Xentry установил по прошлому видео, всё работает на отлично. Windows 10 авто w211 2006 г. rest Так, что всё в порядке. Видео на 1000$. Спасибо, что делишься информацией!
Thanks to your assistance I have used the Open Port 2.0 for more than 3 years in the w164 ML. I have now switched to a w166 ML and I can read the fault codes and erase but for some reason I cannot access the CDI module, it says communication unavailable. Have you got the Open Port 2.0 to fully work on a w166?
Hello, with this setup (Xentry + Openport 2.0) Do I need to take some precautions? What are the "Good practices" for protecting the car? Ground connections? ESD discharge? Thanks
@@rbrood267 everything is pretty smooth. Nothing to worry about honestly. I’ve been using my openport setup for quite a while now. Only thing I’d advise is to keep the car on a battery maintainer so that the voltage doesn’t dip into a low voltage. This is important, ESPECIALLY when you get to the part where you want to send the changes you’ve made back to the cars ecus. Not doing this might lead to bricking the module you’re coding. Besides that, everything is pretty straight forward. Good luck
@@ooooooo6038 im installing xentry right now. didnt know its asking for so much space however. ill keep in mind the voltge drop or i run the car. i do have a brand spanking new battery though but bricking isnt something you want to experience. is there anything else to look out for? Keygen diffucult?
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html Xentry need I SUPPORT ▶ 3
i saw your video and ordered openport from the link below, installed xentry 9.2020 xdos, i have a question does openport work with all xentry versions or only with passthrou
@@AmazingRoad ok i have installed the passtru 2020 version installed the openport driver it is still giving the same error while connecting with das " initialization of diagnosis multiplexer failed" error code (1.2-2)and the lights on the openport are also not blinking and static, can you please guide
Would I. theory, I seen the sl230 slk230 r170 on the list when you searched for your car. would I be able to disable and enable permanently a bypass valve ? and or supercharger clutch pulley. remove error codes?
Nice video. Do you know why I'm having troubles to access my w209 270cdi engine ecu? I can't read/clear codes. On the full modules check, engine (and some others) have a "i" which it means it couldn't connect. Is this a interface problem (openport) or rather a xentry (installation) problem? Thanks in advance.
I had the unhappy idea of reinstalling xentry and now I'm not able to. No connection to daimler backend in the config assist. Any hint? Thanks in advance
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html Xentry need I SUPPORT ▶ 3 /// Xentry + Vediamo need I SUPPORT ▶ 4
@@stefankavaldjiev7079 I send program as a gift only by sponsor I Support ❤❤ and above. Thank you About sponsorship ua-cam.com/video/Rz8ijT3GXEg/v-deo.html
Привет. Программы отправляю как подарок только СПОНСОРАМ моего канала. Спасибо Посмотрите ВИДЕО про спонсорство ua-cam.com/video/-_ZZFBMXo-I/v-deo.html Первый месяц Xentry нужен I SUPPORT ▶▶▶ 3 /// Первый месяц Xentry + Vediamo нужен I SUPPORT ▶▶▶▶ 4 /// Второй месяц WIS/EPC нужен I SUPPORT ▶▶▶ 3 /// Третий месяц DTS Monaco нужен I SUPPORT ▶▶▶ 3 /// Четвертый месяц StarFinder нужен I SUPPORT ▶▶▶ 3 /// Второй месяц SEED KEY + WIS/EPC нужен I SUPPORT ▶▶▶▶ 4 /// Получить сразу 3 программы Xentry + Vediamo + WIS/EPC (Или программа на ваш выбор) нужен I SUPPORT ▶▶▶▶▶ 5
I have one of these devices and loaded OpenPort 2.0 drivers. The device is recognised by Windows. But Xentry Pass Through doesn't read my ECU? What can I try? Where would I see it in Xentry?
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you 🙏 Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html First month Xentry need I SUPPORT ▶▶▶ 3 /// First month Xentry + Vediamo need I SUPPORT ▶▶▶▶ 4 /// Second month WIS/EPC need I SUPPORT ▶▶▶ 3 /// Third month DTS Monaco need I SUPPORT ▶▶▶ 3 /// Fourth month StarFinder need I SUPPORT ▶▶▶ 3 /// Second month SEED KEY + WIS/EPC need I SUPPORT I SUPPORT ▶▶▶▶ 4 /// Get 3 programs at once Xentry + Vediamo + (WIS/EPC Or a program of your choice) need I SUPPORT ▶▶▶▶▶ 5
Please download from the Internet. Links to programs are available only to sponsors I Support ❤❤ and higher. thank ua-cam.com/video/zPha-2OW92c/v-deo.html ua-cam.com/video/45-GmLB7-l4/v-deo.html
@@AmazingRoad Привет. Получил я девайс. Вот только где скачать драйвер не нашёл. По другим ссылкам искать? Сейчас пытался найти драйвер и попадаются разные. Не раз на разные машины устанавливал различные программы. А тут не понятно где найти драйвер. В кой распаковке он будит и так далее. За видео спасибо! Остаётся найти драйвер в инете.
@@AmazingRoad i have seen them on alieexpres. So they work 100% with the software. I cam buy a c4 multiplexer tool. This is €445 euro's with shipment. And this tool is €25 max. Big difference.
Hello, can i do a softwareupdate with the tactrix and openport 2.0 on my digital cluster w205 2019 facelift i need the new cluster software to activate the amg supersport menu. Thank you
I have tried to use the Openport 2.0 clone you have shown. When I open DAS it begins to connect and before it finishes the software beeps and reads 0volts then disconnects. Voltage is fine (12.4v) before this happens. I have also tried while car is running with the same result. Is the Openport adapter faulty? I have installed latest drivers.
Благодарю за видео. Устанавливал кабель j2534 от Тойоты на Windows 10 но не особо он устанавливается,(там проблема с драйвером что ему нужен новый а его нет) Хочу попробовать на опен порт Сработает ли этот кабель open port для Мерседеса w639?
I bought plug from your link but i cant connect to my 215 and 216 later i try with 212. My plug could be broken or i do something wrong. Xentry on start ask me to chose device but xentry cant connect
@@AmazingRoad I try my 12.2020 with w212 and works well but its use xentry to connect and on my 2008 w216 program goes to das and wont connect any chanse that 2021 ver will work?
Great video! I successfully installed Xentry and MVCI from your other video, but cannot access some modules in my W211 E55 . Does openport allow access to all modules or just more? Thanks!
ok i have installed the passtru 2020 version installed the openport driver it is still giving the same error while connecting with das " initialization of diagnosis multiplexer failed" error code (1.2-2)and the lights on the openport are also not blinking and static, can you please guide
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you Watch the sponsorship VIDEO ua-cam.com/video/-_ZZFBMXo-I/v-deo.html First month Xentry need I SUPPORT ▶▶▶ 3 /// First month Xentry + Vediamo need I SUPPORT ▶▶▶▶ 4 /// Second month WIS/EPC need I SUPPORT ▶▶▶ 3 /// Third month DTS Monaco need I SUPPORT ▶▶▶ 3 /// Fourth month StarFinder need I SUPPORT ▶▶▶ 3 /// Second month SEED KEY + WIS/EPC need I SUPPORT I SUPPORT ▶▶▶▶ 4 /// Get 3 programs at once Xentry + Vediamo + WIS/EPC (Or a program of your choice) need I SUPPORT ▶▶▶▶▶ 5
hi, do these work with computers that were connected on internet before? some seller descriptions say (before attaching this device to computer) if the computer had been connected on internet ever before, it wont work. is this true?
Hello, thank you for your video and especially for your subtitlings, did you tested Openport on most Mercedes cars, is there limitations? Thanks a lot dear friend, and keeps going forward the nice work !
Привет, во первых спасибо вам огромное. У меня вопрос, для W251 2009 года какую программу xentry установить на Windows 10 и что лучше опенпорт 2.0 и j2534. Спасибо огромное
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html First month Xentry need I SUPPORT ▶ 3 /// First month Xentry + Vediamo need I SUPPORT ▶ 4
Установка и Активация Mercedes-Benz Xentry DAS PassThru 2021 для J2354 Опенпорт - ua-cam.com/video/HjTyvhWJz2o/v-deo.html Правильная Активация DAS Offline Программирование на Mercedes DAS Xentry Все Версии - ua-cam.com/video/nd8-oiHP79A/v-deo.html Установка и Активация Mercedes EPC / WIS/ASRA Последняя Версия - ua-cam.com/video/92-cgGCW9ZM/v-deo.html Установка и Активация Только Mercedes Benz WIS/ASRA 2020 - ua-cam.com/video/huMw2O_7eCk/v-deo.html Установка и Активация Mercedes-Benz MB Star Xentry 2020.12 PassThru Final - ua-cam.com/video/thshMoWu0Z4/v-deo.html Установка и Активация Mercedes-Benz MB Star Xentry 2020.03 PassThr - ua-cam.com/video/xk4dCH97ky4/v-deo.html Установка и Активация Mercedes-Benz MB Star Xentry 2018 PassThru - ua-cam.com/video/GLwqFI8NJzA/v-deo.html Установка и Активация Mercedes-Benz MB Star Xentry 2016 PassThru - ua-cam.com/video/N7-m8Ul7v-c/v-deo.html Mercedes DTS Monaco Установка и Активация + Patcher - ua-cam.com/video/_VdoRwWIlXs/v-deo.html Mercedes DTS Monaco V8.14 Настройка Для Работы с Openport 2.0 - ua-cam.com/video/MmbQ8NBHrfo/v-deo.html Установка и Активация Vediamo для Openport2 + Полная CBF База - ua-cam.com/video/PJHrQ_gWUAU/v-deo.html Установка и Активация Vediamo для Mini Vci + Полная CBF База - ua-cam.com/video/45-GmLB7-l4/v-deo.html Расчёт Ключа SEED KEY Calculator для Доступа к ECU Mercedes - ua-cam.com/video/9gsuqkiju48/v-deo.html
Друзья, кто-то может подсказать- Если устанавливаю драйвер для кабеля minivci на Windows 10 не проходит ему нужна виндовс 7 или хр. И с другой стороны когда пытаюсь установит xentry на старый виндовс она не ставится выдает ошибку что .net ,нужно обновлять а такое обновление уже идёт только с Виндоус 10.благодарю за ответ
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html First month Xentry need I SUPPORT ▶▶▶ 3 /// First month Xentry + Vediamo need I SUPPORT ▶▶▶▶ 4
Привет. Программы отправляю как подарок только СПОНСОРАМ моего канала. Спасибо Посмотрите ВИДЕО про спонсорство ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html Первый месяц Xentry нужен I SUPPORT ▶▶▶ 3 /// Первый месяц Xentry + Vediamo нужен I SUPPORT ▶▶▶▶ 4
Добрый день Можете поделиться ссылкой на скачиваение, под видео не нашёл ссылку. Сразу архив, а то в интернете много разного и не знаешь что скачивать, спасибо
Xentry установил по прошлому видео, всё работает на отлично. Windows 10 авто w211 2006 г. rest Так, что всё в порядке. Видео на 1000$. Спасибо, что делишься информацией!
И Вам спасибо
Dmitri jaan a kod gde vzyal ???
Artur Ghazaryan Videon taza kanenq noric cuic ktanq
mersi shAaat
Кокая винда нужна ?
Installation & Activation Mercedes-Benz Xentry DAS PassThru 2021 for J2354 Devices - ua-cam.com/video/HjTyvhWJz2o/v-deo.html
Correct Activation DAS Offline Programming on Mercedes DAS Xentry All Versions - ua-cam.com/video/nd8-oiHP79A/v-deo.html
Installation & Activation Mercedes EPC / WIS/ASRA Latest Version - ua-cam.com/video/92-cgGCW9ZM/v-deo.html
Installation & Activation only Mercedes Benz WIS/ASRA 2020 Full Version - ua-cam.com/video/huMw2O_7eCk/v-deo.html
Installation & Activation Mercedes-Benz MB Star Xentry 2020.12 PassThru Final - ua-cam.com/video/thshMoWu0Z4/v-deo.html
Installation & Activation Mercedes-Benz MB Star Xentry 2020.03 PassThru - ua-cam.com/video/xk4dCH97ky4/v-deo.html
Installation & Activation Mercedes MB Star Xentry 2018 PassThru - ua-cam.com/video/GLwqFI8NJzA/v-deo.html
Installation & Activation Mercedes MB Star Xentry 2016 PassThru - ua-cam.com/video/N7-m8Ul7v-c/v-deo.html
Mercedes DTS Monaco Installation & Activation + Patcher - ua-cam.com/video/_VdoRwWIlXs/v-deo.html
Mercedes DTS Monaco V8.14 Setting to Work With Openport 2.0 - ua-cam.com/video/MmbQ8NBHrfo/v-deo.html
Installation & Activation Vediamo for Openport2 + Full CBF Database - ua-cam.com/video/PJHrQ_gWUAU/v-deo.html
Installation & Activation Vediamo for Mini Vci + Full CBF Database - ua-cam.com/video/45-GmLB7-l4/v-deo.html
Encoding Agility mode on automatic transmission 722.9 - 7G / CBF VGSNAG2 - VGS3_0401 -
ua-cam.com/video/vyeREP8QIuA/v-deo.html
Encoding Agility mode on automatic transmission 722.9 - 7G / CBF VGSNAG2 - VGS3_0402 -
ua-cam.com/video/7-as2iWugik/v-deo.html
Encoding Agility mode on automatic transmission 722.9 - 7G / CBF VGSNAG2 - VGS3_0403 - ua-cam.com/video/0wdGLv3hfjk/v-deo.html
Encoding Agility mode on automatic transmission 722.9 - 7G+ / CBF VGS4NAG2 - VGS40 - ua-cam.com/video/aQDSMOoNUGQ/v-deo.html
Encoding Agility mode on automatic transmission 722.6 - 5G / CBF EGS53 - ua-cam.com/video/sYVR1RfiZDQ/v-deo.html
Encoding Agility mode on automatic transmission 722.6 - 5G / CBF EGS52 - ua-cam.com/video/y0lp9aJ25tc/v-deo.html
Mercedes ECU Unlock on SEED KEY Calculator - ua-cam.com/video/9gsuqkiju48/v-deo.html
.
@@AmazingRoad hi Friend. I have the openport 2.0. Are the drivers for it on the cd's? Or did you download oem drivers for it?
@@at0ny There are no disks. You have to download
@@AmazingRoad i have downloaded them from the official website thanks.
@@at0ny 👍
Activation & Full Installation Xentry Diagnostics (DAS Xentry) ua-cam.com/video/66uruZck4jM/v-deo.html
Tactrix Openport 2,0 ECU - ali.pub/4kxde8
Активация и Полная Установка Xentry Diagnostics (DAS Xentry) ua-cam.com/video/66uruZck4jM/v-deo.html
Tactrix Openport 2,0 ECU - ali.pub/4kxde8
.
здравствуйте, я купил эту коробку для своего Мерседес Виано, и она не работает. это указывает на проблему связи с мультиплексором.
Молодцы,Парни ! Это просто огромый подарок ,для Всех ! Спасибо !
И Вам спасибо
are you famous or something, i see your videos everywhere? are you like a mercedes superstar guy?
Xentry 2020 Final ua-cam.com/video/thshMoWu0Z4/v-deo.html
Большое уважение за твое терпение и понимание!!! Очень жду видео по установке!
Спасибо
Hi thank you but i coulfnt find the i stall link may you share with me
Спасибо. Час долбался с дровами, пока не посмотрел видео.
И потом за 2 мин установил.
👍👍
Спасибо большое Вам за вашу работу. Очень сильно помогаете людям.
Does Openport connect with Comand NTG1 Navi with Xentry Passthrough? To unlock DVD playing then driving?
Thanks to your assistance I have used the Open Port 2.0 for more than 3 years in the w164 ML. I have now switched to a w166 ML and I can read the fault codes and erase but for some reason I cannot access the CDI module, it says communication unavailable. Have you got the Open Port 2.0 to fully work on a w166?
There are 3 versions of openport 2.0 from the link in the description. Which one do I buy? Black, Golden A, Golden B
Gold A or Gold B
You choose golden A
@@uchoalantv4434
Love this type of content!👍👍
👍👍
So I have to buy both cables for it to work
Hello, with this setup (Xentry + Openport 2.0) Do I need to take some precautions? What are the "Good practices" for protecting the car? Ground connections? ESD discharge? Thanks
Thinking about doing it right now as my openport is coming in the mail, Is there any precautions that you’ve taken for protection?
how did it go?
@@ooooooo6038 how did it go?
@@rbrood267 everything is pretty smooth. Nothing to worry about honestly. I’ve been using my openport setup for quite a while now. Only thing I’d advise is to keep the car on a battery maintainer so that the voltage doesn’t dip into a low voltage. This is important, ESPECIALLY when you get to the part where you want to send the changes you’ve made back to the cars ecus. Not doing this might lead to bricking the module you’re coding. Besides that, everything is pretty straight forward. Good luck
@@ooooooo6038 im installing xentry right now. didnt know its asking for so much space however. ill keep in mind the voltge drop or i run the car. i do have a brand spanking new battery though but bricking isnt something you want to experience.
is there anything else to look out for? Keygen diffucult?
Hi thx for the Video, After install openport interface and runing xentry does he always ask beforehand which obd one would like to have?
Thx
Just one time
There ua-cam.com/video/vfo1OqpmKSw/v-deo.html
Спасибо, only one question I can see in this video(3´03´´) that this software is not validate for mercedes e200 (w211) It is correct?
validate
ua-cam.com/video/yqbAFSvLaIk/v-deo.html
What can be coded on W164 (xentry,vediamo)?
Lots, look at the channel. playlist
After to install Driver, you can started to connect with dts, like in you Video before?
.... Create New interface....
Hi, do we need to modifify openport2 (soldering new resistors)? Or does it work out of the box for xentry ? thank you
work
2020 ua-cam.com/video/vfo1OqpmKSw/v-deo.html
@@AmazingRoad thank you very much
@@sebmortel
one question please.
does it support or work with w211 production year 2002?
No
So i should not the drivers from the cd like the seller says? I should use driver that you told us?
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you
Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html
Xentry need I SUPPORT ▶ 3
Hey is this the Driver from tactrix Homepage?
i saw your video and ordered openport from the link below, installed xentry 9.2020 xdos, i have a question does openport work with all xentry versions or only with passthrou
PassThru
@@AmazingRoad ok i have installed the passtru 2020 version installed the openport driver it is still giving the same error while connecting with das " initialization of diagnosis multiplexer failed" error code (1.2-2)and the lights on the openport are also not blinking and static, can you please guide
Djaaan 🔥🔥🔥 lavner videon 👍🏻
👍🏼👍🏼👍🏼
Would I. theory, I seen the sl230 slk230 r170 on the list when you searched for your car. would I be able to disable and enable permanently a bypass valve ? and or supercharger clutch pulley. remove error codes?
I can't say for sure, I haven't tried it on slk230
@@AmazingRoad is that program allow you to work with all of the cars on that list or did you specifically order the software for the single car
The program works with all cars from the list
Добрый вечер !Мерседес 213/167/223 20-23 опен порт будет читать? все блоки с ксентри можно на этих авто работать?
На новых нужен сертификаты
Вот это W213 2017 ua-cam.com/video/bvY0VGDQ_xw/v-deo.html
is a "Openport 2.0" the same as a "Multiplexer MB star C4" ?
Yes. Xentry 2020 ua-cam.com/video/xk4dCH97ky4/v-deo.html
For example ua-cam.com/video/5UQkxgx-xxA/v-deo.html
Nice video. Do you know why I'm having troubles to access my w209 270cdi engine ecu? I can't read/clear codes. On the full modules check, engine (and some others) have a "i" which it means it couldn't connect. Is this a interface problem (openport) or rather a xentry (installation) problem? Thanks in advance.
Most likely from the scanner.
@@AmazingRoad Any way of confirm that? I bought it using the link in the description. Thanks
@@MarcoRibeiroPlus What gov car and what version of Xentry?
@@AmazingRoad Gov car? I'm using xentry 12.2020 (28.9.2.3)
I had the unhappy idea of reinstalling xentry and now I'm not able to. No connection to daimler backend in the config assist. Any hint? Thanks in advance
Добрый день! Скажите а этот адаптер можно в грузовой мерс подключать?
Здравствуйте. Проблем с опенпортом не было? Что лучше опенпорт, сканматик 2 про или стар с5? Или все оно одинаково?
Проблем не когда не было, но я купил VXdiag и удобнее и читает то что не может опенпорт. Но дорого
@@AmazingRoad что можете сказать про vxdiag allscaner?
Hi, will this cable work on a Mercedes CLK W209 2006 3.2 CDI?
Yes
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you
Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html
Xentry need I SUPPORT ▶ 3 /// Xentry + Vediamo need I SUPPORT ▶ 4
Hi, can i ask you some questions about tactrix and xentry?
can i use it offline ? and free? is it working only for ecu controller or it is working free offline for all mb controllers ?
is it windows 7 compatible?
@@stefankavaldjiev7079 For Windows 7 need 2016 or 2018. 2021 only Windows 10
@@stefankavaldjiev7079 The rest of the questions are on the channel, watch a few videos
@@stefankavaldjiev7079 I send program as a gift only by sponsor I Support ❤❤ and above. Thank you
About sponsorship ua-cam.com/video/Rz8ijT3GXEg/v-deo.html
Is it possible to run xentry C3 with openport
I have all old cars and the C3 multiplexer and cables are just too big to manage
No
Email me amazingroad@mail.ru Indicating your NICKNAME on UA-cam and what program you need
Привет. Программы отправляю как подарок только СПОНСОРАМ моего канала. Спасибо
Посмотрите ВИДЕО про спонсорство ua-cam.com/video/-_ZZFBMXo-I/v-deo.html
Первый месяц Xentry нужен I SUPPORT ▶▶▶ 3 /// Первый месяц Xentry + Vediamo нужен I SUPPORT ▶▶▶▶ 4 /// Второй месяц WIS/EPC нужен I SUPPORT ▶▶▶ 3 /// Третий месяц DTS Monaco нужен I SUPPORT ▶▶▶ 3 /// Четвертый месяц StarFinder нужен I SUPPORT ▶▶▶ 3 /// Второй месяц SEED KEY + WIS/EPC нужен I SUPPORT ▶▶▶▶ 4 /// Получить сразу 3 программы Xentry + Vediamo + WIS/EPC (Или программа на ваш выбор) нужен I SUPPORT ▶▶▶▶▶ 5
hallo why im cant chouse openport 2:25 i dnt have this my openport cant work you can helps? thanks
Здравствуйте.Подскажите какой именно брать , есть например golden a, он подойдёт?
Только Golden и там есть А и Б. Это уже зависит от длины кабеля
ua-cam.com/video/xk4dCH97ky4/v-deo.html
ua-cam.com/video/y0lp9aJ25tc/v-deo.html
Спасибо вам , отличный канал!
Good video friend that version of xentry incompatible with the mini vci .. could you help me thanks
Don't have an openport? Buy oprnport link in descriptions
I have one of these devices and loaded OpenPort 2.0 drivers. The device is recognised by Windows. But Xentry Pass Through doesn't read my ECU? What can I try? Where would I see it in Xentry?
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you 🙏
Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html
First month Xentry need I SUPPORT ▶▶▶ 3 /// First month Xentry + Vediamo need I SUPPORT ▶▶▶▶ 4 /// Second month WIS/EPC need I SUPPORT ▶▶▶ 3 /// Third month DTS Monaco need I SUPPORT ▶▶▶ 3 /// Fourth month StarFinder need I SUPPORT ▶▶▶ 3 /// Second month SEED KEY + WIS/EPC need I SUPPORT I SUPPORT ▶▶▶▶ 4 /// Get 3 programs at once Xentry + Vediamo + (WIS/EPC Or a program of your choice) need I SUPPORT ▶▶▶▶▶ 5
Очень ждал это видео,огромное спасибо
И Вам спасибо
Where's the link to the Tactrix openport driver? Thanks
I send the driver with the program
Hi,
Great video. You said that the driver was on the description section "Driver For OpenPort2". I cannot find it?
Please download from the Internet. Links to programs are available only to sponsors I Support ❤❤ and higher. thank
ua-cam.com/video/zPha-2OW92c/v-deo.html
ua-cam.com/video/45-GmLB7-l4/v-deo.html
Is there a link to install the drivers for the openport? I bought Tactrix the one using your link but my laptop does not take disc.
Email me amazingroad@mail.ru Indicating what program you need
Привет! Недавно приобрёл W213 подскажи какую версию А или В надо покупать Tactrix Openport 2,0 и какая разница?
По этому Мерсу пока не в теме.
Gold A или B нет разницы
@@AmazingRoad Привет. Получил я девайс.
Вот только где скачать драйвер не нашёл.
По другим ссылкам искать?
Сейчас пытался найти драйвер и попадаются разные.
Не раз на разные машины устанавливал различные программы.
А тут не понятно где найти драйвер.
В кой распаковке он будит и так далее.
За видео спасибо! Остаётся найти драйвер в инете.
Какой именно диск(в комплекте три диска) загружать в ноут чтоб загрузить драйвер ?
Дикси Вам не нужны
@@AmazingRoad Где тогда скачать драйвер ?
@@mishauncle2114 В интернете
@@mishauncle2114 Вот новая версия ua-cam.com/video/h7C6j92qym0/v-deo.html
подскажите Openport 2.0 SBC блок читает? нужно узнать давление в ресивере, количество срабатываний, активация деактивация sbc.
В основном нет, но есть что пишут что читал
@@AmazingRoad адаптеры Thinkdiag или Idiag прочитают SBC? спасибо большое за ответ)
Да у меня есть видео
Деактивировал SBC
ua-cam.com/video/TlB8BshynFQ/v-deo.html
can you make video for tactrix openport 2.0 for VAG cars?
So with this tool you dant have to use the extensive mb star c4 or c5 multiplexer?
With this tool, you no longer need c4 or c5 multiplexer. Here's a video watch ua-cam.com/video/YJQXJ68cPOE/v-deo.html
ua-cam.com/video/y0lp9aJ25tc/v-deo.html
2020 ua-cam.com/video/xk4dCH97ky4/v-deo.html
Vediamo ua-cam.com/video/PJHrQ_gWUAU/v-deo.html
@@AmazingRoad i have seen them on alieexpres. So they work 100% with the software. I cam buy a c4 multiplexer tool. This is €445 euro's with shipment. And this tool is €25 max. Big difference.
Excellent job, big up!
2021 ua-cam.com/video/oD_3Ow8MIlw/v-deo.html
hello, thank u for ur verly helpfuf tutorials, i drive myself w211 and love ur videos
hello, thank u for ur verly helpfuf tutorials, i drive myself w211 and love ur videos
Abgeschrotete Sägflinte
Круто! Большое спасибо за помощь!
Will the openport device you mentioned run with usb 3.0 or do i need usb 2.0
must work
Hello, can i do a softwareupdate with the tactrix and openport 2.0 on my digital cluster w205 2019 facelift i need the new cluster software to activate the amg supersport menu.
Thank you
No
@@AmazingRoad how i can do it?
@@mehmetm71 Need a calculator for AMG menu, it's expensive
@@AmazingRoad hmm and where can i get this or can you install ober remote the amg supersport menu?
Здравствуйте! Подскажите пожалуйста подойдёт ли Open port 2 для W210 E230?
Нет
I have tried to use the Openport 2.0 clone you have shown. When I open DAS it begins to connect and before it finishes the software beeps and reads 0volts then disconnects. Voltage is fine (12.4v) before this happens. I have also tried while car is running with the same result. Is the Openport adapter faulty? I have installed latest drivers.
Which car?
@@AmazingRoad W211 E55 2006, US spec
@@michaelbelcher6227 Should work without problems
Does this work with 2017 GLC 300 4MATIC (X253)?
I have not tried but I think yes
2021 ua-cam.com/video/oD_3Ow8MIlw/v-deo.html
Благодарю за видео. Устанавливал кабель j2534 от Тойоты на Windows 10 но не особо он устанавливается,(там проблема с драйвером что ему нужен новый а его нет)
Хочу попробовать на опен порт Сработает ли этот кабель open port для Мерседеса w639?
добрый день, какой из трёх вариантов Tactrix Openport 2,0 ECU надо брать?заранее спасибо
Gold два диска, диски вам не нужны
@@AmazingRoad спасибо!!!
Можно ли этим прибором продиагностировать ваз 2121? установил на авто LED фары и одно перестала работать. Куда подключить штекер в ваз2121?
Hello Brother i have a problem with the openport. I cant select it in tech2win (gm diagnostic,) i reinstalled drivers
I bought plug from your link but i cant connect to my 215 and 216 later i try with 212. My plug could be broken or i do something wrong. Xentry on start ask me to chose device but xentry cant connect
Install Xentry from this video ua-cam.com/video/HjTyvhWJz2o/v-deo.html
@@AmazingRoad I try my 12.2020 with w212 and works well but its use xentry to connect and on my 2008 w216 program goes to das and wont connect any chanse that 2021 ver will work?
Great video! I successfully installed Xentry and MVCI from your other video, but cannot access some modules in my W211 E55 . Does openport allow access to all modules or just more? Thanks!
Openport 2 sees more modules
Thanks!
@@AmazingRoad Are the better interfaces then Opeport 2.0, that find even more module?
@@rickydeldo8596 I don’t know yet
ok i have installed the passtru 2020 version installed the openport driver it is still giving the same error while connecting with das " initialization of diagnosis multiplexer failed" error code (1.2-2)and the lights on the openport are also not blinking and static, can you please guide
Do something wrong. There ua-cam.com/video/oD_3Ow8MIlw/v-deo.html
My OpenPort doesnt work with G500 W463... it can see the VIN, battery voltage but cannot communicate with the modules... why?
Same problème
Openport 2.0 работает с w211 на ME 2.8?
И нужна ли доработка о котором все говорят? Что то там перепаивают
ua-cam.com/video/e8jRWdwooK8/v-deo.html
Hi boss!! From which site you advise me to by Xentry and c4 ? Thanks regards
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you
Watch the sponsorship VIDEO ua-cam.com/video/-_ZZFBMXo-I/v-deo.html
First month Xentry need I SUPPORT ▶▶▶ 3 /// First month Xentry + Vediamo need I SUPPORT ▶▶▶▶ 4 /// Second month WIS/EPC need I SUPPORT ▶▶▶ 3 /// Third month DTS Monaco need I SUPPORT ▶▶▶ 3 /// Fourth month StarFinder need I SUPPORT ▶▶▶ 3 /// Second month SEED KEY + WIS/EPC need I SUPPORT I SUPPORT ▶▶▶▶ 4 /// Get 3 programs at once Xentry + Vediamo + WIS/EPC (Or a program of your choice) need I SUPPORT ▶▶▶▶▶ 5
Instead of C4 you can buy VXDIAG C6. look ua-cam.com/video/T8_5bZc-_PA/v-deo.html
I will send you programs.
Ok boss great , its VXDIAG coming with software? And its better than C4 can do offline and online Programming
Thanks regards
@@Abu.bassam81 Take it if you can C4, but this can also work in C6 mode
Openport2 work in MB c203 kompressor coupe sequentronic 2001 ?. Thanks.
I definitely can’t say because I didn’t try, but should work
Hello. I have Tactrix openport 2.0 for Xentry on my laptop. It's ok to use for scan online/with wifi active? Thanks a lot.
Hi
Does it go with MB W220 ?
got tactrix openport 2.0 and when connect to laptop with USB cable device show me 3 lights :red,orange and green flashing randomly.
Извини, а как заставить обычную xentry которая работает со star diag, работать с openport? Просто у меня есть обычная xentry и провод openport 2.0
.
@@AmazingRoad ?
@@mershaus ua-cam.com/video/HjTyvhWJz2o/v-deo.html
Great 👌 Think need to order this now!
👍👍👍
Is your car W212?
Did think it work for w212 as well my bad. Really love to have this thing.
@@MB212 what year? For restyling, we have not tested.
Ok! 2012 old model! Like to put eco not automatic and trunk close with key.
hi, do these work with computers that were connected on internet before? some seller descriptions say (before attaching this device to computer) if the computer had been connected on internet ever before, it wont work. is this true?
Yes, work
Email me amazingroad@mail.ru Indicating your NICKNAME on UA-cam and what program you need
Hello, thank you for your video and especially for your subtitlings, did you tested Openport on most Mercedes cars, is there limitations? Thanks a lot dear friend, and keeps going forward the nice work !
каккие предосторожности. можно ли взять последний драйвер с настоящего Тактрикс и.т.д.?
спасибо.
Привет, во первых спасибо вам огромное. У меня вопрос, для W251 2009 года какую программу xentry установить на Windows 10 и что лучше опенпорт 2.0 и j2534. Спасибо огромное
Можно ли с помощью этой Диагностики включать и выключать SBC для замены колодок на w211??
Нет. Кроме SBC. Но можно включить агилити ua-cam.com/video/LGP2xX5bxto/v-deo.html
I'm in Thailand, how much is this kit, where can I order it, thank you very much.
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you
Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html
First month Xentry need I SUPPORT ▶ 3 /// First month Xentry + Vediamo need I SUPPORT ▶ 4
Link to openport in the description under the video
Подскажите на w210 рестайл без obd2. Такой адаптер подойдет?
Точно не могу сказать, я не пробовал
Молодец! Спасибо за работу! Успехов!
2020 ua-cam.com/video/xk4dCH97ky4/v-deo.html
Установка и Активация Mercedes-Benz Xentry DAS PassThru 2021 для J2354 Опенпорт - ua-cam.com/video/HjTyvhWJz2o/v-deo.html
Правильная Активация DAS Offline Программирование на Mercedes DAS Xentry Все Версии - ua-cam.com/video/nd8-oiHP79A/v-deo.html
Установка и Активация Mercedes EPC / WIS/ASRA Последняя Версия - ua-cam.com/video/92-cgGCW9ZM/v-deo.html
Установка и Активация Только Mercedes Benz WIS/ASRA 2020 - ua-cam.com/video/huMw2O_7eCk/v-deo.html
Установка и Активация Mercedes-Benz MB Star Xentry 2020.12 PassThru Final - ua-cam.com/video/thshMoWu0Z4/v-deo.html
Установка и Активация Mercedes-Benz MB Star Xentry 2020.03 PassThr - ua-cam.com/video/xk4dCH97ky4/v-deo.html
Установка и Активация Mercedes-Benz MB Star Xentry 2018 PassThru - ua-cam.com/video/GLwqFI8NJzA/v-deo.html
Установка и Активация Mercedes-Benz MB Star Xentry 2016 PassThru - ua-cam.com/video/N7-m8Ul7v-c/v-deo.html
Mercedes DTS Monaco Установка и Активация + Patcher - ua-cam.com/video/_VdoRwWIlXs/v-deo.html
Mercedes DTS Monaco V8.14 Настройка Для Работы с Openport 2.0 - ua-cam.com/video/MmbQ8NBHrfo/v-deo.html
Установка и Активация Vediamo для Openport2 + Полная CBF База - ua-cam.com/video/PJHrQ_gWUAU/v-deo.html
Установка и Активация Vediamo для Mini Vci + Полная CBF База - ua-cam.com/video/45-GmLB7-l4/v-deo.html
Расчёт Ключа SEED KEY Calculator для Доступа к ECU Mercedes - ua-cam.com/video/9gsuqkiju48/v-deo.html
Hey sir,
Where do I get the drivers for my openport 2.0?
Email me amazingroadsponsors@mail.ru Indicating your NICKNAME on UA-cam
Where should I buy the openport 2.0? Thanks. I just subscribed!!
Link in descriptions under the video
@@AmazingRoad Thanks, I just purchased it.
@@H22a192accord
По вашей ссылке на Али можно выбрать 3 варианта ОпенПорт: черный и 2 золотых. Какой у вас?
Золотой без дисков, они не нужны
ua-cam.com/video/xohlU2cMaPE/v-deo.html
After i install everything with sucses I open xentry but it didn't come out page with ( SelectPtDevice ) of communication in OBD
The openport driver had to be installed in the middle of the video, as I show
Друзья, кто-то может подсказать-
Если устанавливаю драйвер для кабеля minivci на Windows 10 не проходит ему нужна виндовс 7 или хр.
И с другой стороны когда пытаюсь установит xentry на старый виндовс она не ставится выдает ошибку что .net ,нужно обновлять а такое обновление уже идёт только с Виндоус 10.благодарю за ответ
isk mi ban harcnem ... vor cragir ustanavic anem windos 10 vra kashxati te imast chka ????
kashxati baic kodi texadrely urish dzeva
isk vor xndrem
shat kaseq vonc anem et kodi dzev ???
@@boyov3 Es chem texadrum ynkersa texadrum, baic komentnerum grel en vor 10 i vra texadrel en. Mi hat iranc greq. Baic stabil meka 7 i vra e ashxatum
Hi! Will it work only with the Xentry program, or also work with DAS? Thank You!😄👌🏻
Das also
Hi. I send programs as a gift only to SPONSORS of my channel. Thank you
Watch the sponsorship VIDEO ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html
First month Xentry need I SUPPORT ▶▶▶ 3 /// First month Xentry + Vediamo need I SUPPORT ▶▶▶▶ 4
А на дисках с китая которые приходят с блочком драйверов нет?
Нет
Can you please Tell the difference between OpenPort and SD Connect? Can it do the Same?
For my 2014 car, it does the same as C4
With Openport 2.0 you can connect to the car without multiplexer?
Are you not my subscriber? More than 40 videos on this topic. There ua-cam.com/video/z4-I_NzKb9Y/v-deo.html
ua-cam.com/video/xk4dCH97ky4/v-deo.html
ua-cam.com/video/RU9qzoUqsp4/v-deo.html
Thanks but I don't think you understood my question. What I meant is do you need to have a multiplexer like C3 or C4 to run xentry/das?
I figured out the question. You haven't watched the video I gave you. No, you don't need c3 or c4. Works through openport
Возможно ли подключение к w163 ml320 1998гв? Видет он только напряжение сети 13вольт.
W164 2014гв он видит, а мой не хочет.
На 1998 нет, опенпорт не видит
ua-cam.com/video/HjTyvhWJz2o/v-deo.html
Он работает реально быстрее Стар Диагнизис С3.. он может всё то же что С 3 ? Или всё же не заменит полноценный мультиплексор?
Да работает быстро. У меня нет C3 чтобы сравнить но пока что все можно сделать через опенпорт 2
Hi can xentry be installed on external hard drive and could you do a teamviewer install for openport
Xentri ua-cam.com/video/zPha-2OW92c/v-deo.html Vediamo ua-cam.com/video/45-GmLB7-l4/v-deo.html
Классный видос сразу лайк.
Openport значит не дорабатовали? Вопрос такой : надо ли его дорабатывать для прог как xe""try или ved""mo?
Нет, и так все супер работает. Вот например видео ua-cam.com/video/YJQXJ68cPOE/v-deo.html
Или ua-cam.com/video/y0lp9aJ25tc/v-deo.html
Также через Xentry ua-cam.com/video/9Ltz1te3Qws/v-deo.html
Спасибо
Which drivers to use with this device?
Email me amazingroad@mail.ru Indicating your NICKNAME on UA-cam and what program you need
Kamran Samson
...Супер. Есть один вопросик? Га счёт инженерной меню xentry.
ua-cam.com/video/FYm1aNPTSMU/v-deo.html
ua-cam.com/video/N7-m8Ul7v-c/v-deo.html
Не нашел драйвер под видео? Спасибо за информацию.
И Вам спасибо
@@AmazingRoad я так и не понял, драйвер есть, я его не нашёл?
@@VladimirVK. Есть, ишите в интернете. Я отправляю в архиве с программой
does it works with a class a w168 with obd2??
I think so, you can try ua-cam.com/video/N7-m8Ul7v-c/v-deo.html
@@AmazingRoad it looks like openport and xentry does not work on W168, W414, W463 only engine diag(2004)
Я тоже заказал с Али дошло. Просто как устоновит откуда найти драйвера вопше как с ним работать немогу понять
Привет. Программы отправляю как подарок только СПОНСОРАМ моего канала. Спасибо
Посмотрите ВИДЕО про спонсорство ▶ ua-cam.com/video/-_ZZFBMXo-I/v-deo.html
Первый месяц Xentry нужен I SUPPORT ▶▶▶ 3 /// Первый месяц Xentry + Vediamo нужен I SUPPORT ▶▶▶▶ 4
Добрый день
Можете поделиться ссылкой на скачиваение, под видео не нашёл ссылку. Сразу архив, а то в интернете много разного и не знаешь что скачивать, спасибо
Напишите мне на amazingroad@mail.ru
Я написал тебе, apocalips
Hi, Can we connect vcds using openport 2.0 ???
ua-cam.com/video/cmAooGdwm3k/v-deo.html
When I go to the link to buy the openport there are three different ones witch one do I need?
Gold
I send links to programs as a gift only by sponsor I Support ❤❤ and above. Thank you
About sponsorship ua-cam.com/video/Rz8ijT3GXEg/v-deo.html