Wow I'm so sorry that metal detector was a piece of garbage. I hope you can find a better one. Good luck treasure hunting, and GOD BLESS YOU FOR TRYING TO FIND THE MISSING LOVED ONES!!!! AMEN 🙏
Something is not right. Garret makes a better product than that. I don't own one and never have but know a lot of people that swear by the product. Good to see you making beeps.
Hi, Jeremy. In spite of the detector not working as it should, I still enjoyed your video. I can't help but wonder what treasures you may have missed bc of the detector. Overall, nice to see you relaxing on your 'day off'. Thanks for sharing. Stay healthy and safe 👍🏽 ⭐ ⭐ ⭐ ⭐
For starters, Never use "Coin" mode. Go into "Custom" and turn off everything 30 and below. What's happenening it's detecting the silver coin and the iron at the same time, 96+15=111.5 (96 for the silver coin and 15 for the Iron), Devide that by 2 you get 55.75, Outside the "Coin" range. All depends on what registers at what time within the EMF. I know on mine there is a "Ground Balancing" option and since you're searching in what looks like clay it should have been calibrated to the ground along with your Pin Pointer.
That place looks great....soil is dug up...and any treasure digging won't make people angry. Really stinks the detector isn't working right. Hopefully you can figure it out.
Hi Nug! I’m really happy that you have made this video about that Gerratt apex because I’m looking for one at the moment. But now I don’t think it’s the one for me. Uk field’s have lots of Roman settlements. Rob from the 🇬🇧🍺
Hey I think you did a great job helping people know information about products if they decide to start metal detecting or what ever they want to do, THANK YOU VERY MUCH!!!!!
I should get a metal detector. I'm in process of leveling up my old barn floor. I got a couple of 116 year old bottle's and some old saddle buckles, buttons , old brass bell, found a spoon . This building has been here since late 1800's hard to tell what's all here
My detector is old and needs replaced. I need to go metal detecting again, it's been ages. Thanks for reminding me. 😊 Hopefully you guys make some more detecting videos when you can. See you next time.
Easiest way to quickly sort out the ferrous-scrap is to carry a strong magnet in a clip-lock plastic-bag (makes it so much easier to remove fine particles of rusted iron & steel), however some soils, particularly that reddish clay, can have actually contain a high quantity of iron which will always make it difficult for most metal-detectors to discriminate different materials!
Jeremy I think the problem with the metal detector is you weren't holding your tongue right. 🤣🤣🤣 Sorry the detector didn't work for you. I know that can be very aggravating for something not to work right after spending money on it. Hopefully you can return it and get your money back. May God Bless and keep you and your Family Safe 💞 Stay Happy 😂 Safe and Healthy Everyone 💞
Jeremy, have you seen the detector that DALLMYD, Jiggin with Jordan and Nora Svet use? I know it’s expensive but maybe you should bite the bullet, send that one back and get a Minelab Excalibur. They’re about $1,600. Or keep that one. I’m just making a suggestion. Thanks for doing what you do.
@@ozzyalchemist8806 My own backyard for starters. A few years ago, I planted an apple tree and hit all kinds of junk including an old brass mailbox nameplate. My property is like 140 years old and God only knows what is buried here. My dad said my property was once a propane dealership. Which is why I couldn’t get anything to grow in the center of it. It was a parking lot.
Dissapointed when this machine came out (just after Vanquish). Only advantage with Apex, Multi Salt mode makes it a dream on beach, but its not even waterproof! big draw back. I was hoping to see a multi frequency AT machine (only thing the Max is missing). ❤ATMax (waterproof 3m).
I found war nickel and a 1941 quarter with my apex on the 3rd hunt . I have had very good luck with mine. I do think that there are better machines out there. But for the price it an awesome machine.
I have used the AT Pro for several years. When I first got the Apex it was a difficult learning curve and I put it down for awhile. But I have picked it back up and used it a lot and as I have gotten used to it it has produced well for me. Going back over spots I thought were "dug out" I have been pleasantly surprised to find more good targets. I have found several Walkers in varying soil conditions. The same with Mercury dimes. One of my fields is a complete iron bed of nails from a house that burnt down. I have found a Barber dime and a silver back to a lapel pin. I have also found a Gold ring in an iron heavy field. I hope you give it more time and varying settings and conditions before throwing it in the garbage column. Love your videos.
Thats really disappointing. Once the iron touched the silver coin. It contaminated the signal and made it worthless. Yep, it is garbage. Thanks jeremy for an honest review of your metal detector, even though you werent trying to do so!
Things on the surface will read different than when they are buried. Different soils can affect the reading too. My husband and I have 2 Whites metal detectors. Mine’s a Prism IV, shows depth, has discrimination and target shows on a graph, no ID numbers. His is a Spectrum, discrimination, ID, depth, manual ground balancing, lots of programs. They both do about the same but mine is easier, turn it on and you’re ready. We moved from Oregon to Montana and they are both working differently than before. The depth is showing much shallower and we would be rich if all the silver signals weren’t old beer cans. We are digging all the signals at our place as it used to be a general store and post office and there was once a town in our pasture.
On down times you should talk about anything and everything about your time on the USS carl Vinson...no matter how much we have done in our lives or how much education we have we haven't been on a nuclear powered aircraft carrier
I remember a documentary on the carl Vinson ...they said the Panama canal was down...so they went all the way south in the Atlantic then crossed into the Pacific...I remember thinking I don't believe the Panama canal was out of order..so it had to be something secret..
The apex does tell you what is good or bad if you set it correctly and pay attention to the display. Sensitivity if set too low will make it miss silver
I've lost count of how many detectors I've had over the years. Now I am using a Minelab Vanquish 540 with the wireless headphones. I give it a 10+++ Wonderful detector.
I hear that Whites Metal detectors are good some detectors have discriminators on them. this detector might not have that built in. it could be it’s not tuned.
Not any different result on that silver coin + iron, than other detectors. You just don’t have it set up right. If you want to discriminate iron, then follow the directions. Many of us have successfully used the Apex to discriminate iron.
Hi. I just want to say, I know you must enjoy ur "day job" & now, you share ur "off time" with us. You have a great life, please be careful and enjoy it. One more thing, I've been following the Kiely Rodni story. I'd like to get ur take on the condition of her Honda, when it was pulled out. I saw the drivers side window was broken out, the side mirror on the driver's side was also broken off, just dangling. I also noticed the driver's side rear passenger window was down, those windows don't usually roll all the way down, so in that case, it looks to me like it's rolled down as low as it would go. I think there was plenty of room for her to get out. I don't know a out the very back glass or the other side windows or side mirror. Kiely's car was also upside down when they found it. I'm quite sure you already know all this. So, allow me, with ur experience, does a an support normally roll over when it hits the water or after it's submerged? And is the damage to the driver's window & mirror normal? Do you have an idea how fast she was going to be 55 feet from the bank? Really, would just like ur input. I promise I'm not affiliated with any LE or news channel & I don't have a UA-cam channel. In advance, I appreciate ur consideration. Of course, please continue to share with us & get a new metal detector, not much telling what you've missed. I love ur video's & you have a nice, comforting voice. Best wishes from Dallas, Texas ❤
Assuming there were no currents, assuming you know the weight of the car, the weight of the victim involved, the height of the bank, you should be able to apply a ballistics formula used calculating the trajectory of a fired round of ammunition at a certain range by plugging in meters of feet per second which are convertible to kilometers or miles per hour.. What you might have problems with is figuring out the weight of the fuel that the car had in the tank and the weight of the personal effects that were in the vehicle at the time of the incident to be factored into gross vehicle weight. To be conservative, I'd estimate half a tank of gas.
Just my opinion but it makes sense that if you are provided a product and all you have to do is promote the hell out of it then that’s what you do . I’ve seen some diehards that’s really into this carry up to three brands , different size coils , etc .
I tried an Apex when they first came out and it wasn not at all as bad as your expeience, I even found a Peace Dollar down about 5.5” in a trashy park with the Apex. I wonder what mode and settings you were running here back then? That said, Amazing how fast the evolation of detectors has changed to current day. Garrett was the brand I started with in the 80’s and I ahoping their new Storm series gets them back into the mix of being either at or ahead of the modern-day detector tat take on both the Minelab Xterra Elite and the Nokta Triple Score at the value end of Simulateous Multi-Frequency, and take on the XP Deus II and Minelab Manticore at the higher end offerings.I’ve put my purchase decision off until after the upcoming June 18th reveal from Garrett.
Try the MineLab go find 66... Probably the best all round cheap fun Metal detectors available..iv got a minelab 60 (old Version of the 66)...it works ok at cutting out the iron stuff.
Does the Apex have Ground Balancing...? Different Grounds have different chemicals and minerals.... when you go from a Beach to graded Earth ya need to Ground Balance the machine again....?
Jeremy move slowly between metals it got a Five seconds switch from metals to metals it not just your detector that does that all digital detectors do that now the old one didn't do that because they detect Faris and non-fairs the new digital detectors detect Faris and non-fairs and density so you have to move it slower but you save time by know the metals before you dig them up.read the manual that is why it came with the detector.
Garett apex work same as minelab 600 but one goes to 20 600 goes to 15 khz but my at pro with 13 inch can find small targets with after market coil think these change frequently a bit or cover more ground
Jeremy you should reach out to Garrett I think your unit needs calibration. It is not consistent and fluctuates way to much. Did you get batteries from Britain? Just Kidding . Reach out they probably replace yours or something. Dale Nickel Janesville Wisconsin
I was going to comment but the people that have and are obviously experienced have said it all. You should just go and gain a little experience yourself. Have a great day!!
Watching this video since husband was talking about getting a metal detector. We need out in the water, looking for Lost Loved Ones. I'm sure you need a mental break from that. I don't trust mental detector - good luck Too much junk out there. Good ad for that brand.
Maybe you got it a dud it happens maybe the equipment is faulty send it back with the video let me give you a new one maybe it has a default I don't know I've heard good things but I bought one for 20 bucks with a kid and I didn't know what I was doing I was not happy either but technology is not my friend. But I did love the video go back in the water buddy
Wow, it feel so relaxing to see my broker talked about here, thought I'm the only one that knows Brooks Walker, I guess he's good works speaks for him now, he has build a good legacy for himself
Goes to show Dig Everything 👍 Check out Stealth Diggers/ Not Thursday. You might talk to him about your Detector see what he says about the settings. Just a thought 😎
Sorry, your test was not well done at all. First, you admitted you "might be doing something wrong" - you didn't show us your settings. Second, show a detector that would show that quarter next to that giant piece of iron you had.
My twin boys are addicted to metal detecting. One just found a 1822 one cent peice. How cool is that!
It is nice to know that the Garrett is not all that good and just watching you work with it tells me I don't want one of those.
Wow I'm so sorry that metal detector was a piece of garbage. I hope you can find a better one. Good luck treasure hunting, and GOD BLESS YOU FOR TRYING TO FIND THE MISSING LOVED ONES!!!! AMEN 🙏
Something is not right. Garret makes a better product than that. I don't own one and never have but know a lot of people that swear by the product. Good to see you making beeps.
Hi, Jeremy. In spite of the detector not working as it should, I still enjoyed your video. I can't help but wonder what treasures you may have missed bc of the detector. Overall, nice to see you relaxing on your 'day off'. Thanks for sharing. Stay healthy and safe 👍🏽 ⭐ ⭐ ⭐ ⭐
Thank you for sharing the information. I was wanting to get a metal detector, but I don't want to buy junk.
For starters, Never use "Coin" mode. Go into "Custom" and turn off everything 30 and below. What's happenening it's detecting the silver coin and the iron at the same time, 96+15=111.5 (96 for the silver coin and 15 for the Iron), Devide that by 2 you get 55.75, Outside the "Coin" range. All depends on what registers at what time within the EMF. I know on mine there is a "Ground Balancing" option and since you're searching in what looks like clay it should have been calibrated to the ground along with your Pin Pointer.
It could be your coil when I first got my Garrett machine the coil was bad and they ship me another one and I haven’t had any problems since
That place looks great....soil is dug up...and any treasure digging won't make people angry. Really stinks the detector isn't working right. Hopefully you can figure it out.
Would love more metal detector vids. I always wanted to scan my property
Hi Nug! I’m really happy that you have made this video about that Gerratt apex because I’m looking for one at the moment. But now I don’t think it’s the one for me. Uk field’s have lots of Roman settlements. Rob from the 🇬🇧🍺
Hey I think you did a great job helping people know information about products if they decide to start metal detecting or what ever they want to do, THANK YOU VERY MUCH!!!!!
I should get a metal detector. I'm in process of leveling up my old barn floor. I got a couple of 116 year old bottle's and some old saddle buckles, buttons , old brass bell, found a spoon . This building has been here since late 1800's hard to tell what's all here
My detector is old and needs replaced. I need to go metal detecting again, it's been ages. Thanks for reminding me. 😊 Hopefully you guys make some more detecting videos when you can. See you next time.
Easiest way to quickly sort out the ferrous-scrap is to carry a strong magnet in a clip-lock plastic-bag (makes it so much easier to remove fine particles of rusted iron & steel), however some soils, particularly that reddish clay, can have actually contain a high quantity of iron which will always make it difficult for most metal-detectors to discriminate different materials!
It was great to see you guys anyway . can't wait for the next one
That wasn't A quarter it was A half dollar.
I somehow have the same problems with metal detectors . 🙄
Can't wait for the special You talk about . ☺
Jeremy I think the problem with the metal detector is you weren't holding your tongue right. 🤣🤣🤣
Sorry the detector didn't work for you. I know that can be very aggravating for something not to work right after spending money on it. Hopefully you can return it and get your money back. May God Bless and keep you and your Family Safe 💞
Stay Happy 😂 Safe and Healthy Everyone 💞
Jeremy, have you seen the detector that DALLMYD, Jiggin with Jordan and Nora Svet use? I know it’s expensive but maybe you should bite the bullet, send that one back and get a Minelab Excalibur. They’re about $1,600. Or keep that one. I’m just making a suggestion. Thanks for doing what you do.
This is EXACTLY why I am reluctant to buy a metal detector.
I don't want to buy junk on my first time out.
I have been really happy with my Minelab!
1st question, where do you want to hunt? Narrows down your selection.
I binge watched UA-cam for 3mths before deciding which machine was right for me.
@@ozzyalchemist8806
My own backyard for starters.
A few years ago, I planted an apple tree and hit all kinds of junk including an old brass mailbox nameplate.
My property is like 140 years old and God only knows what is buried here.
My dad said my property was once a propane dealership. Which is why I couldn’t get anything to grow in the center of it. It was a parking lot.
@@brian70Cuda
I’ll check into it!
@@ozzyalchemist8806what did you end up going with ?
Dissapointed when this machine came out (just after Vanquish).
Only advantage with Apex, Multi Salt mode makes it a dream on beach, but its not even waterproof!
big draw back.
I was hoping to see a multi frequency AT machine (only thing the Max is missing).
❤ATMax (waterproof 3m).
I found war nickel and a 1941 quarter with my apex on the 3rd hunt . I have had very good luck with mine. I do think that there are better machines out there. But for the price it an awesome machine.
That square nail looked like a horse shoe nail to me.
Thanks for the video. You always have informational videos, as well fun to watch. No Garrett for me and mine. Blessings and be safe.
I have used the AT Pro for several years. When I first got the Apex it was a difficult learning curve and I put it down for awhile. But I have picked it back up and used it a lot and as I have gotten used to it it has produced well for me. Going back over spots I thought were "dug out" I have been pleasantly surprised to find more good targets. I have found several Walkers in varying soil conditions. The same with Mercury dimes. One of my fields is a complete iron bed of nails from a house that burnt down. I have found a Barber dime and a silver back to a lapel pin. I have also found a Gold ring in an iron heavy field. I hope you give it more time and varying settings and conditions before throwing it in the garbage column. Love your videos.
Thats really disappointing. Once the iron touched the silver coin. It contaminated the signal and made it worthless. Yep, it is garbage. Thanks jeremy for an honest review of your metal detector, even though you werent trying to do so!
Are you searching down there where they are building all of the new stuff next to the river I hear they’re building some type of a fantastic waterpark
Things on the surface will read different than when they are buried. Different soils can affect the reading too. My husband and I have 2 Whites metal detectors. Mine’s a Prism IV, shows depth, has discrimination and target shows on a graph, no ID numbers. His is a Spectrum, discrimination, ID, depth, manual ground balancing, lots of programs. They both do about the same but mine is easier, turn it on and you’re ready. We moved from Oregon to Montana and they are both working differently than before. The depth is showing much shallower and we would be rich if all the silver signals weren’t old beer cans. We are digging all the signals at our place as it used to be a general store and post office and there was once a town in our pasture.
Yeah something is definitely going on with that machine…
On down times you should talk about anything and everything about your time on the USS carl Vinson...no matter how much we have done in our lives or how much education we have we haven't been on a nuclear powered aircraft carrier
I remember a documentary on the carl Vinson ...they said the Panama canal was down...so they went all the way south in the Atlantic then crossed into the Pacific...I remember thinking I don't believe the Panama canal was out of order..so it had to be something secret..
I'll name that tune in 7.
🏴 Betty from Scotland 🏴
My Etrac has never let me down.
The apex does tell you what is good or bad if you set it correctly and pay attention to the display. Sensitivity if set too low will make it miss silver
Hey Jeremy! If I ever buy one it won’t be that brand! Thanks for sharing this!
I've lost count of how many detectors I've had over the years. Now I am using a Minelab Vanquish 540 with the wireless headphones. I give it a 10+++ Wonderful detector.
Big giant chunk of steel well looks like an old piece of leaf spring
I had an ATPro which was trash, now using the Equinox800 and love it.
Informative video
I never liked any medal detector, i guess it a hobby I don't like digging LOL. But looks interesting.
I hear that Whites Metal
detectors are good
some detectors have
discriminators on them.
this detector might not
have that built in.
it could be it’s not tuned.
Whites is no longer in business, which is a shame. I have a Prism IV and my husband has a Spectrum.
@Martha Mitchell ~ that’s a
shame metal detectors are fun
going to the beaches too.
Not any different result on that silver coin + iron, than other detectors. You just don’t have it set up right. If you want to discriminate iron, then follow the directions. Many of us have successfully used the Apex to discriminate iron.
Hi. I just want to say, I know you must enjoy ur "day job" & now, you share ur "off time" with us. You have a great life, please be careful and enjoy it.
One more thing, I've been following the Kiely Rodni story. I'd like to get ur take on the condition of her Honda, when it was pulled out. I saw the drivers side window was broken out, the side mirror on the driver's side was also broken off, just dangling. I also noticed the driver's side rear passenger window was down, those windows don't usually roll all the way down, so in that case, it looks to me like it's rolled down as low as it would go. I think there was plenty of room for her to get out. I don't know a out the very back glass or the other side windows or side mirror. Kiely's car was also upside down when they found it. I'm quite sure you already know all this. So, allow me, with ur experience, does a an support normally roll over when it hits the water or after it's submerged? And is the damage to the driver's window & mirror normal? Do you have an idea how fast she was going to be 55 feet from the bank? Really, would just like ur input. I promise I'm not affiliated with any LE or news channel & I don't have a UA-cam channel. In advance, I appreciate ur consideration.
Of course, please continue to share with us & get a new metal detector, not much telling what you've missed. I love ur video's & you have a nice, comforting voice.
Best wishes from Dallas, Texas ❤
Assuming there were no currents, assuming you know the weight of the car, the weight of the victim involved, the height of the bank, you should be able to apply a ballistics formula used calculating the trajectory of a fired round of ammunition at a certain range by plugging in meters of feet per second which are convertible to kilometers or miles per hour.. What you might have problems with is figuring out the weight of the fuel that the car had in the tank and the weight of the personal effects that were in the vehicle at the time of the incident to be factored into gross vehicle weight. To be conservative, I'd estimate half a tank of gas.
Love that metal detecting.
Just my opinion but it makes sense that if you are provided a product and all you have to do is promote the hell out of it then that’s what you do . I’ve seen some diehards that’s really into this carry up to three brands , different size coils , etc .
I tried an Apex when they first came out and it wasn not at all as bad as your expeience, I even found a Peace Dollar down about 5.5” in a trashy park with the Apex. I wonder what mode and settings you were running here back then?
That said, Amazing how fast the evolation of detectors has changed to current day. Garrett was the brand I started with in the 80’s and I ahoping their new Storm series gets them back into the mix of being either at or ahead of the modern-day detector tat take on both the Minelab Xterra Elite and the Nokta Triple Score at the value end of Simulateous Multi-Frequency, and take on the XP Deus II and Minelab Manticore at the higher end offerings.I’ve put my purchase decision off until after the upcoming June 18th reveal from Garrett.
Apex brand I had nothing but bad luck with the brand. Thanks for sharing.
Try the MineLab go find 66... Probably the best all round cheap fun Metal detectors available..iv got a minelab 60 (old Version of the 66)...it works ok at cutting out the iron stuff.
I’m actually thinking of going all in on a minelab equinox 800
@@exploringwithnug yep that will do it 😊👍..
Nug, if you’re on discriminating mode a broken signal or sporadic signals could be the detector telling you it’s junk metal and to not dig it.
I wish I could just eliminate all iron junk signals and focus on the good studf
@@exploringwithnug me too
Loved the video a no BS straight to the point...If you ever need help with a detector I got you covered!
What frequency? Put it in multi frequency. The ground and iron is hit and masks other signals. Love my Apex great if set right.
Also your sensitivity is to low. Turn iron volume down. You just don’t have it set right
Maybe a part of leaf spring.
I think that metal piece was a rusted leaf spring.
Does the Apex have Ground Balancing...? Different Grounds have different chemicals and minerals.... when you go from a Beach to graded Earth ya need to Ground Balance the machine again....?
I LOVE metal detecting
that's why you don't use discriminate
It isn’t discriminate the reason to eliminate annoying iron from the good stuff?
@@exploringwithnug yes but it also will remove the good stuff if there’s an iron target near it
What type would you recommend?
Maybe if you slowed the sweeping down a bit?
Love atpro minelab equinox
Jeremy move slowly between metals it got a
Five seconds switch from metals to metals it not just your detector that does that all digital detectors do that now the old one didn't do that because they detect Faris and non-fairs the new digital detectors detect Faris and non-fairs and density so you have to move it slower but you save time by know the metals before you dig them up.read the manual that is why it came with the detector.
I also had coil problems on a new detector, try a new coil
Garett apex work same as minelab 600 but one goes to 20 600 goes to 15 khz but my at pro with 13 inch can find small targets with after market coil think these change frequently a bit or cover more ground
You should ask Nuggetnoggin
Jeremy you should reach out to Garrett I think your unit needs calibration.
It is not consistent and fluctuates way to much.
Did you get batteries from Britain? Just Kidding .
Reach out they probably replace yours or something.
Dale Nickel Janesville Wisconsin
Looks like fun but the metal detector has issues
Did you ground balance on your target by mistake?
I was going to comment but the people that have and are obviously experienced have said it all. You should just go and gain a little experience yourself. Have a great day!!
My detector tells me how deep and whether it's coin or beer tab, aluminum
A friend of mine got one they are garbage.He also got the interchangable transponder for under water,all junk.
I think I'll stick with my tried and trusty AT Pro.
They work great on a sandy beach,thats about it.
Hi Jeremy who are you with metal detecting
Contact Garrett and tell them what’s going on. They should back up their product and either repair or replace it.
Did you factory reset if the answer is no try it and it will work properly
I hear Minelab is the best of the best…I was considering A Garrett but now I am not sure…
I’m eyeballing a mine lab myself
Just a thought , maybe you should turn off disc .
Hi Jeremy
👋
Hate your detector was being stupid. Enjoyed the video anyway. If you get a better one. Will you do a few videos of digging? Take care. Stay safe.
Haha garrett is stuck in 1999 !
Hey Jeremy
I say take it back and let them know about they're product, see you later nug
If u find it dont u gotta give it back to the land owner
Watching this video since husband was talking about getting a metal detector.
We need out in the water, looking for Lost Loved Ones. I'm sure you need a mental break from that.
I don't trust mental detector - good luck
Too much junk out there.
Good ad for that brand.
I agree with you brother I have the same one I have to ground balance it every 20 minutes I think it's a piece of shit I'm taking my back
According to all the other detector channels the apex is suppose to be the best. Do you have it set right? Hmm interesting.
Maybe you got it a dud it happens maybe the equipment is faulty send it back with the video let me give you a new one maybe it has a default I don't know I've heard good things but I bought one for 20 bucks with a kid and I didn't know what I was doing I was not happy either but technology is not my friend. But I did love the video go back in the water buddy
No Nuggies might have to go and get some KFC nuggets!!
NUG❤️
Because of the economic crisis and the rate of unemployment, now is the best time to invest and make money 💯
@Mateus Correia After I came across Bitcoin trading platform of Mr Brooks Walker, my financial life has totally changed
Wow, it feel so relaxing to see my broker talked about here, thought I'm the only one that knows Brooks Walker, I guess he's good works speaks for him now, he has build a good legacy for himself
for me Crypto trading is the best investment anyone could get into. As it could make you rich in a blink of an eye, A big shout out to Mr Brooks 🙌
How can reach out to this Mr Brooks? I urgently need his management on my INVESTMENTS!
@Pìnned by Lark Davis thank alot for this, I just message him now and he is guiding me on how to get started!
❤❤❤❤❤ ❤❤❤❤
Go check out metal detecting NYC
He knows his stuff,,and he rates them,,,,
Iron will screw with the signals. You should use it all metal mode. You need to learn the metal detector before you go bashing it.
Goes to show Dig Everything 👍 Check out Stealth Diggers/ Not Thursday. You might talk to him about your Detector see what he says about the settings. Just a thought 😎
Sorry, your test was not well done at all. First, you admitted you "might be doing something wrong" - you didn't show us your settings. Second, show a detector that would show that quarter next to that giant piece of iron you had.
Garrett cannot see through iron.
Interestin thanks. jeremy