Harley Davidson CV Carburetor Cleaning

Поділитися
Вставка
  • Опубліковано 17 гру 2024

КОМЕНТАРІ • 29

  • @brianvaldez9153
    @brianvaldez9153 7 місяців тому +3

    This video helped me so much, very detailed walkthrough. I appreciate the step by step. 👍

  • @jerryriggedadventures3173
    @jerryriggedadventures3173 2 роки тому +2

    Very informative and right to the point. Great video.

  • @JakeGarbeck
    @JakeGarbeck 11 місяців тому +1

    I am noticing when I spray into accelerator pump jet the nozzle is not spraying like yours is. It’s more irregular and not a nice fan like spray. How should I fix this?

    • @aronsgarage834
      @aronsgarage834  11 місяців тому +1

      Try to flush it with carb cleaner a few times, then with compressed air, and see if it fixes it. Worst case scenario you have to change the nozzle.

    • @JakeGarbeck
      @JakeGarbeck 11 місяців тому

      I removed nozzle and sprays well alone but when I put it back on it still sprays irregularly. I put carb spray and compressed air through pathway with nozzle off as well. Could this be normal?

    • @aronsgarage834
      @aronsgarage834  11 місяців тому +2

      Ok, it must be that little steel ball in the float bowl then. When you shake the float bowl you normally hear it moving. Might be stuck partially.
      Might be worth cleaning it in an ultrasonic cleaner to free it up properly. Or spray wd40 in there and let it soak for a while.

    • @IRONTOSS
      @IRONTOSS 7 місяців тому +1

      Awesome thorough video on cleaning a carb properly.

  • @Smylzncries
    @Smylzncries Рік тому +2

    Great vid.

  • @leekilgore4711
    @leekilgore4711 2 роки тому +2

    lots of good info thank you

  • @porcupinebob7907
    @porcupinebob7907 3 дні тому +1

    Thanks!, great video, very detailed!, I have a CV on my TC88 Harley Heritage that keeps having a cough as I leave the stop sign, at 1/3 throttle it coughs, the main jet further with more throttle is ok, I cleaned the jets and its been turned for the pipes and all, I think its a slow jet canal that you sprayed near the butterfly, I'll let you know how it goes! Thx again! ;o)

    • @aronsgarage834
      @aronsgarage834  3 дні тому +1

      Glad it’s helpful! Yes, that passage can clog up real easy. Also, worth checking your float level, too. Let me know how you get on!

    • @porcupinebob7907
      @porcupinebob7907 2 дні тому +1

      @@aronsgarage834 Hi, well, I sprayed all the canals as you did, put it all back together, then, this morning I went to start it, and it wont start WTH!! it ran fine except for the slight cough at 1/3 throttle, I took it apart again now and all the jets are clear, the float is fine, what the hell happened??? this sux!!!, it ran my new battery down trying so much...

    • @aronsgarage834
      @aronsgarage834  День тому +1

      There is something you would have have missed putting it back together as cleaning your carb thoroughly would never cause any problems.
      Did you re-set your mixture screw properly? How many turns out was it at when you removed it?

    • @porcupinebob7907
      @porcupinebob7907 День тому +1

      @@aronsgarage834 Hi, yes, I always am very attentive, it seems I had no spark "all of a sudden", so, checking the codes on the dash showed it was a crankshaft position sensor....so, I'll let you know more after it arrives lol fackin BS harleys! I'm going back to my Kawasaki ZRX1200R "Bulletproof!"

    • @aronsgarage834
      @aronsgarage834  День тому

      That’s interesting, I never had that problem. Yeah, let me know if you get it resolved.

  • @intergalacticprophylactic
    @intergalacticprophylactic 2 роки тому +4

    Your the shit bud. Much appreciated

    • @aronsgarage834
      @aronsgarage834  2 роки тому +1

      Thanks bud

    • @intergalacticprophylactic
      @intergalacticprophylactic 2 роки тому +2

      @@aronsgarage834 just got done putting mine back together. Sanded down a flathead that was just a little too wide to fit down to the "idle" jet. Other than that smooth sailing. Thanks again.

    • @aronsgarage834
      @aronsgarage834  2 роки тому

      Great stuff!

  • @stevencameron1562
    @stevencameron1562 5 місяців тому

    Does the 96 fatboy have a carburetor?

    • @aronsgarage834
      @aronsgarage834  5 місяців тому

      No, 96 is fuel injection.

    • @stevencameron1562
      @stevencameron1562 5 місяців тому +1

      @@aronsgarage834 God damn it. Ok, thank you!

    • @SF-oh5ud
      @SF-oh5ud 3 місяці тому

      What’re you talking about??? The 96 Fatboy has the old evolution motor with a carburetor, not fuel injected.

    • @stevencameron1562
      @stevencameron1562 3 місяці тому

      @SF-oh5ud ok thank you.

    • @aronsgarage834
      @aronsgarage834  3 місяці тому

      Of course! Sorry guys, not sure what I was thinking when I said that. My bad