Anybody looking to do this on their 2nd Gen Mazda 3, please note you'll need spacers for the door's if they're deep. The window is now hitting the back of the speaker, make sure to roll them down for fitment notes and how much of a spacer, if you do need one, that you'll need. Happy Install!
You can tear apart the old speaker and use a jig saw to cut the middle stuff off, then use a sander or blade to cut the trim the top edges so it's all flat and bam you don't have to buy spacers.
@@elizabethcaron2970 If you use the old mount as a spacer by removing the middle section and the top edge, how do you connect the new speaker to the modified old factory mount?
Man, this is absolutely true. I put in an Alpine aftermarket radio and was about to do a speaker replacement, but tuning the radio right just made the stock speakers sound amazing. Didn't even upgrade the speakers.
Thanks, I love it! The left front speaker on my 2010 has some buzzing issues at times and I'm thinking of fixing what's likely loose screws or upgrading the speakers when the weather gets better. My only concern is that it didn't look like you drilled the hole larger and use a rubber grommet to protect the wires. I've seen too many things fail from wires getting cut by sharp hole edges.
That portion of wire won't move, and the fabric that is wrapped around the wires acts as a grommet. Nothing will be chopped, all open metal was also covered behind the camera for extra protection 🙂
I ain't tech savvy either and I got mine done too. In fact, I got an android radio installed on mine. It was a pain in the butt, but it is doable. Fyi: even if the speakers say that 6x8 is the same as the 5x7, buy them 5x7! The bigger one, the magnet gets in the way of the window. You will have to buy spacers🙄.
And here I am thinking, damn I should've watch this video first before trying to install my speakers on my Mazda 3 2010! Oh boy! You guys are taking too many parts out just to take that door panel out. Also, those 2 extra wires, I don't have them connected. They were previously connected to aftermarket tweeters which are no longer working. My speakers are working fine. Idk how but they are. I will eventually add new tweeters tho. Not hating, just giving advise, since I have had to take those door panels off like 10 times!🤣
Anybody looking to do this on their 2nd Gen Mazda 3, please note you'll need spacers for the door's if they're deep. The window is now hitting the back of the speaker, make sure to roll them down for fitment notes and how much of a spacer, if you do need one, that you'll need. Happy Install!
How do i know if I have a second gen? Mine is a 2010 2.5L hatch white just like the one from the vid. Oh, I just answered my question 😆
Hey i got a 2005 mazda 3 sedan fully stock, what speakers u suggest i throw in?
These work great 🙂
You can tear apart the old speaker and use a jig saw to cut the middle stuff off, then use a sander or blade to cut the trim the top edges so it's all flat and bam you don't have to buy spacers.
@@elizabethcaron2970 If you use the old mount as a spacer by removing the middle section and the top edge, how do you connect the new speaker to the modified old factory mount?
Why did this video make me cry 🥲😂
Was so much fun to chill again. I’ll be up to see you in your neck of the woods soon buddy!
Best video of 2021 ❤
Not going to lie, for some reason, them stock speakers bang if you tune your after market radio right. But yeah, I'm still swapping mine out
Man, this is absolutely true. I put in an Alpine aftermarket radio and was about to do a speaker replacement, but tuning the radio right just made the stock speakers sound amazing. Didn't even upgrade the speakers.
@@slamcrank how do I tune it right
I have a 2009 mazda 3 maxx sport and confused with what speakers will fit
Thanks, I love it! The left front speaker on my 2010 has some buzzing issues at times and I'm thinking of fixing what's likely loose screws or upgrading the speakers when the weather gets better.
My only concern is that it didn't look like you drilled the hole larger and use a rubber grommet to protect the wires. I've seen too many things fail from wires getting cut by sharp hole edges.
That portion of wire won't move, and the fabric that is wrapped around the wires acts as a grommet. Nothing will be chopped, all open metal was also covered behind the camera for extra protection 🙂
@@ColtonRichter Excellent!
Which wires are positive and negative? Front and rear speakers.
Black wire white stripe is normally your positive
@@ColtonRichter Ok. Four wires in front speakers. Which colors did you put together?
@@ColtonRichter I have Mazda 6 GH, but i think the wire colors are same.
Thanx boyzzzzzzzz 🔥🎶
🔊
The return of Samir
Oh ya bb
Croc Boi
Which wire is positive and negative
i think you'll find the rear speakers are running off the front (series wiring), hence the reason they use 2 wires
Love the Mazda vids💯
Thank you, sir!
Homie could you drop the link to the speakers?
bit.ly/3s1ajFB
This is gonna be a mission for me. I aint tech savvy. Guess I'll have to call some re-enforcments
Haha, get it!
I ain't tech savvy either and I got mine done too. In fact, I got an android radio installed on mine. It was a pain in the butt, but it is doable. Fyi: even if the speakers say that 6x8 is the same as the 5x7, buy them 5x7! The bigger one, the magnet gets in the way of the window. You will have to buy spacers🙄.
Hey bro, would the 6x9 speaker will fit to the 1st gen mazda 3?
No sir
Hey will 6x5 speakers work with custom spacers
Can I turbo a mazda 3 on stock engine??
Yep!
👍🏻
Samir is on stuff in this episode
He always is, he wears Crocs in the winter
@@ColtonRichter 😂, I couldn't
And here I am thinking, damn I should've watch this video first before trying to install my speakers on my Mazda 3 2010! Oh boy! You guys are taking too many parts out just to take that door panel out. Also, those 2 extra wires, I don't have them connected. They were previously connected to aftermarket tweeters which are no longer working. My speakers are working fine. Idk how but they are. I will eventually add new tweeters tho.
Not hating, just giving advise, since I have had to take those door panels off like 10 times!🤣
YoooooooooooooOoOooOoooOOoooOOoOooOoooOoooooOoooooOoooo
YOoooooOOOOO