How To Clean A Two Stroke Motorcycle Carburetor 🏍🛠
Вставка
- Опубліковано 24 лип 2024
- Check out our line of Enduro Helmet chin mounts for action cameras - shop.wannabes.life
Few things will make your dirt bike run worse than if you have a plugged up carburetor! Recently while out on a ride, I noticed that my bike was running poorly and had significantly less power than normal. At idle and low RPM's it seemed to run fine but through the mid range and high RPM's it would bog and act like it wasn't getting enough gas. These are the tell tale signs with any carbureted bike that one of your jets are plugged. Thankfully this job is easy and doesn't cost more than a can of carburetor cleaner to resolve. In this video we will show you how to take apart a two stroke carburetor and how to clean the jets and ports that air and fuel flows through. If you are experiencing poor performance with your bike, this is a great place to start and will likely have great results. - Навчання та стиль
Thanks man. My 77' RM370's carb has been untouched for 40 years. Used this video to help me out.
Always cool to get comments like this, glad we could help!
Great vid mate, cheers for the help 🇦🇺
this was incredibly helpful thanks
Glad it was useful!
My rm 250 lost most of its torque in 1st and 2nd, cant chug the hills in 2nd and 1st is a real issue too. Going to try this cleaning method, inspect reeds, dump fuel, and replace spark plug.. Im not exactly a fix'r upper but this video is giving me the confidence.
Go for it! You'll find your way as you move through a project like that.
Did you ened up finding a fix? I bought a 1990 kx125 and once you hit 3rd gear it has good power but 1st and 2nd gear is weak.
@@cloutdoors5674 yes, rebuilt power-valve with new spring, bought new silencer. I think that was the combination that worked, its back to normal. Bike had lost back pressure to build torque and was rapping out super quick in my opinion. Problem is definitely fixed.
This video is much appreciated! You are (at least) awesome.
Really great video! Any chance you could do a video of a step by step walking up to the bike and showing what to take off and what not to take off for us non-mechanically inclined newbies? Got my first KTM (1999 200mxc) and I'm learning from vids like these.
Thanks! Really appreciate the feedback. I was planning to do a video about jetting the carb at some point so I’ll definitely include the removal process in the next one.
⅝ è😊⁹
⅝ è😊⁹
thanks, it helped!
Glad to hear!
Thanx. My '73 Kawasaki 90cc G3 is running a little rough and I think I need a carb cleanup.
It’s a pretty safe bet!
Great video. How do you know what torque the jets and fasteners should be tightened too? Looks like you just tightened them by feel. I’ve striped that KTM magnesium alloy once.
I tighten them by hand. There’s probably torque specs if you’re worried about it. I find with these aluminum fine threads the torque is a lot less than you’d think.
Great video. How often would you say the carburetor should be cleaned? For a 2 stroke motorcycle engine being used daily
I’d only clean it if it’s having a problem. If it’s plugged up or has flat spots. The premix stabilizes the fuel so it shouldn’t gum up the carb on a two stroke. There’s no need to take it apart excessively.
Is there any other spray I can use instead of carb cleaner like wd40 I don’t know just using as an example?
Most cleaning solvents should work. Like I've used brake cleaner before. WD40 is a lubricant so its less likely to clean out the jets. Your really want something that will break down the oils and build up from the gas.
I ride Honda 4 stroke, picked up a yz85 and it bogs itself out in first n second, and sometimes if you’re not pinning it, really. Gonna try to clean the carb and check the reeds, hopefully that works😬 fresh fluids and spark plug already
Cleaning the carb is the best guess. Might be jetting, but I'd start with a clean.
@@ExtremeSportsWannaBes so I did, carb was already clean and I still cleaned it. Still just lacking power. Powerband feels like how the bike should feel outside of it, and outside the powerband just feels like it’s dying. Previous owner ran 40:1 I did 32:1 idk if that’s possible to do that much, and then I was wondering if a bad water pump would effect the power? Oil was a nice grey/silver when I changed it day after I got it😬
You usually can’t tell visually if a carb is plugged so that’s not too surprising. It could be a plugged jet but it’s hard to tell without being able to see it. How does the air filter look? It’s choked off somewhere and if it’s not fuel then it’s probably air. The air filter would have to be pretty dirty but I’d definitely check the reeds. Also potentially a plugged up exhaust system could reduce the power if it can’t expel the exhaust. You might also look at the petcock or if you have an inline fuel filter that might be plugged.
@@ExtremeSportsWannaBes put a new petcock on, filter is on there. Not sure about exhaust, I pulled the reeds when I cleaned the carb and the flaps seemed fine, the outside part that connects to the carb (not sure what it’s called) but that rubber gasket side is a little dry rotted but can’t see that doing this. Air filter is dirty I’d say but doesn’t seem like awful, I’m gonna try a new one and 40:1 gas today after work
@@ExtremeSportsWannaBes is it possible that the jetting was particular for warm weather? I am trying to run it in 30-40 degrees but the bike gets warmed up, history of the bike was it used to be a race bike and then just a kids bike for trails, then me. So maybe not really ran in the cold?🤷♂️
I found a 2003 kx250f for sale mint condition only thing it needs done is to fix a clogged carb it’s being sold online for $1400 idk if I should buy it or not
No idea, would need to see it to have any kind of useful opinion.
Running with choke on but bike is dien after I enegae first gear and let out clutch 97 cr250
Once the bike is warm, you can't run it with the choke anymore. Idle speed needs to be set with the choke off while the bike is fully warmed up.
Works also a toothbrush
*You're welcome "Tony Romo". I didn't know that other than your football 🏈 talent you can also fix 🔧 🔧 fix things/bikes.* 😂
They should I run an inline fuel filter on my 2 stroke
It might help keep stuff out of the carb. I’ve done it both ways and to be honest I have yet to plug up a carb without running a filter. Not sure how big of a difference they make.
@@ExtremeSportsWannaBes thanks man, I bought a 01 ktm 200 mxc and I don't know anything about 2 strokes... thought I'd fix it up you know?
👍