Thanks Much. I have a hydrualic hammer that will NOT cycle. It will hit, but I have to reverse pressure and apply back and forth to make it hit. Any ideas what this is?
@@accomplishedauto3815 It could be a nitrogen issue or seal issue or both. A new Nitrogen Bottle Setup was like $300 and a Seal Kit was $300. The factory dealer said they could replace seals and recharge with nitrogen for $500, but it's a 1000 mile round trip to take it there, wait and then come back. They did send me a shop manual on it. Just wondering If I should take the plunge to do it myself. I haven't got around to fixing it yet.
I one of the breaker exquater oppreat I do all this work but why fulling N2 glass in all breaker s what the work N2 glass please explain me +918886126769
.I fitted hydraulic hammer (furukawa fxj375 model ) with CAT 329dl excavator .But , hydraulic hose fittings getting leakage near breaker end . I tried , same result.Please I need advice to solve this issue
If it’s like the furukawa’s that I’ve worked on, it has an adapter that comes off the hammer that goes to a jic fitting. That adapter is held in with 4 bolts on each side and it has an o ring seal that goes down in the hammer body. If it has those adapters I would check the o rings on them. I’ve found those bolts working themselves loose and o ring failure there before
My name is Ashraf Shehab. First, there is no fatwa for them. It is wrong to work in the Jack Hammer. He is standing in front of the ground work. Thank you. I am working in this field for thirteen years and I am sorry for the delay. Thank you.
Really nice video!
Nice, we rebuild our Indeco 1000 in house. Save a lot of money.
Excellent video. Thank you very much for taking the time to do this.
Great video, too bad we didnt see how they change the tool bushings. Thank you!
extremely hello video. thank you for making this video. awesome
Excellent video thanks you very much
Thanks Much. I have a hydrualic hammer that will NOT cycle. It will hit, but I have to reverse pressure and apply back and forth to make it hit. Any ideas what this is?
KarasCyborg - Did you ever get an answer to this or find out what the problem is (was)?
@@accomplishedauto3815 It could be a nitrogen issue or seal issue or both. A new Nitrogen Bottle Setup was like $300 and a Seal Kit was $300. The factory dealer said they could replace seals and recharge with nitrogen for $500, but it's a 1000 mile round trip to take it there, wait and then come back. They did send me a shop manual on it. Just wondering If I should take the plunge to do it myself. I haven't got around to fixing it yet.
@@accomplishedauto3815 may I ask what brand of hammer you have?
Thank you for sharing
Thanks sir and I am India very nice video but if the sealing time was a little slow it would have been better
Tnx for uploading
Well explained
Excellent video, please make more videos.
thanks dear,
for giving a good video.
They must have very good heat treatment fomular after finishing forging.
why do you say that, what do you Mean?
I one of the breaker exquater oppreat I do all this work but why fulling N2 glass in all breaker s what the work N2 glass please explain me +918886126769
Hello sir, what is that tool that you use on polishing the inside of the cylinder and the piston?
نرجو طرح كيف عملية الحركه في الجاك همر وشكرن
.I fitted hydraulic hammer (furukawa fxj375 model ) with CAT 329dl excavator .But , hydraulic hose fittings getting leakage near breaker end . I tried , same result.Please I need advice to solve this issue
If it’s like the furukawa’s that I’ve worked on, it has an adapter that comes off the hammer that goes to a jic fitting. That adapter is held in with 4 bolts on each side and it has an o ring seal that goes down in the hammer body. If it has those adapters I would check the o rings on them. I’ve found those bolts working themselves loose and o ring failure there before
Nice videoz
good video, sangat membantu
well made.
Tnq sir
OK very good nice
Thanks sir
best
My name is Ashraf Shehab. First, there is no fatwa for them. It is wrong to work in the Jack Hammer. He is standing in front of the ground work. Thank you. I am working in this field for thirteen years and I am sorry for the delay. Thank you.
Se fosse no Brasil e chamado de ganbiarra..... Nem ar comprimido tem....
Você não entendeu foi nada kkkkk usa e nitrogênio e aplicou sim
من الداخل