The message that pops up with my alarm in the morning says "BE KIND" . It is the very first thing I see when I wake up. Even though I continue to have my struggles, I believe that every time I wake up and see that message and start my day with that mentality I am improving my life and hopefully the lives of everyone around me. Buckin,you are the main reason for me to have decided to change my outlook and actions. I started watching your videos to learn about tree work but I didnt know it would influence me to finally want to change entire life and become the best person I can. Thank you so much
14:25 I love my m tronic saw, never have to worry about it’s setting. Just start it and go. I like the snap the electronic carbs have, the throttle response is so nice.
I have the MS462-CM with a 32” bar. Full house, hand filed, it’ll cut through a 32” solid red oak trunk in a heartbeat. I use the MS201-CM for small trees and limbing. Love the electronic stuff.
This is all Greek to me, I have not used a chain saw in my life. I think that at my age, I don't need another hobby and or trade. The video was a great informative lesson, thanks to Billy, again, you have made me a believer that you are at the top of your trade. The two Axe's are beautiful, they seem to do the splitting job great. Either would be an asset in gathering firewood. However; here in SE Louisiana, I don't use more than one cord of firewood during our mild winters, our fireplaces are used for enjoyment, not heating. Jona did a beautiful forging job on the Axe bit/head, it will make a fine Axe in end.
What’s up bud. Keep workin. Keep your nose to the grind stone. Be YOU. Don’t try to fit in. Do what’s right and be kind and you’ll grow to be better each day that passes. Stay positive and follow your spirit.
Enjoyed cutting trees Yesterday. "Sunday" Was fun cutting the many methods for each tree. And especially those super leaners . Had a fun time getting that 1 leaner , to fall opposite of where it was sitting. Thanks a bunch
Oh friends, I needed this video today. Just a horrible day at work. Got passed over for a promotion for a relative of the boss. I'm finding it really hard to stay positive today, friends. But this helped a little. Hope you all are having a better day than I am. Cheers friends.
Billy if you haven’t done it yet, DO IT. I just picked one of these up today because I needed, well really wanted something with more power. I ran a gallon of the husqvarna fuel through it just cutting logs seating the rings at 1/4 1/2 throttle. After I finished breaking it in I let her eat and holy cow man, I’m selling my 461 so I can get this saw worked. It’s an animal brother. The best part is it starts so easily. 3 pulls even brand new. After its run for a bit it’s 1 pull no choke even after sitting for 40 minutes. Husqvarna really did something with these 572’s man. I’m gonna have to see if I can’t take some videos myself. This saw gets me excited. Something I haven’t felt working a saw in a hot minute. I WANT to pick this thing up. It’s dark out and I still wanna go cut 😂
Every human. Keep working. Keep DOING. Keep your nose to the grind stone. Be YOU. Don’t try to fit in. Do what’s right and be kind and you’ll grow to be better each day that passes. Stay positive and follow your spirit. BEST WISHES TO LANDFILL!
Hi to all. Im giving my 372 a blast tomorrow. Cant wait to hear the old girl fire up.Shes been sitting a while. 3rd pull and shes a goer! Take care everyone.
I have run a 572 xo an man that's the best saw in the world you just need to be used of it but man that saw is strong and ergonomic man I recommended everybody that search a new professional saw.
Now I know what to replace my 372xp with when it dies 15 years old now but still strong but it is me that is not so strong now and the balance of the 572xp looks inviting to my lower back so perhaps before it dies?
I'm a new subscriber! I just found your channel. Man...I love it! My first job was splitting wood when I was 15. Then I worked at a sawmill for 20 years. I would of still been there if they hadn't closed down. I worked my way up from stacking lumber to a Sawyer. And everything else in between. I would saw the logs into lumber. And even helped work on the band saws. They were 47 1/2 feet long, 12 inches wide and had 282 teeth. Miss that kind of work! It was hard! But...man I was strong as a bull. What is left of me is still strong! But...I'm 52 now. I did alot of stupid things thinking I was superman! lol. I'm on disability now because of it. But...man, I would give anything to do it all over again. I'm so glad I found your channel. This Bama man thanks you! For all that you do. 😊😊👍👍👊👊💪💪
I’ve built one in a little “hotter” state of tune than what you see in this video ... sweet saw with lotsa potential and great mileage to boot - and this is comin from a STIHL guy 😂 ... My 462c cuts a fuzz quicker but the 572xp definitely has it beat from a start / stop tickle the wood scenario ...
Oh yeah Buckin I love the handle bar design. My 570 XTorq has the same style handle. Mine is a bit big for my smaller hands but I love it. That axe is just PLUMB TAZZIELICIOUS BROTGER WOW. Thank you Donny Walker. Thoughts and prayers for Landfill and Becky Davis. Love you all. 🌲❤🌲✊
Wonderful video, Buckin’. Really enjoyed seeing the 572, and especially enjoyed the prototype of the new axe. Stay healthy and happy, my friend. Be kind folks! Have a truly great day. 🪓☀️✊🏼🧡
Mmm Mmm Mr. Walker Sure Knows His Business, She Sure Cuts Eh ? Love Them Steel Splitters ! Prayers For Land-Fill & Family & Hugs & Prayers For Bo Bo & Family ! Be Well All ! ATB T God Bless
Another great video BBR! Fantastic saw from Donny Walker!! I can see you testing the kahonas off of it haha. Love those two axes very nice and the very last one....the prototype...just wonderful. Take care and be safe, love and kindness to one and all. Graham🇬🇧🇬🇧🌲🌲🌲🌲
Not putting the saw down, had a guy that worked for me that had one and he loved it. The saw really seemed to cut, but with my experience Husqvarna saws seem to flat bog to a stop with no chance to recover rpm. I'm a Stihl fan but have many Husqvarna saws up to the 3120. Pro saws only no matter what brand you like, everyone has to compete in the economy market.
Landfill, hey buddy, if ya read the comments know I'm thinking of ya and sending good energy and love your way from here in Oregon. 🤗 Man, that axe looks out of this world, a true Buckin special. Knarly profile! Hope everyone's doing well, love ya all, take care.
Hey Buckin, Rhett here from Kelowna. Just subbed and I love your videos and your attitude and I gotta say you inspire me to change. I'm an angry guy and your attitude is inspiring. Thanks for what and how you share.
New forged axe head is a beast! Love the mirror polish. As far as trimming down full-sized heads to make cruisers, I'm thinking that drawing the temper out of the edge might be a concern... unless you've got a friend with a water jet!
Second comment here... If Mr. Walker can get one, running the new Stihl 500i vs. that 572 would be a good test. Stihl pretty much released the 500i to make it's 462 obsolete. The power to weight ratio of the new fuel injected saw pretty much spanks the old technology. In any case, that would be a true test of each brand's current top of the line saw, although the 462 would be much closer in power to that 572.
Thank you folks for all your thoughts and prayers during my fight with covid 19 I felt each and every one of you and i truly appreciate everything you've done i am on the mend and look forward to being back in the comment sections thank you
Glad to see you winning the fight against this virus. Recovering from jt myself and it's certainly a little different than your run of the mill cold. Godspeed and best of luck to ya!
Wow! Nothing like Donny Walker handing you a beast like that! Looks like it performs exceedingly well! Love to all new subscribers and comrades. Sending out a special prayer for Becky and Landfill Rat!🙏🙏🙏🙏 Lieutenant Bradley
Does that 572 have auto tune? I got one of those saws and I could only get it in auto tune. I wanted a 576 without auto tune but the 572 was all they had. It was 200 off I don’t know if it’s a good thing or because they have issues
I've had a Husky climbing saw that doubles as a paper weight for the last twenty years. It was the last Husky I'll ever buy. 550.00 new and problems since day 1. Was constantly in and out of the repair shop. Biggest piece of crap I ever owned. Looks real pretty sitting in my shop next to a magnesium case home light with a bucking bar. That saw still runs perfect BTW 😅
@@jkgkjgkijk Easy now, I was just saying that it sounds like you were just unlucky with your one purchase and gently implying that maybe you shouldn't write the brand off for evermore as a result. If you disagree, cool, but that was the point. I thought this was a politics-free zone?
@@BuckinBillyRaySmith okay and a friend of mine has one and he was telling me a little bit about it and I guess I misunderstood what he was telling me on its size
Hi there Billy 572 is nice saw Can't wait to see what you think of the stihl 462 I was so fond of my old 066 till I got 462 or maybe I just getting older Love from Eire Gerry the Miller
@@MrDoofbooble watch my video called Husqvarna chainsaw cutting palm trees. The thumbnail shows the large palm. 2 foot across. Palms are full of sand and are known to while out chains fast!
@@GreatLakesLogger yea me to, especially over the old husky setup. if you have an old stihl with an normal carb or m tronic the switch is the same exact same, that cant be said for husky
Greetings Brother Buckin'!...interesting video of that Husky autotune saw, I have run a Jonsered CS2252 ulticor (basically a Husky saw with red paint)pro grade saw for about 3 years. It is a screamer for sure and needs to run full squirt. They have a different starting procedure to older saws and can be a pig to start of you don't follow the instructions.
Hello all! Sorry I missed everyone yesterday. I disappointed myself trust me. I love the saw there boys! My poulan runs like that has that fuel system definitely something to get use to lol. Love ya all!
That 572 sure does run nice! I’ve been kinda hit or miss lately with videos but I’m not sure what happened to landfill but he will definitely be in the thoughts and prayers. Love to you and the family❤️
That 572 is an animal in its element. However, I know it'd take some getting used to as I'm also more accustomed to saws with more bottom, and prefer that style of power delivery normally. I ran a stihl 038avs a lot along with an 034av and now run a echo 590 muffler modded and a muffler modded 394, so going to a screamer with less bottom would be very different. I feel that this is why the ms500i has such high praise because it has the screaming traits but also has bottom end that the 462 and 572 don't have so much of. Even though several tests where all 3 saws wear the same bar and chain typically puts the 500i in last place when self feeding alone. I'd guess that anything more than self feeding the results would flip, as well as when you get closer to needing a sharpening. Albeit all 3 saws seem to be about even save a couple 1/10ths here and there. No replacement for displacement I suppose. I'm real excited to see your reviews of the 462, and eventually the 500i. Rumor has it their is a 595xp in the works. It's due, as the 394/395 platform is pushing 30 years old now. That saw will likely be a game changer as well. Pretty pumped for that update as well.
Very nice to know! Ive been on the verge of getting a ms 462 but might wait now to see the comparison and thoughts. Ive got a 372xp right now and the weight of the 462 is what peaks my interest. Im sure both saws are great but its a tough choice. Thanks for the entertainment Buckin"!
Hey Buckin glad to see another great video! Thanks. I can't wait to see that axe get some action, it looks like a splitter that's for sure. Anyway all the best from Northern California. P.s. tell landfill we are thinking of him
The message that pops up with my alarm in the morning says "BE KIND" . It is the very first thing I see when I wake up. Even though I continue to have my struggles, I believe that every time I wake up and see that message and start my day with that mentality I am improving my life and hopefully the lives of everyone around me. Buckin,you are the main reason for me to have decided to change my outlook and actions. I started watching your videos to learn about tree work but I didnt know it would influence me to finally want to change entire life and become the best person I can. Thank you so much
14:25 I love my m tronic saw, never have to worry about it’s setting. Just start it and go. I like the snap the electronic carbs have, the throttle response is so nice.
yup my stihl 661 is sweet
I have the MS462-CM with a 32” bar. Full house, hand filed, it’ll cut through a 32” solid red oak trunk in a heartbeat. I use the MS201-CM for small trees and limbing. Love the electronic stuff.
800.00 for a MS 201 -cm is a lot for a chain saw just to limb wouldn't you say so ?
I'm thinking a craftsman for limbing would work great.
This is all Greek to me, I have not used a chain saw in my life. I think that at my age, I don't need another hobby and or trade. The video was a great informative lesson, thanks to Billy, again, you have made me a believer that you are at the top of your trade.
The two Axe's are beautiful, they seem to do the splitting job great. Either would be an asset in gathering firewood. However; here in SE Louisiana, I don't use more than one cord of firewood during our mild winters, our fireplaces are used for enjoyment, not heating.
Jona did a beautiful forging job on the Axe bit/head, it will make a fine Axe in end.
Wow stays hot there huh? I burn about 8 cords a year and sell about 25 a season
14 years old and bean using saws for 4 year and your the best you tuber going 👊🏽 keep up the good work
What’s up bud. Keep workin. Keep your nose to the grind stone. Be YOU. Don’t try to fit in. Do what’s right and be kind and you’ll grow to be better each day that passes. Stay positive and follow your spirit.
Sounds like a beast! And thats the reason why i love my Husqvarna 550 XP MK2
Enjoyed cutting trees Yesterday. "Sunday"
Was fun cutting the many methods for each tree. And especially those super leaners . Had a fun time getting that 1 leaner , to fall opposite of where it was sitting. Thanks a bunch
Oh friends, I needed this video today. Just a horrible day at work. Got passed over for a promotion for a relative of the boss. I'm finding it really hard to stay positive today, friends. But this helped a little. Hope you all are having a better day than I am. Cheers friends.
That's the system, just outwork everyone around you and if after 5 or 6 years move on, your work will pay off, stay pulling🤙
Thats gonna be great, i wish i could get my hands on an walkerized saw :)
Ya'll have a great day
I bought a 572 a couple weeks ago and I absolutely love it, got a full wrap for it and it's the most comfortable saw I've run.
Billy if you haven’t done it yet, DO IT. I just picked one of these up today because I needed, well really wanted something with more power. I ran a gallon of the husqvarna fuel through it just cutting logs seating the rings at 1/4 1/2 throttle. After I finished breaking it in I let her eat and holy cow man, I’m selling my 461 so I can get this saw worked. It’s an animal brother. The best part is it starts so easily. 3 pulls even brand new. After its run for a bit it’s 1 pull no choke even after sitting for 40 minutes. Husqvarna really did something with these 572’s man. I’m gonna have to see if I can’t take some videos myself. This saw gets me excited. Something I haven’t felt working a saw in a hot minute. I WANT to pick this thing up. It’s dark out and I still wanna go cut 😂
Bought one in the spring. Nothing has been done to it yet. Way glad I bought it.
Good show.
Really looking forward to this video! Stay well, friends. Be kind and help someone in need. 💚🪓☀️✊🏼
You have an ax emoji on yer phone im jealous 🤣
@@BikerBenny it’s great, but I’ll be even happier when they add a power saw! Have a truly amazing day!
Every human. Keep working. Keep DOING. Keep your nose to the grind stone. Be YOU. Don’t try to fit in. Do what’s right and be kind and you’ll grow to be better each day that passes. Stay positive and follow your spirit. BEST WISHES TO LANDFILL!
Hi to all the Bucking Army please remember to keep becky an the landfill rat in your prayers have a day love from TEXAS
Lifting them both up in prayer.
@@jasonpinckney2178 standing in agreement with you in Jesus mighty name!
@@jasonpinckney2178 Thanks JP
Pro trick : watch series on Flixzone. I've been using it for watching a lot of movies these days.
@Aarav Everett Yea, I've been using flixzone} for months myself :D
That axe head has an awesome wide profile Buckin. Love the thick pole too. Look forward to that build. Peace to you and ya family bro.
MAN TO BE ABLE TO DESIGN AND HAVE MADE YOUR OWN AXES, WHAT A GREAT DAY FOR THE CHANNEL. I AM SURE YOU WILL SELL A FEW. THANKS WALKERS FOR THE HELP
Hi to all. Im giving my 372 a blast tomorrow. Cant wait to hear the old girl fire up.Shes been sitting a while. 3rd pull and shes a goer! Take care everyone.
Tough to beat the 372xp. But I like the balance on the new 572xp very inviting for my lower back.
I have run a 572 xo an man that's the best saw in the world you just need to be used of it but man that saw is strong and ergonomic man
I recommended everybody that search a new professional saw.
Now I know what to replace my 372xp with when it dies 15 years old now but still strong but it is me that is not so strong now and the balance of the 572xp looks inviting to my lower back so perhaps before it dies?
my favorite bucking firewood saw ever was my old Mac 10/10 I ran that poor old saw till it died 😢 I miss it
Worth big coin today.
I'm a new subscriber! I just found your channel. Man...I love it! My first job was splitting wood when I was 15. Then I worked at a sawmill for 20 years. I would of still been there if they hadn't closed down. I worked my way up from stacking lumber to a Sawyer. And everything else in between. I would saw the logs into lumber. And even helped work on the band saws. They were 47 1/2 feet long, 12 inches wide and had 282 teeth. Miss that kind of work! It was hard! But...man I was strong as a bull. What is left of me is still strong! But...I'm 52 now. I did alot of stupid things thinking I was superman! lol. I'm on disability now because of it. But...man, I would give anything to do it all over again. I'm so glad I found your channel. This Bama man thanks you! For all that you do. 😊😊👍👍👊👊💪💪
Your positive energy is contagious. Bless you brother.
Thanks Don. Looking forward to seeing that saw perform...
Awesome how much don trusts you ,you'll love the 572 my friends got one he loves it took 8 tanks to break it in be safe billy
You the man Buckin. Thanks for sharing with us
She's a RIPPER!!!!! A few guys on YT have had them running for a while and they pull hard
I’ve built one in a little “hotter” state of tune than what you see in this video ... sweet saw with lotsa potential and great mileage to boot - and this is comin from a STIHL guy 😂 ... My 462c cuts a fuzz quicker but the 572xp definitely has it beat from a start / stop tickle the wood scenario ...
Oh yeah Buckin I love the handle bar design. My 570 XTorq has the same style handle. Mine is a bit big for my smaller hands but I love it. That axe is just PLUMB TAZZIELICIOUS BROTGER WOW. Thank you Donny Walker. Thoughts and prayers for Landfill and Becky Davis. Love you all. 🌲❤🌲✊
Greetings from West Virginia, God Bless
I have a 562xp. Love it. Only problem is hard restart when it's hot.
Wonderful video, Buckin’. Really enjoyed seeing the 572, and especially enjoyed the prototype of the new axe. Stay healthy and happy, my friend. Be kind folks! Have a truly great day. 🪓☀️✊🏼🧡
My 562XP has been a faithful friend with ton of hours on it. Havent had the chance to run 572XP. Thanks
That axe head at the end is wicked!!!!!! I need one asap!
Thank you walkers for letting Billy run a new saw! Whoohoo!
Thanks for the good advice the News will drive you crazy! 🤪Just watch Buckin and you will inherit goodness in your life! ❤️
nice saw. very excited about prospect of a true buckin special
Nice power saw , I have the 562 it’s been a great saw , that axe looks amazing, it’s gonna split like crazy .
Really like the 500 series saws from Husqvarna
Buckin you are the best, you are an inspiration. Bless you brother! Oh, and love that prototype! I bet that thing will smash some 'fir'!
Walkers seam awesome wish we had a saw shop here like them. Army stay safe and well👍✊
Thank you Jonah and Conrad Blacksmithing. So awesome.🌲❤🌲✊
Buckin I just bought me a 572XP this past week. It's a beast in my book!!!!
Looks like the iron horse knows how do that Poulan up right. Can’t wait to see it run.
Mmm Mmm Mr. Walker Sure Knows His Business, She Sure Cuts Eh ? Love Them Steel Splitters ! Prayers For Land-Fill & Family & Hugs & Prayers For Bo Bo & Family ! Be Well All ! ATB T God Bless
a video on monday even after the live yesterday! Sweeeeeeet! Thanks buckin
WOW COOL BUCKIN AXE!!!!!!!!!!...... thanks 4 video. be kind.
Another great video BBR! Fantastic saw from Donny Walker!! I can see you testing the kahonas off of it haha. Love those two axes very nice and the very last one....the prototype...just wonderful. Take care and be safe, love and kindness to one and all. Graham🇬🇧🇬🇧🌲🌲🌲🌲
Not putting the saw down, had a guy that worked for me that had one and he loved it. The saw really seemed to cut, but with my experience Husqvarna saws seem to flat bog to a stop with no chance to recover rpm. I'm a Stihl fan but have many Husqvarna saws up to the 3120. Pro saws only no matter what brand you like, everyone has to compete in the economy market.
Like the looks of that Husky! And can’t wait to see that axe bash wood. That thing looks so gnarlly! Love from Idaho❤️
Wow buckin. I am in love with that axe head of yours.
Landfill, hey buddy, if ya read the comments know I'm thinking of ya and sending good energy and love your way from here in Oregon. 🤗 Man, that axe looks out of this world, a true Buckin special. Knarly profile! Hope everyone's doing well, love ya all, take care.
Hey Buckin, Rhett here from Kelowna. Just subbed and I love your videos and your attitude and I gotta say you inspire me to change. I'm an angry guy and your attitude is inspiring. Thanks for what and how you share.
Now that’s a beauty! Really shiney! ❤️🪓
New forged axe head is a beast! Love the mirror polish. As far as trimming down full-sized heads to make cruisers, I'm thinking that drawing the temper out of the edge might be a concern... unless you've got a friend with a water jet!
Second comment here... If Mr. Walker can get one, running the new Stihl 500i vs. that 572 would be a good test. Stihl pretty much released the 500i to make it's 462 obsolete. The power to weight ratio of the new fuel injected saw pretty much spanks the old technology. In any case, that would be a true test of each brand's current top of the line saw, although the 462 would be much closer in power to that 572.
Hey buckin, hope all is good over on that side of the world, I just wanted to ask a favor if you could please pray for our farmers in South Africa 🙏🇿🇦
Prayers going out to you all now.
Thank you folks for all your thoughts and prayers during my fight with covid 19 I felt each and every one of you and i truly appreciate everything you've done i am on the mend and look forward to being back in the comment sections thank you
Landfillrat
Glad to see you winning the fight against this virus. Recovering from jt myself and it's certainly a little different than your run of the mill cold. Godspeed and best of luck to ya!
Hey buckin. How about that Donny walker.
What a guy.!!!!!
Kindness and love
Wow! Nothing like Donny Walker handing you a beast like that! Looks like it performs exceedingly well! Love to all new subscribers and comrades. Sending out a special prayer for Becky and Landfill Rat!🙏🙏🙏🙏
Lieutenant Bradley
I was just talking about this in the live feed yesterday. I love my 572❤ GOTTA LOVE THE HUSQVARNA "AIR JET" beats the stihl hands down.
Nice running saw, would be fun to run one of them. It’s been great having Donny Walker on the channel, man that guy knows his powersaws.
Does that 572 have auto tune? I got one of those saws and I could only get it in auto tune. I wanted a 576 without auto tune but the 572 was all they had. It was 200 off I don’t know if it’s a good thing or because they have issues
Perfect video for this evening. Now I’m going off to bed to saw logs
G'day Buckin n friends, that prototype axe looks very special well done 👍.
Nice phaner pants, they are great. stay safe
I've had a Husky climbing saw that doubles as a paper weight for the last twenty years. It was the last Husky I'll ever buy. 550.00 new and problems since day 1. Was constantly in and out of the repair shop. Biggest piece of crap I ever owned. Looks real pretty sitting in my shop next to a magnesium case home light with a bucking bar. That saw still runs perfect BTW 😅
A lot of happy Husky owners here. You can get a lemon from any literally brand, so sounds like you were just unlucky.
@@jimalmy5559 a lot of happy democrats here too, I'm not one of them. What's your point?
@@jkgkjgkijk Easy now, I was just saying that it sounds like you were just unlucky with your one purchase and gently implying that maybe you shouldn't write the brand off for evermore as a result. If you disagree, cool, but that was the point.
I thought this was a politics-free zone?
Looking good boys !!!!
Go for it Buckin! Walkerize that beast!. Give 'er the old Shabango to the trees!
The 572 XP Is A Nice Saw And One Of The Best 80cc Saws Currently
70.6
@@BuckinBillyRaySmith okay and a friend of mine has one and he was telling me a little bit about it and I guess I misunderstood what he was telling me on its size
Hi there Billy 572 is nice saw
Can't wait to see what you think of the stihl 462 I was so fond of my old 066 till I got 462 or maybe I just getting older
Love from Eire
Gerry the Miller
Oh man. I need to up my saw game for when I’m in these huge palm trees. My little 450 rancher dosent like them. Even with a full chisel skip tooth
You are in palm trees that a 450 isnt enough??? Holy cow I had no idea those trees got so big.
@@MrDoofbooble they can get quite big
@@MrDoofbooble watch my video called Husqvarna chainsaw cutting palm trees. The thumbnail shows the large palm. 2 foot across. Palms are full of sand and are known to while out chains fast!
Now we are talking. I use 572xp for almost 2 years. Best one I ever used.
1:15 this husky setup is just an inverse of stihl. The whole switch is just upside down. It’s the same starting procedure and everything.
I personally prefer Stihl switches
@@GreatLakesLogger yea me to, especially over the old husky setup. if you have an old stihl with an normal carb or m tronic the switch is the same exact same, that cant be said for husky
Thank you Donny Walker for the loaner saw. I like seeing tests like this. What about the biggest echos?
Greetings Brother Buckin'!...interesting video of that Husky autotune saw, I have run a Jonsered CS2252 ulticor (basically a Husky saw with red paint)pro grade saw for about 3 years. It is a screamer for sure and needs to run full squirt. They have a different starting procedure to older saws and can be a pig to start of you don't follow the instructions.
Man that´s a MONSTER! Keep her chewing wood!!!
Love the golfer swing
Sending light and prayers to the Landfill Rat and Becky. My the good Lord bless them and help them through these trying times.
Magnifying glass in hand an watching BBRS. Wouldnt do that for anyone else. Hello to the Bucking army an goodday.to all.
Hello all! Sorry I missed everyone yesterday. I disappointed myself trust me. I love the saw there boys! My poulan runs like that has that fuel system definitely something to get use to lol. Love ya all!
That 572 sure does run nice! I’ve been kinda hit or miss lately with videos but I’m not sure what happened to landfill but he will definitely be in the thoughts and prayers. Love to you and the family❤️
That 572 is an animal in its element. However, I know it'd take some getting used to as I'm also more accustomed to saws with more bottom, and prefer that style of power delivery normally. I ran a stihl 038avs a lot along with an 034av and now run a echo 590 muffler modded and a muffler modded 394, so going to a screamer with less bottom would be very different.
I feel that this is why the ms500i has such high praise because it has the screaming traits but also has bottom end that the 462 and 572 don't have so much of. Even though several tests where all 3 saws wear the same bar and chain typically puts the 500i in last place when self feeding alone. I'd guess that anything more than self feeding the results would flip, as well as when you get closer to needing a sharpening. Albeit all 3 saws seem to be about even save a couple 1/10ths here and there.
No replacement for displacement I suppose.
I'm real excited to see your reviews of the 462, and eventually the 500i.
Rumor has it their is a 595xp in the works. It's due, as the 394/395 platform is pushing 30 years old now. That saw will likely be a game changer as well. Pretty pumped for that update as well.
Very nice to know! Ive been on the verge of getting a ms 462 but might wait now to see the comparison and thoughts. Ive got a 372xp right now and the weight of the 462 is what peaks my interest. Im sure both saws are great but its a tough choice. Thanks for the entertainment Buckin"!
hi.that protype axhead its looking very good. aim sure its going split wood great
the new buckin axe head looks amazing!!!
Hey Buckin glad to see another great video! Thanks. I can't wait to see that axe get some action, it looks like a splitter that's for sure. Anyway all the best from Northern California. P.s. tell landfill we are thinking of him
PRAYERS GO OUT TO YOU LANDFILL STAY STRONG BUDDY
How ya doing Buckin? Always happy to see you. BIRTHDAY TOMORROW!!!
I bought a brand new 565
Auto tune and I like it.
Will be awesome once it’s
Ported 🙂🙂
Get one Buckin. Need your opinion. Don't hold back. I don't like the squeeze bulb. I miss my 266. But love my echo 620. I'm a firewood guy.
Looks like one heck of a axe, should split with the best of them.
Go for it buckin get a 572xp. I just had Donnie build me a 562xp and I’m thinking about have them build me a 572 now
CONGRATS ON your buckin special
Thanks Don 👌✌️✊
Hi Buck'in how's the 572xp feeling with the full wrap handle? What bar is on it?
Awesome
Buckin', is that you wearing new saw pants? Did Hogan suggest them? Just wondering..... Be safe as this too shall pass, one day at a time.
Those 572 💪💪
Yes dice ONE UP!!!!!!
Great to climb with the 572xp as well. Such smooth power and much nicer to use than the 395 up a tree. We are replacing all our 562s with them
Bloody legends. The lot of yas.
What a beast of a saw! Walkerized! Hahaha