A handle you find perfect someone else may find too big. Not everyone's hands are the same size, there's a reason old tools often have all sorts of sized handles, they were made for who was using it
I agree with you on the aesthetics, it doesn’t look nice or cool but like the fellow above me said, different sized hands and if the thing is gonna be used it should be comfortable. Even yourself, depending on what you’re doing with it you might find different sizes for carving wood than for cutting it steak. However, there’s no getting around the fact that the handle is borderline ugly. I make many of my own tools. If I have a task and want something specific that can’t be found such as a fancy shaped wedge with blades or fins that split a piece of firewood into 8 pieces using a sledgehammer and a single blow.
,Now I post English comment about how much it reminds me of the first knife I received from Stefanos when he became blacksmith. He gave to me in my 16 birthday. Yasos, brothers.;
Самый лучший нож!Без понтов и сталюга отличная и рукоятка из бука,а главное самодел,в магазине такого не купишь сто процентов качество не то из магазина.👍💪
Помню по молодости тож хотел нож из ШХи замутить но старые роботяги пальцем у виска покрутили. А вот наконечники для гарпуна супер при условии что в термичке есть грамотный чел.
Сделал себе нож охотничий из ШХ15, закадил в масле, отпустил. Твёрдость HV 54-55ед. Сделал химическое оксидирование. Ничего не ржавеет. Очень бриткий и крепкий нож. В лесу только им и пользуюсь. Делал из 9хс, 9хв,р6м5, 40хвг, из ШХ в итоге 4 штуки сделал, всем нравятся)
Как сейчас помею. Трудовик однажды нам рассказывал о том, что он в молодости (думаю это годы 60-70-80 были) с друзьями собирал подшипники. Они собирали подшипники на свалках (вроде бы), а затем переплавляли их и получались отличные ножи.
Идиот... Из хорошего, не работавшего, подшипника сделал (перевод на вежливый) плохой нож... А сколько оборудования для этого понадобилось... Можно было бы продать и купить готовый, хоть из дамасской стали, хоть золотой...
@@user-iv6nt5di7n Да с такими руками и клинок нах не нужен. Подшипник колет лёгким движением руки, черенок одним движением отрезал, аки ножовочкой пилил. Я бы не удивился, если бы он ковал не молотком а тоже рукой, и точил трёхдневной щетиной.
I've made a few knives like this and I think you've done a brilliant job on this knife - it looks great, and seems to be sharp enough from what I saw... Also, nice camera work! 👍
That's what I'm talking about brother!!!! Simple but custom and badass knives. I'm in a long term treatment facility . Man when I get out of here I wanna do exactly what your doing
I am Iranian ; thank for you ! I can not rapeaking inglish !!! منایرانیهستموانگلیسیبسیارکم،یا،اندکیمیدانم !!! اماکارشما،رابسیار؛بسیارمیپسندمودوستدارم !!! امیدوارمهمیشهشادو پرانرژی باشید !!!
Ну, ничего, нормально... Высокохромистая подшипниковая сталь вполне может обеспечить весьма высокую микротвёрдость... Подобающая термическая обработка, правильный выбор абразива - и можно побриться..!
Хороший совет тебе, если делаешь ножи, закалвай их в самом плохом хозяйственном мыле. 2. Не Сади ножи на эпокситку. Эпоксидкой не проливай дерево никогда.
@Odd BoroFiend boring, chunky and only glued in place.... Nice finish to the wood but for the work done was disappointing to see the end result be so basic
@@jay36963 and the basic works. This isn't a combat knife, or a knife dedicated to any sort of heavy-duty work labor. Also most actual knife makers will tell you that a quality epoxy, mixed well, and used properly, we'll make the blade pretty much impossible to remove from the handle without destroying the handle material. It's boring to some, basic to others, but shines in it's overall simplicity, the ability of someone with less knowledge and skill to reproduce themselves, and the basic function and beauty. There wasn't really a whole lot of work as far as knife making goes if we're being quite honest. Straightforward afternoon blade project. Handle is also likely a nice hard wood, so looks good and functions properly for many years to come. Don't be hatin... ;)
@Odd BoroFiend didn't say hate... so GFYS... it was an opinion... he took a lot of time making the blade even if it is basic, the handle is just a handle cut down a vanished... epoxy is good but long term not ideal, if the handle cracks and needs replacing it'd be easier done with a pin or screw design... in my opinion, it's boring and I was disappointed with it same as your mother is with you. Have a nice day
I don't know if bearing collar metal is super hard steel, or is just this right size to shape said blade. Clever egg simile. At 1st thought this dude is sure organized, 'a place for everything...and everything in its place'...then realized I am an idiot. Nicely done!
Ah, a sword. If you don't understand why this is funny, allow me to explain. The thing that used to sometimes differentiate swords and knifes in europe was the way that the handle was made. Knifes were two plates put on either side of the tang and riveted into place, and swords had their tang stuck into a piece of wood like seen in the video.
Ручка конечно убого вышла... Тяп-ляп на эпоксидку,больстер отсутствует, торец не обработан. В общем на скорую руку. Типа срочно нужен рабочий нож без излишеств и подешевле.
Using tools to create a knife to use as a tool to create tools.
It's the circle of life.
You mean the circle of Knife
😢😮
Mufasa, is that you?
What a tool indeed
I came here to see this comment
Ah yes, a fresh bearing straight from the farm.
It's from my freerange mechanostriders :D
🤣🤣
Lol classic
First person I've encountered who eats bearings for breakfast too. Apparently they are rich in minerals like iron.
😊
I honestly didn't even care if the knife turned out good. The egg canton and cracking the bearing was enough for me. Thumbs up.
Боиться ударов
Думал новое увижу: яичницу из шх15. Уже и рот раскрыл-взбей
😅😊😊😅😊😊😅😅😅😅😅😅
@@user-qp1yn3zq6nОт закалки зависит можно хороший сталь закалить так что она может не крошится а просто лопнуть или даже просто согнуться
Чувство юмора такое же искромётное, как и мастерство...😂
Однозначно подписка и добрая сотня 👍.
إختراع فاشل بإمتياز .كل هذا العمل والمعدات والسكاكين موجودة بالمتجر انظف وانشط .
Well done, let me too get a fresh bearing from the fridge..
Haha😂
😅
I suppose not bad .. if prison shank was the look you were going for
😅🤣🤣
If your not keeping em in the fridge then where you putting em 🤨❗️❓❗️❓
On the second time around, I appreciated the egg carton even more. Fantastic editing also. Great work!
Especially the parts that look like commercial knives suddenly.
@@Kinannyou think it’s a commercial knife or are you saying it’s similar fit and finish?
@@chrisjosekuehl In one frame it goes from crude metal thing with a knife shape to a perfectly finished blade with perfectly machined edges.
My man can freehand a bevel like its nobody's business, damn!
Это очень просто. После третьего , четвёртого ножа.
It's almost like he's practiced or something
Let the guy be complimented all you detractors dang! 😂
@@user-kt2wu9si1t Bull shit hahaha I’m still struggling but I guess it also doesn’t help that I’m using a harbor freight belt grinder 😂
This is why you always check your eggs before buying.
it happens.. found a hatched knife in my carton one time
Трещина
В Челябинске из ножей подшипники делают.
в Череповце тоже)
А в Хабаре из иголок наковальни! 😂
Ржавеют же
@@Maiha-25 ты с хабара что ли ?)
Суровые мужики))
За яичницу из подшипников лайк не глядя))
Да прям 🤣👍
И черенок буковый
@@user-em3wj9js6x За в ноль убитые штаны
А че, не у каждого в холодильнике?
Рукастый поваренок
The fact that this looks so simple just shows his mastery at his art
This is amazing
thank you :) It's not too complicated, it just requires a bit of practice :)
Ручка из бука. Мастер знает толк в дереве!
Shsh to you and I fdydhdydbx hey hdhdh ❤❤❤❤❤❤❤😂❤😂😂😂 namaste 😮😮😮😮😮😮😮😮 djfgyi fhsuhfu ururjx to you and son gscfe tagjnk namaste 🙏 😀 ❤️ I miss ❤️
It's the cracking the bearing like an egg, that won me over..
L😊
China. .
@@YiahuPandaybq😊😊
Твёрдый,но хрупкий. Алмаз тоже легко разбивается молотком.
@@YiahuPandayq
Fanciest prison shiv ever!
that was what i was thinking.
Exactly my first thought 😆
You're a doomauss...😂
Man I thought your comment said fascist when I first read it. I was like huh. 🤷♂️ On to the next
@@Thedude... bot
Когда у человека руки правильно работают, то это прекрасно!!! С уважением из МОСКВЫ - ИЛЬЯ
So nice to see you putting a mechanical connection between the blade and handle instead of just using epoxy. Well done.
Can’t believe that only took him 30 minutes start to finish! Nice!
@@bobs8005 He doesn't know what he means.
Cracking the bearing like an egg was the most satisfying thing I've ever seen
Ikr😂
Подшипник который полежал в лотке для яиц, становится хрупкип и раскалывается легко как скорлупа.
IF it was a real action it only shows the bearing is crap
@@sindbad8411 🤔🤔🤔
Nie peka na polowe
I love the knife but I think the handle is a bit bigger than it should be but great work from a fellow blacksmith
Hope these are free range.
A handle you find perfect someone else may find too big. Not everyone's hands are the same size, there's a reason old tools often have all sorts of sized handles, they were made for who was using it
I agree with you on the aesthetics, it doesn’t look nice or cool but like the fellow above me said, different sized hands and if the thing is gonna be used it should be comfortable.
Even yourself, depending on what you’re doing with it you might find different sizes for carving wood than for cutting it steak.
However, there’s no getting around the fact that the handle is borderline ugly.
I make many of my own tools. If I have a task and want something specific that can’t be found such as a fancy shaped wedge with blades or fins that split a piece of firewood into 8 pieces using a sledgehammer and a single blow.
It’s a common whittling handle style
You listened to my suggestion :) Sick knife man. I'm glad you used the ball bearing, that's seriously hard steel.
Σ' έπιασα! Φανταστικό μαχαίρι φίλε μου, εξαιρετική δουλειά.
Μπήκα στα σχόλια μόνο για να δω άμα το είδε άλλος Έλληνας 😂
@@iasonasgkotsis7594χαχαχ κ εγω
Εξαιρετικά παρθένο παντού ελλαδα
Για λέγε ρε φίλε που θα σε βρω
,Now I post English comment about how much it reminds me of the first knife I received from Stefanos when he became blacksmith.
He gave to me in my 16 birthday.
Yasos, brothers.;
Отличная работа! Хорошо, когда руки из нужного места растут....
If I had this knowledge I would definitely be a millionaire today just from making knives
You are a craftsman indeed! You possess many abilities to built a knife like that!
He ran the video backwards. He was actually making bearings. And a handle-y thing.
Ein besonders guter Handwerker, wenn er den Stiel falschrum in der Kreuzhacke hat!😂
Bro that’s literally the worst knife I’ve seen someone make. Definitely falling apart in a week or two
Yes world class indead
Самый лучший нож!Без понтов и сталюга отличная и рукоятка из бука,а главное самодел,в магазине такого не купишь сто процентов качество не то из магазина.👍💪
спасибо за хороший комментарий. Нож сослужит мне хорошую службу в моей мастерской :)
После закалки в масле, он становится как стекло, хрупкий. Нужен другой способ.
@@user-sv1ww9uh2t это смотря на сколько отпустить в масло,проверьте на практике ,время нахождения в масле сильно меняет результат.
Помню по молодости тож хотел нож из ШХи замутить но старые роботяги пальцем у виска покрутили. А вот наконечники для гарпуна супер при условии что в термичке есть грамотный чел.
Сделал себе нож охотничий из ШХ15, закадил в масле, отпустил. Твёрдость HV 54-55ед. Сделал химическое оксидирование. Ничего не ржавеет. Очень бриткий и крепкий нож. В лесу только им и пользуюсь. Делал из 9хс, 9хв,р6м5, 40хвг, из ШХ в итоге 4 штуки сделал, всем нравятся)
Как сейчас помею.
Трудовик однажды нам рассказывал о том, что он в молодости (думаю это годы 60-70-80 были) с друзьями собирал подшипники. Они собирали подшипники на свалках (вроде бы), а затем переплавляли их и получались отличные ножи.
Cracking the bearing was my favourite
у меня после закалки хрупкий подшипник получается, надо еще часик в духовке отпуск делать
Греешь хоть чем, до желтого цвета, примерно 2 минуты. Получается что надо :). (Это из металловедения).
Надо в масло окунать , после прокаливания.
@@user-es4dz1rd9e до желтого цвета побежалости?
@@user-pc2yg4qh9t что такое "прокаливание"?
@@user-ov8op6zv2b пошёл в баню
As both a wood work enjoyer and a Mordhau fan, i consider this absolutely amazing.
Smart use of a pilot bearing. Nice little pukko.
That is the perfect bushraft knife right there, all perfect in my opinion
Nothing more fulfilling than watching a Craftsman do their thing
Isp😊 to ar Zee
L PA ta😊5 hi
@@ferdoshsk0p00000
0000000000 pl 00000
99999999999999999😊00
Love the Scandinavian Angle on the blade … Best carving angle I have ever worked with … Good quality Carving knives are not always expensive either …
Great job!
Interesting video!
Thank you, for sharing.
Brilliant ginus amezing talented professionals dengerus skills ❤❤❤❤❤❤❤
Браво тем, кто не сидит на яйцах а что-то делает!
Из обоймы подшипников получаются классные клинки!👍👋🤝
Идиот... Из хорошего, не работавшего, подшипника сделал (перевод на вежливый) плохой нож... А сколько оборудования для этого понадобилось... Можно было бы продать и купить готовый, хоть из дамасской стали, хоть золотой...
@@user-iv6nt5di7n ,,😊😮😢😢😮❤❤😂🎉😢😮😅😊
@@user-iv6nt5di7n Да с такими руками и клинок нах не нужен. Подшипник колет лёгким движением руки, черенок одним движением отрезал, аки ножовочкой пилил. Я бы не удивился, если бы он ковал не молотком а тоже рукой, и точил трёхдневной щетиной.
@@andrewpetrovich6899 а закаливал своим дыханием
@@konstantinnoskov6480 перегаром
His torned clothe shows how much time he gives to his work ❤
За яичницу из кит.подшипников- породистый лайкос!
Absolutely astonishing! You make it look like a breeze....
It's really incredible how much material is actually in some things. I saw a guy make a whole sword out of half a link from a 1" chain.
Jajajajajaja
I try to be careful as much as I can :)
Wah Bhai wah kya baat hai nice jisko pasand hai like kare 💗💗🌹👍💗🌹👍💗🌹👍💗🌹👍💗🌹👍💗🌹👍💗
This the kinda guy I'd want on my side in an apocalypse
A serial killer?
I am cracking up I had both of these thoughts, 😂😂😂😂
@@cam5816 of course
Não!!! Esse não é o kinda!! é o Cuteleiro Biil!! Cara é Fera!!!
😂😂😂😂
That was incredibly satisfying to watch.
I love how he just cracks the damn thing like an egg 😂
Ah I have seen part 2 where you give it a beautiful leather holster, very cool
Nice seeing a recipe being shared, like the editing 😂
then I should think of new recipes ;d
Great use of recycling materials. Nothing is wasted.
I've made a few knives like this and I think you've done a brilliant job on this knife - it looks great, and seems to be sharp enough from what I saw...
Also, nice camera work! 👍
из автомобильного клапона круче
He made that beautiful piece in less than a minute!😮
МОЛОДЕЦ СУПЕР КЛАССНЫЙ СПЕЦИАЛИСТ КЛАСС ПРЕВОСХОДНО РЕСПЕКТ НА ВСЕ 100%!!!😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
That's what I'm talking about brother!!!! Simple but custom and badass knives. I'm in a long term treatment facility . Man when I get out of here I wanna do exactly what your doing
Good luck with your rehab mate. Making things with your hands is very rewarding . Even simple things :)
I am Iranian ; thank for you ! I can not rapeaking inglish !!! منایرانیهستموانگلیسیبسیارکم،یا،اندکیمیدانم !!! اماکارشما،رابسیار؛بسیارمیپسندمودوستدارم !!! امیدوارمهمیشهشادو پرانرژی باشید !!!
@@shahrokh110 Thank you friend , I wish you good health and happines :)
@@RustLegion q0P1PPPPPPPPPPPPPPPPPPPPPPPP1
Нож крутой. Лайк. Но недоделан... Нужна гарда хорошая наборная ручка... Можно люминий или бронзу а лучше клепки
Ну, ничего, нормально...
Высокохромистая подшипниковая сталь вполне может обеспечить весьма высокую микротвёрдость...
Подобающая термическая обработка, правильный выбор абразива - и можно побриться..!
Сергей мои мысли выразил... Поддерживаю
Режущие свойства хорошие, но на изгиб хрупкий.
ШХ15 сталь твердая, но хрупкая. Для ножа лучше 40Х15
Ты философ...
@@user-wr6zy5dj7g совершенно правы
Дед делал с подшибников ножи, до сих пор на даче
Lol at first I thought it was an egg😂😂
Extra virgin olive oil. That makes sense. Great job!!!
Можно подумать сейчас хорошие подшипники делают,что можно ножи с них перековать 😁
Эт точно (
Xarasho davaye😊
сейчас один подшипник стоит как 10 новых ножей!!!😂
ШХ 12 и раньше ни как не для ножа🤓
@@eduardt7191 , надо бэушные брать забесплатно.
Relax bro no-one saw the black rope😂😂😂
Great editing! It looks like a great knife.
Simple plain and all the more gorgeous of a blade
С чего взяли, что великолепный? Им только хлебушек резать, а, что посерьёзнее лопнит или будет крошится
@@user-oo5qd6ns8c don’t be so negative. He didn’t say it was great. He said it was simple, plain, and gorgeous. Pathetic.
Another great video! Really liked the eggs box :)
Bet ya like hearing/seeing key’s jingle too, don’t ya, sport
Jajajajajaja
Nikola Y eso que no viste la caja dé chorizo sí no té enamoras!?
Wonderful skills. Beautiful knife.
thank you :)
bro really just went "bearing? no its a knife"
Whenever I get to your skill level I will never leave the workshop
Πολύ ωραία δουλειά αδερφέ. Μικρό και εύχρηστο μαχαίρι
Δεν φταίω εγώ, σε πρόδωσε το "Χρυσαφένιο" 😉
@Геннадий Дмитриев á¹
Excellent work sir 👍
Lovely looking blade. Handle looks a bit chunky for my liking, but that's just preference. 😊
If you ever go to the penitentiary, you’re gonna be just fine.
Eu.achei.que.ele.hia.fritar.hos.ovos.mais.no.fim.so.metal.ta.valendo.
Главное найти подшипник😂
А если не попадет в тюрьму?😅
@@ilgarmammadov1911 Оно уже опущенное..!😂😂😂
What I thought almost immediately when the shape of the handle was revealed. It looks so much like a shiv but just with a better pointy end 😅
Yeah that bearing race steel is some pretty good steel. That knife will hold and edge alright as long as you temper it correctly.
Ich hoffe, bald sind die Griffe genauso hübsch wie die Klinge🔥
That's beautiful man great work i'm a Knife enthusiast and I love it
Хороший совет тебе, если делаешь ножи, закалвай их в самом плохом хозяйственном мыле. 2. Не Сади ножи на эпокситку. Эпоксидкой не проливай дерево никогда.
А что с эпоксидкой, можете разъяснить, пожалуйста!
uwaow amazing SKL Lo guys pokoknya mntp deh bro ok 👍🏿
Sir;
You are in a arthis, God Bless you.
Respectfully;
Andy
thank you Andy , best wishes to you :)
Браво, майсторе 👏👍
Поздрав от България!
You are the best❤
A true black smith knows how to crack a bearing without splitting the cage 👌 bone apple tea
Wow, that is a very sharp knife.
U just make everything look so easy:)
yes speeding up things to fit in 1 minute clip make them look fast and easy :)
A bearing housing will be some hard friggin steel. Good choice
He broke bearing like a egg🤣
REALLY?? OMG YOU ARE SO SMART, YOU UNDERSTAND A JOKE WOW
@@Matthew_Removeafterwashing but you took too much time to react 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Great video, great blade but I cried seeing the handle 😢
Very nice handle...strongly resembles simple Swedish/Finish blades.
@Odd BoroFiend boring, chunky and only glued in place.... Nice finish to the wood but for the work done was disappointing to see the end result be so basic
@@jay36963 and the basic works. This isn't a combat knife, or a knife dedicated to any sort of heavy-duty work labor. Also most actual knife makers will tell you that a quality epoxy, mixed well, and used properly, we'll make the blade pretty much impossible to remove from the handle without destroying the handle material.
It's boring to some, basic to others, but shines in it's overall simplicity, the ability of someone with less knowledge and skill to reproduce themselves, and the basic function and beauty.
There wasn't really a whole lot of work as far as knife making goes if we're being quite honest. Straightforward afternoon blade project.
Handle is also likely a nice hard wood, so looks good and functions properly for many years to come. Don't be hatin... ;)
@Odd BoroFiend didn't say hate... so GFYS... it was an opinion... he took a lot of time making the blade even if it is basic, the handle is just a handle cut down a vanished... epoxy is good but long term not ideal, if the handle cracks and needs replacing it'd be easier done with a pin or screw design... in my opinion, it's boring and I was disappointed with it same as your mother is with you. Have a nice day
I don't know if bearing collar metal is super hard steel, or is just this right size to shape said blade. Clever egg simile. At 1st thought this dude is sure organized, 'a place for everything...and everything in its place'...then realized I am an idiot. Nicely done!
Mantab bang.. Aq dh mncoba bikin. Hasilnya 👍👍👍👍nyis
В молодости в 1974 г пробовал, очень хрупкий
После закалки отпуск нужен и будет счастье👍
В 75-м поступил на физтех, много чего изучил, да ножик мне стал уже не интересен
Bro i love blacksmiths/leatherworkers there amazing i wanna be one and there like straight up metal benders
And also awesome job on the handle
Simple for me is a bowl of cereal. Your simple is next level.
Dawg cracked it like an egg 🥚 😂
Hardened steel, not hard to crack. As the knife won't be.
Это самое лучшее,что я видел 👍✊👊✌️
Muchas ideas para la gente del campo siempre bien buenas felicidades igual para ell@s también.
اللهم صلي على محمد وال محمد
عمل رائع وممتاز
Ah, a sword.
If you don't understand why this is funny, allow me to explain.
The thing that used to sometimes differentiate swords and knifes in europe was the way that the handle was made. Knifes were two plates put on either side of the tang and riveted into place, and swords had their tang stuck into a piece of wood like seen in the video.
Bullshit. Many historical knifes have a tang like this one.
@@kallewirsch4187 sometimes does not mean always. Also, the messer was literally a big knife and it was to get around the sword laws.
Well... Than swords and knives should be done with the same technique, that is: fixed up to the handle with rivets.
I wish I had skills like this! 😎
Сталь, я думаю будет очень твердая, потому и хрупкая, но зато заточку будет держать, главное на излом, не работать. Но снято красиво.🎉
Smart work you do!
Show belo trabalho artesanal 👏🏼👏🏼👏🏼parabéns ✌🏼🇧🇷
Всё гениальное просто. 👍👍👍
Very nice Knife free of charge
Εξαιρετικό μαχαίρι όπως και το ελαιόλαδο
Ручка конечно убого вышла... Тяп-ляп на эпоксидку,больстер отсутствует, торец не обработан. В общем на скорую руку. Типа срочно нужен рабочий нож без излишеств и подешевле.
все правильно говоришь, НО - зато форма очень удобная! месяц назад сам похожей формы ручку сделал и проверил!
Так это якут. У них такие формы.