for share dear Habib good work
i need the firmware for same issu in gear 2 can you please share me file.
hi sorry for late reply, do you still need help.,
electrovo.co.uk/unbrick-samsung-gear-s2-classic-reboot-loop-stack-in-reboot-cant-install/
I do not get the "Added!" in the Odin:
So far I know that when I plug the clock into the computer through the cables that I have soldered while the clock is discharged, it is activated by starting the rebooting loop as usual.
This tells me that at least I have welded the cables well that the electrical winding of the clock corresponds.
How can I know if the data cables are also well-welded?
How can I know if the drivers are my windows and are correct and work well?
@Mohammad Samadpouriejavid could be. It doesn't work for me
For fit 2 plz thx
If l send you my phone could you fix it for me please l am no good at computers
Yes I can do that for you. Follow the link to website and contact from there
please l have problem with my watch pls can you help you
Salamo alikoum my friend ineed firmware pleas can this delete samsung reactive account i have gear s2 sport
Hi, you can visit this link electrovo.co.uk/product/package-1-0/
Boss please help me
Invalid signature: PIT
Did u fix this problem? Does your watch work now?
Unfortunately not. Sat with it for 8 hours straight, nothing.
@@ckcgaming1134 thanks . What was ur issus btw? What was wrong with the watch?
It is a while ago now, don't remember any details, but I think it's just Samsung making better retail protection on their newer devices.
Hola te envíe la foto por correo
thanks!!!
Did this work for u? I have a samsung gear s2 which is stuck on download mode , do not turn off target because a wrong firmware was installed. Will it work to fix my issue?
can you help me unbrick gear s2? lost white connector . plz give me link u fb
how can i power up the galaxy s2 classic without using the power buttons because my power buttons flex was damaged