You make it look so easy when you manipulate the wire and it goes just where you want it to go! I continue to struggle with this aspect. I’ll keep working on it! Thanks Kelly
It does take practice but I do edit and cut a lot of the video out to try and keep it short 😅 take it really slow, let the wires lead the way. Thanks for your lovely comment, really appreciated, have fun ❤️
This lovely design clearly shows that you don’t need a stone to make a ring attractive or interesting. And for us white-metal girlies, I will note that your pieces look just as good in silver as they do in copper. 🤎🩶
Hi Kelly! Beautiful ring! Beautiful work again! You always inspire me! I just did something that helped me out so much with my weaving as well as just being able to manipulate my wire so much easier. Like with the 7” of wire, I taped it in four places because the individual wires themselves were not wanting to stay in line, and I heated them up as well with my fingers to stay where I wanted them (in a straight line), then I took the tape off of the right side to start my weaving and the wire then “remembered” where it should be. It helped me out so much and my weave turned out so much better! When I was done with my weave I once again taped the end, did the same and my wires were straight and ready to manipulate again. This took out the need to run my wire over and over through the wire straighteners therefore hardening my wire which I did not want to do. I seem to always run into the problem of my wires not wanting to cooperate with me. 🤪This does add time, but for me, well worth it for the look that I’m after. Just something I thought I would share and if you want to share with your fans (☺️), you’re more than welcome to. I hope it might help someone else too. I hope this makes sense as well! lol Lisa. Take care!
😊 Hi, your ring, the design, the incorpoeated beads, and the liver of sulfur patina you did to make this ring look so fancy and gorgeous! Makes me smile and makes me want to try and make one. The ring is lovely! Thank you for sharing!
Hi Kelly! Its DD from ddlynndesigns. VERY CUTE! I did a similar concept with a hammered copper washer a few years back. The center of the washer was a spiral. Just thought I'd share.
I like to cut small pipes and make jump rings. Sand them alot, clean the inside, thats important. Worth the effort though, no chance of accidentally opening the the ring. Can't wait to try this ring. May I please ask where you bought this lovely pliers?
I really like you your top three of the people I go to for ideas. So I have to ask why can't you show the back of the designs and why can't you show the progress of designs What secrets are they giving away because well this is no secret I'm watching you on UA-cam just asking just want to know. Just a request could you make this ring with a heart please ❤
Hi, thank you. I ask that you don’t show the back or in progress as people won’t watch my videos, they’ll just look at your pictures. I get revenue (though not much) through google and I want people to come and watch my videos and see my adverts ☺️❤️ thank you
@@KellyJJewellery Interesting, all of it. Who would have imagined 10 years ago that you could actually make money off of something you obviously love to do.
Don't worry about inches in jewelry we use to metric system at least in NY. Thank you Kelly
I get people asking and I’m working it out now 😅 I’ve always seen everything in mm and cm ☺️haha
@KellyJJewellery metric system is my native, I am from Europe
You make it look so easy when you manipulate the wire and it goes just where you want it to go! I continue to struggle with this aspect. I’ll keep working on it! Thanks Kelly
It does take practice but I do edit and cut a lot of the video out to try and keep it short 😅 take it really slow, let the wires lead the way. Thanks for your lovely comment, really appreciated, have fun ❤️
This is LOVELY! I like the 'wire only' design, no stones. I want to make a BRACELET like this! Oooooyeah!!! Ta, Kelly!❤❤❤
Haha, thank you, that sounds wonderful!! Have fun❤️
Swooped scoop maybe love you Kelly you inspire alot of people,thank you
😆thanks so much 🤗🌸❤️
This lovely design clearly shows that you don’t need a stone to make a ring attractive or interesting. And for us white-metal girlies, I will note that your pieces look just as good in silver as they do in copper. 🤎🩶
Oh thanks so much, I do love copper 😅 haha, have fun ❤️
Hi Kelly! Beautiful ring! Beautiful work again! You always inspire me! I just did something that helped me out so much with my weaving as well as just being able to manipulate my wire so much easier. Like with the 7” of wire, I taped it in four places because the individual wires themselves were not wanting to stay in line, and I heated them up as well with my fingers to stay where I wanted them (in a straight line), then I took the tape off of the right side to start my weaving and the wire then “remembered” where it should be. It helped me out so much and my weave turned out so much better! When I was done with my weave I once again taped the end, did the same and my wires were straight and ready to manipulate again. This took out the need to run my wire over and over through the wire straighteners therefore hardening my wire which I did not want to do. I seem to always run into the problem of my wires not wanting to cooperate with me. 🤪This does add time, but for me, well worth it for the look that I’m after. Just something I thought I would share and if you want to share with your fans (☺️), you’re more than welcome to. I hope it might help someone else too. I hope this makes sense as well! lol Lisa. Take care!
Oo fantastic!! 👍 sounds great, glad you found a way. Thank you ❤️❤️
This is lovely, Kelly! I can't wait to make it myself. I love the copper too. Thank-you for sharing.🙂😇👣
You are so welcome! Thank you, have fun❤️
😊 Hi, your ring, the design, the incorpoeated beads, and the liver of sulfur patina you did to make this ring look so fancy and gorgeous! Makes me smile and makes me want to try and make one. The ring is lovely! Thank you for sharing!
Oh thank you so much, give it a go 😃❤️
You are wonderful at explaining what you are doing. The ring is beautiful. I really want to give this a try’ Ty ♥️
Oh thank you so much, that really means a lot to me!! 😀 have fun ❤️
Your videos have the most amazing clarity!!
Glad you think so! That really means a lot to me, thank you ❤️
Lovely as always Kelly!!! Really looking forward to trying it! Gracie adds so much to your videos...I giggle when I can hear her.
Oh she’s so loud and she keeps sneeking over and I don’t notice 😅 haha, thank you so much ❤️
I love this ring it's so beautiful thank you so much for showing us how to make it sweetie 🥰
You are so welcome, thank you, have fun. ❤️
Soooo pretty.
And the term “scoop” is perfect!
Great 😅 thank you ❤️🤗
Thank you Kelly for the lesson and beautiful design ❤
You are so welcome! Have fun ❤️❤️❤️
Really brilliant design I enjoyed watching this one. Thanks 🎉
Oh thanks so much ❤️❤️
That's really lovely, Kelly! Thank you!❤
You are so welcome! Thank you❤️
Beautiful! Such a graceful design. Love it.
Thank you! 😊 so much
Wow... this is beautiful! I love your work! 😊
Thanks so much ❤️
Love this! Another winner!❤❤❤❤🎉🎉🎉
Oh thank you ❤️❤️
Love this ring it's beautiful thanks for sharing 💞
You are so welcome, thank you ❤️
Beautiful design - well done Kelly x
Thanks so much ❤️
Hi Kelly! Its DD from ddlynndesigns. VERY CUTE! I did a similar concept with a hammered copper washer a few years back. The center of the washer was a spiral. Just thought I'd share.
Hiii.. Oo that’s a great idea!! I’m sure it was gorgeous! ❤️💕😍
That’s a very pretty ring, you’ve given me so many ideas with this, thank you so much Kelly x❤
You are so welcome, have fun ❤️
Such an attractive design
Thanks so much ❤️
This is just awesome . A true talent .Amazing work from a beautiful person .
Aw wow! Thank you so much ❤️❤️❤️
Thank you so much, Kelly! Im do happy that you Made a new beautiful Ring!😘
Thank you so much ❤️❤️❤️
I made the beautiful ring and it looks great. Thank you very much and keep up the good work 😃😘
This is just so genius! ❤❤❤
Oh wow!! Thank you so much❤️❤️❤️
I flipping love this!!!
😁thank you ❤️❤️❤️
another excellent tutorial 😍
Thank you so much 👍❤️
Very nice Kelly
Thanks so much ❤️
thanks
You are so welcome 💕
Wonderful tutorial, thank you.
You are very welcome, thank you ❤️
Beautiful ❤️
Thanks so much ❤️
Love it 💕
Thanks so much ❤️
Beautiful
Thank you ❤️❤️
Thanks!
Thank you so much 🤗
I like to cut small pipes and make jump rings. Sand them alot, clean the inside, thats important.
Worth the effort though, no chance of accidentally opening the the ring.
Can't wait to try this ring.
May I please ask where you bought this lovely pliers?
Thank you, yes give it a go 👍 tronex are available in the uk and us. Have fun ❤️
Thank you .... beautiful ❤
Aw thank you!!!
Molto bello!Grazie❤❤❤
You are so welcome!
I really like you your top three of the people I go to for ideas. So I have to ask why can't you show the back of the designs and why can't you show the progress of designs What secrets are they giving away because well this is no secret I'm watching you on UA-cam just asking just want to know.
Just a request could you make this ring with a heart please ❤
Hi, thank you. I ask that you don’t show the back or in progress as people won’t watch my videos, they’ll just look at your pictures. I get revenue (though not much) through google and I want people to come and watch my videos and see my adverts ☺️❤️ thank you
@@KellyJJewellery Interesting, all of it. Who would have imagined 10 years ago that you could actually make money off of something you obviously love to do.
Love this!
Can you tell me where you found your ring mandrel? I've been looking for one like that for ages!
Thank you, I got it off Etsy, I’ll find a link 👍
www.etsy.com/uk/listing/867869728/
Do you know what gauge wire the jump ring is made of?
I make mine with 1.5mm (14awg) 👍
Is the wire dead soft or half hard? This is a beautiful ring!
Thank you, dead soft - always 👍
Kelly, what kind of pliers are you using? These have very thin, I assume 1mm, pointed nose.
My pliers are needle nose tronex, I love them, very strong, I’ve had these years 👍
Go Gracie Go 😂
☺️❤️thank you