Question: I have a 2011 Jetta TDI and ordered the kit from ya'll but have a different connection on my front doors from the purple connector in the video. Where can I connect the wires? Thanks!
Hello. I have a Golf 5 from 2003. On the front doors my windows regulator motors doesn't have the pins installed. On the driver side with part number 1K0959793C, only have the 19 pin. On passenger side with part number 1K0959792C, the 18 and 19 pin is not available. Is there other way to install the door warning lights without these pins?
what version of VCDS do i need for this install? i want to install footwell lights in my mk6 jetta as well, I'm gonna run LEDs and wire it to B50 in the CECM. if i can use VCDS lite for both of these projects then ill probably end up ordering this. please respond, can i use the lite version?
"Have a dealership code the module" LOL yeah right. Every dealer you mention coding to them and they start crying like babies. What about re-zip tying the wire back on that plug and also nice wire management that is not being used. BestBuy installers can do better.
thanks guys, you will definitely help make it easier than just pictures.
Question: I have a 2011 Jetta TDI and ordered the kit from ya'll but have a different connection on my front doors from the purple connector in the video. Where can I connect the wires? Thanks!
Thank you.
Today I'm going to try
Hey is it the same procedure for back door. Thanks
We do not have an instruction video for the passat, however the installation should be similar
Thank you did it to my scirocco all good 👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
If I do this my mirrors won’t go in and out anymore. So it removes that option and exchange it for the light.
The harnesses are no longer like this in the facelift MK6...I gave up. No 16/18 pin harness to use
Did you ever figure it out?
It's the same for the backdoors?
Hello.
I have a Golf 5 from 2003.
On the front doors my windows regulator motors doesn't have the pins installed.
On the driver side with part number 1K0959793C, only have the 19 pin.
On passenger side with part number 1K0959792C, the 18 and 19 pin is not available.
Is there other way to install the door warning lights without these pins?
Have you guys done interior door handle led? Pin 17 is live but I can't find a ground pin number
Can I do the same method if I install the ghost emblem led light where the vw logo display
Hi I did the coding on the puddle lights on a golf 6 gti but the alarm led doesn't work after coding.please help
It's the same procedure for a GTI MK7 2016?
Hi I have 2012 jetta are the same procedure to do it?thanks
Is there a instruction for 2013 Passat b7 ? Not sure if the pinout for rear door module is same as mk6
Hi, can we able to use Autel Autolink AL519 OBD-II/EOBD Code Reader to change the code?
Is the procedure the same for an MK7?
Can this be done on an VW Atlas?
what version of VCDS do i need for this install? i want to install footwell lights in my mk6 jetta as well, I'm gonna run LEDs and wire it to B50 in the CECM. if i can use VCDS lite for both of these projects then ill probably end up ordering this. please respond, can i use the lite version?
I'm not sure what VCDS lite entails, but test to see if you have access to the control module in the video. If you do, then you are good to go!
In the mk7 is the same?
Rear doors?
2009 model golf6 the coding
"Have a dealership code the module" LOL yeah right. Every dealer you mention coding to them and they start crying like babies.
What about re-zip tying the wire back on that plug and also nice wire management that is not being used. BestBuy installers can do better.