so it it possible to just change the wheels without changing the pulleys and also get a better top speed ? are they both compitable are the dimensions the same besides the teeth of the pulleys ? nice video btw
Thank you , For changing the wheels, the pulley is also necessary to change because the size will not be compatible with other wheels. Even the wheels are same dimensions. Like Voyager 110 mm wheels use 36T pulley with 255 mm belts; Hurricane 110 mm wheels use 40T pulley 280 mm belts
@@georgev7369 he’s wrong I ordered them and used the normal pulley and belt because they sent the wrong size for awhile and once they sent the normal size I barely noticed a difference
If you got the cyclones 110s on the box you also have two different belts to go along with the bigger pulleys that'l give you more force but less top speed. The bigger belts are for the bigger pulleys since the motor can't move that much but both wheels can be used with either belt/pulley configuration!
You may also take this video as a reference for replacing the 255 belts and 36T pulley for Voyager.
In this Video show with 73 A, i use the version 68 A is very soft ride on gravel surface i like it so much!!
hi what screw driver did u use to unbolt the circular screws sorry im new to all this
please
like what size allan wrench is all im asking
There's an L-Tool coming with the box, you may use that.
so it it possible to just change the wheels without changing the pulleys and also get a better top speed ? are they both compitable are the dimensions the same besides the teeth of the pulleys ? nice video btw
Thank you , For changing the wheels, the pulley is also necessary to change because the size will not be compatible with other wheels. Even the wheels are same dimensions. Like Voyager 110 mm wheels use 36T pulley with 255 mm belts; Hurricane 110 mm wheels use 40T pulley 280 mm belts
@@everythingabout-esk8 but they're both keggels I mean what will be the issue
@@georgev7369 he’s wrong I ordered them and used the normal pulley and belt because they sent the wrong size for awhile and once they sent the normal size I barely noticed a difference
What size belts are needed for the cyclone 110s? Different than what is on the board stock? Thanks
245mm belts are compatible with cyclone 110s
If you got the cyclones 110s on the box you also have two different belts to go along with the bigger pulleys that'l give you more force but less top speed. The bigger belts are for the bigger pulleys since the motor can't move that much but both wheels can be used with either belt/pulley configuration!
do the cyclone wheels take differenct belts and pulleys?
Yes, they do. And here's a reference you may take a look of
www.meepoboard.com/products/drive-belt?_pos=1&_psq=belt&_ss=e&_v=1.0
Will these wheels fit the MEEPO ENVY?
Yes, works with any kegel pulley
At around 1 minute 22 why do you loosen the screws around the wheel?
The reason of loosing the screws is to adjust the hub motor so that you may control the approximate place of belt
Thanks where do you get nose guards for the Voyager? 😁
@@sandorszabolcsi I’d like know as well lol
@@everythingabout-esk8 How tight should the belt be?
@@oneman-dan you can press it and it didn't sink. that means okay