Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉
I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?
@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL He even didn't show how he took that from the ground. Actually I don't believe he was able to lift that up
He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure
First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end
As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.
Could I give an advice? Please improve your security methods of work... don't cut any material with you foot so near! Or use safety shoes... It's so dangerous... and I mechanic... it means I know a little about it! Well done... beautiful and exact shape!
No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on UA-cam.
Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?
Good video because I finally learned how to make the circular shaping mechanism
‼️❤️VERY NICE ❤️‼️
very nice, would have like to seen it sitting up-right!
Great template teaching . Thank you so much for your video.
Ahah! Now I know how to make bowl jig. Thanks.
Hola! ✌🏽Saludos desde Mexico 🇲🇽🔥💎
That's an easy way of making a tool thanks a lot . I was looking for a video on how to make one...that makes pot making so much easier ..
Sir..really nice. May I request u to give ur mob. No so that I can talk to u in details.
Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉
Where is the final result ??
ua-cam.com/video/HLkiZ22TLGM/v-deo.html
The final result : the pot died 🤣😂
Excellent creativity, I love the simple design and form of the tool used to make such a beautiful pot.
Muy bueno el video, gracias por compartir con nosotros su conocimiento.. Saludos desde Paraguay
Sou do Brasil. Brigado sua ideia é muito boa
very nice and is simple to do it thanks alot
I only have two toes left, however I still have all of my fingers except three.
me encanta la tecnica . excelente
waiting for part 2 ....
Muito bom👏👏👏👏
Very good and easy to follow video, thank you
Excellent!
Essa montagem deu nó na minha cabeça, mais tenho q aprender,ficou lindo
very nice,thank's
14 minutes of video and you cut it right im the end... what the hell...
Ficou top 👏👏👏👏
Que material é esse do gabarito?
aluminum composite material
Incrível !!!
Parabéns !!!
A beautiful thing
You make it look so easy
Топ! то самое видео
秀樹感激Goodです=3
Queria como fazer a ferramenta para fazer o vaso
Great vid
Where''s the fing pot?
I will buy rather thanks 😁
We watched and didn’t get to see the finished pot. Really really disappointing.
I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?
great.
Did you use sand or dirt for your mold. Does it make a difference what you use for the mold
Use damp sand , so it can stick to itself and hold its forum !
Indah sekali
Amazing
Are you serious? What is amazing???
@@ninadelisboa That they had the audacity to post it?
@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL
He even didn't show how he took that from the ground.
Actually I don't believe he was able to lift that up
He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure
Drying
Can you send me a measurement of the temple u built
Didn't show the finished product
Final result: It broke when he tooks it off the ground
🤣👌🏻
I would have paid money to see that.
That would have justified wasting our time.
First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end
Bom dia por favor diga me a medida desse gabarito
As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.
Cadê o final do negócio??
No final, quebrou quando ele tentou tirar do chão...kkkkkkkk
how many mm is the aluminium composite sheet?
Mixing that much water into the cement will weaken it too much- it won't last- great effort though!
Although it never showed the end product, it should have ended much sooner.
Гениально босую ногу использует
Что за материал Вы в начале ролика отрезали?
this is the most intense making of a concrete planter on YT.
show the final pot but or it was not well
Could I give an advice?
Please improve your security methods of work... don't cut any material with you foot so near!
Or use safety shoes...
It's so dangerous... and I mechanic... it means I know a little about it!
Well done... beautiful and exact shape!
Can't see the inside of the pot.
Where info on supplies or anything?
😀👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙏🏻🥰🇧🇷
Can you please give me the measurements ?
Is that mud or sand
Probably a million videos in here showing faster ways to make a nicer bowl.
Wow. An accident waiting to happen
What type of sand
sharp builders sand, as it holds together better.
Meh.
Чем все закончилось ?(
Они поженились и жили долго и счастливо.
Sharp Knife + Toes = No Toes
Verry long time
But what was it?
supposed to be a pot, it probably fell apart when he picked it up because it was a stupid idea.
रामसजन राजभर
Me fumé todo el video y no muestran como queda?!!!
😂
First things you use need to put on screen what size all the tools and name
Waste of time. Tysm🙏🏻
That is a very careless way to cut. It’s an accident waiting to happen
Kém
Que
You did no finish
watch them toes
Comparison of sand and cement please?
What was that? Pure waste of time. Where is end product? Why do you make such videos ?
No sirvió!
No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on UA-cam.
⁹город жоб
still inexperienced - too inexperienced.
Come here, i want to teach you how to make it very simple that you .. 😂
บ😮คึ_🎉จ
watch those toe's.......
Very bad way to end.
Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?
Ну и дерьмище..
What tha fuck!!!!! Watching the whole entire video and there is not result??? This video should be taking out of UA-cam