Twisted Hobbys/RC Factory - Crack Yak 55 - Build & Maiden Flight
Вставка
- Опубліковано 17 тра 2024
- Build process for the Twisted Hobbys - Crak Yak 55. (Also for the 32" Edge 540, Yak-55, Cap 10, Sbach, and Extra Slick) A how to assembly with tips and tricks!
Get your Crak Yak 55, Power Combo, and Transmitter here! www.twistedhobbys.com
Binding and ESC Calibration Video • Receiver Binding and E...
Building Supplies and Materials Video • Tools and Building Mat...
0:00 - Intro
0:53 - Fold over surfaces
1:00 - Radio bind/calibration
1:19 - Gluing horizontal fuselage
1:48 - Wing spar
2:52 - Lower vertical fuselage
3:13 - Fuselage stiffeners
3:49 - Servo horn extensions
5:37 - Aileron control horns
5:54 - Aileron pushrods
6:38 - Landing gear
7:51 - Elevator Pushrod
8:13 - Upper vertical fuselage
8:30 - Rudder
9:06 - Tail skid
9:25 - Rudder pushrod
9:42 - Motor mount
10:01 - Side force generators
10:17 - Electronics install
11:10 - Propeller balance and install
11:38 - CG adjustment
11:56 - Maiden flight - Розваги
This is much better than the manual I downloaded, it still had the old style landing gear. Thanks!
This is a lot of building for a $300 flat foamy. Thanks for the video though. It’s helpful and I’m still going to buy one.
OMG YES!! My FAVORITE TH PLANE OF ALL TIME!!!! This plane is my go-to around the house AND it goes on vacation with me/us EVERY YEAR!!!! I love it and people love watching me fly it at home AND on vacation!!! And, I use the Foam-Tac glue on ALL my TH foamie builds!!!!
I like your build videos. They're very helpful. More helpful than the manuals in many cases.
Glad to hear it!
Be sure your S2 knob on the TX16S Mkii is centered and not turned all the way down (CCW) when trying to test motor, otherwise motor will never turn. Learned this the hard way... :)
Awesome build vid bud 🔥🔥🔥
Glad you like it
Hey guys can you please do a build video for the 32 inch GEE BEE Z Foamy.
in due time
What adhesive are you using in the red and black bottle?
Red and sliver adhesive is called Jinqiang JQ-2118 Adhesive Glue here is a link for it. shorturl.at/yDUW5
Are the wheels supposed to spin freely like useable wheels, or did I just get some glue up in there to make them stiff
They should spin freely, sometimes it's a little tricky getting the first nut between the wheel and the pants support to tension against the pants support.