Don’t see mechanics like this anymore, truelly great content coming from this channel, I’m a mechanic also but I’m learning so much more through this channel!
About time you was on the box the wizard's back on form looking sexy that block an head love a clean job should of done a quick valve seal test with the plug in an bit of petrol to show a good seal an bad seal keep up the amazing work about time you you gave some free merch out its Christmas soon 🙄🙄🙄😃
Aaron, you are a truly talented guy! I am currently doing some work on my son's red 2002 SRi Turbo Z20LET.(does this remind you of anything?!) We have a fault whereby the cooling fans run all the time. I have checked the temp sensor and wiring/connections to the sensor and this intermittent fault is still there. A correct wiring diagram would really help. Any ideas where I might get one?
Top work,shame it all gets hidden but least you know it's been done correctly,you'll be driving it soon at this rate,will you go for a tune to check or you do that you're self?
Hi Arron what do you use to parts/valves and heads and blocks that clean brake cleaner is good but you take it to another level keep up the good vids dude.
Hi Aaron. Just a question, arnt camshaft bearing seats line bored to the head and caps? If so how do you successfully fit an aftrrmarket camshaft to a head that was line bored to the factory cams. Do you recommend having the head and cam caps line bored to the uprated shafts? Or is it the case now that tolerances are consistent enough to be able to make aftermarket cams fit a known line bored tolerance?
Every day is a school day when the genius is on the case. Aaron is a true legend in his workmanship and that is all you need to know....
I love it when Aaron drops all this knowledge.
Aaron's uploaded, get the note book out it's education time! Legend!! 👌
No long intro.....no music....no waffle.....no filler.... just straight into it explained clearly too.....
I always use a electric drill with a reverse to lap valves in its faster.
Don’t see mechanics like this anymore, truelly great content coming from this channel, I’m a mechanic also but I’m learning so much more through this channel!
most underrated youtuber
Sick video as always mate that engine looks mentally clean! 🤯 she’s gonna be absolute weapon when the rebuild is complete 💪🏻
its a shame it all gets hidden!
I Can't Wait To See This Car On the Road and All Finished Its Going To Be Proper MinT Great Video As allway's 👌👍
Surely Azz should have more subs let's all recomend to our m8s and get them subs up.
Think i just learnt more in this video than i did at college 😂
Although I'm English....this and all your vids are bad ass!
Just brilliant again Aaron 👍
Your channel is full of tech, keep it going.
Great video Aaron, always a pleasure to watch you work 👌😀
Attention to detail is👌 cracking job.
Absolutely amazing work so talented 😎
Ur a true crafts man and ur videos are all in depth keep up the hard work mate
Great Vid, can't wait to see it all complete.
I’ll be counting the days till the next vid mate! I’m
Hooked and want to see the beast pur!
Great Saturday night viewing, beats Strictly 👏😎👍
As always contents just getting better and better fella 👍👍
Learn something new everyday, loved it all especially about the valves.
I feel like going and buying some random 16v head just to do this!
do it! i love hearing stuff like that
Wicked vid again well done like the content got a bit of everything on the channel fair play
An excellent engine build
Fantastic video and information once again mate
About time you was on the box the wizard's back on form looking sexy that block an head love a clean job should of done a quick valve seal test with the plug in an bit of petrol to show a good seal an bad seal keep up the amazing work about time you you gave some free merch out its Christmas soon 🙄🙄🙄😃
Aaron seems Very knowledgeable 👍 great video Iv just Subscribed
Another cracking video! 👍🏻👌🏻
looking forward to the next one bud great work :)
Amazing work, always impressed with the detail
Top video!! Keep up the good work!!
Can't wait till it's finished nice job
Great video like always really like watching your videos that head looks so good now keep up the good work
Another belter Aaron 💪🏽💪🏽
can you do a vid showing how to properly set up a wastegate actuator
What a video big up 👊🏻
Wicked content 👍
Aaron, you are a truly talented guy! I am currently doing some work on my son's red 2002 SRi Turbo Z20LET.(does this remind you of anything?!) We have a fault whereby the cooling fans run all the time. I have checked the temp sensor and wiring/connections to the sensor and this intermittent fault is still there. A correct wiring diagram would really help. Any ideas where I might get one?
Video title changed from 700hp to 600hp? Accidental spoiler?? 🤔 Great video as always...
Detailed video as always 👍
Looking mint m8
Here she comes!
Is there anything this guy dont know 👍👍
Nice work.
Quality keep up the good wo4k
Top work,shame it all gets hidden but least you know it's been done correctly,you'll be driving it soon at this rate,will you go for a tune to check or you do that you're self?
Fancy doing this on a DE ? I'd love a full refresh on the Z and you're becoming the only guy id trust to do it :)
Great knowledge mate get a tripod so you can work and film
Another crackin video 👍🏼
Hi Arron what do you use to parts/valves and heads and blocks that clean brake cleaner is good but you take it to another level keep up the good vids dude.
killer vid mate as per
Love that accent mate...
Hi Aaron. Just a question, arnt camshaft bearing seats line bored to the head and caps? If so how do you successfully fit an aftrrmarket camshaft to a head that was line bored to the factory cams. Do you recommend having the head and cam caps line bored to the uprated shafts? Or is it the case now that tolerances are consistent enough to be able to make aftermarket cams fit a known line bored tolerance?
What did you use to clean the ports and head please and fantastic work mate
0:15 i think you need a new freezer mate. Looks like leatherfaces old freezer 🙂
Yes bro
Do I spot a random zlet exhaust stud between cylinder 1 & 2 😉
Great vid wombat but I would still like to see the escort rs turbo on the rollers is this ever going to happen?
Yes it will happen at some point
Azza do you do private work? Wouldn't mind you doing a turbo kit on my car if your interested. Thanks azza
Aaron :)
what spark plugs you use in the evo engine ?
What are Mnemonic valves? I thought they were in your heart?
@zeroyon223 thanks for that, I know nothing about evo engines, this has been a good vid to watch
Boom
If Carlsberg did mechanics........
I did not only smash the like, i smashed it's sister too. The double smash! :D
you sir are a legend
@@AaronUnknownPerformance I even used my gf's account. #BadAssDude :P
How do you know all this stuff
Aliens 👽