Removing transmission oil cooler on a Nissan Rogue

Поділитися
Вставка
  • Опубліковано 28 вер 2024

КОМЕНТАРІ • 30

  • @SeanHalliday-x9y
    @SeanHalliday-x9y 5 місяців тому

    Always nice to see someone else do it first thanks for the vid

  • @randycollens2681
    @randycollens2681 2 роки тому +1

    Seems like overkill. Those rubber hose lines crack and leak all the time. Likely all it was…

  • @peterluig4188
    @peterluig4188 5 місяців тому

    What year is this Rogue?

  • @fhidalgotvlogs459
    @fhidalgotvlogs459 3 роки тому

    Hi whats the symptoms of a bad trans oil cooler?

  • @poppaluv
    @poppaluv 3 роки тому

    i need to add a tranny cooler up front-radiator.

  • @rodger6940
    @rodger6940 2 роки тому

    What was wrong with it?

  • @scottgriffin449
    @scottgriffin449 2 роки тому +2

    These get clogged up overtime and should be removed and blown out using compressed air and reinstalled to avoid cvt from overheating if it gets really clogged up

    • @lutomson3496
      @lutomson3496 2 роки тому

      or install a larger external cooler to mitigate

    • @shellybelle6781
      @shellybelle6781 Рік тому

      @@lutomson3496would that be easier?

    • @shellybelle6781
      @shellybelle6781 Рік тому

      Mine is over heating . It goes in limp mode when I drive over 60. Please can you tell me what to do?

    • @keithfazekas205
      @keithfazekas205 Рік тому

      @@shellybelle6781 Reading lots of UA-cam’s the cooler can be cleaned or replaced and also there is a filter behind this cooler unit. Also you definitely need a oil change and screen filter change with transmission pan removed to see if any metal on bottom of pan. I had my oil changed without pan removed and it stopped problem but 2 years later I have transmission slip at highway speeds. Like car feels like slipping on ice. Now I will have filters changed. Also some people say flush torque converter oil flushing all transmission oil through using the cooler lines. That makes it a Full oil change!

  • @edwinalexander1170
    @edwinalexander1170 2 роки тому +1

    If i want to add after market cooler how can i connect it to this stock cooler?

  • @trustmebrother
    @trustmebrother 4 місяці тому

    What year?

  • @mohammedjassem4185
    @mohammedjassem4185 Рік тому

    The radiator in the video has 4 outlets. The question here is: Are these outlets two of them for gear oil and the other two for water?

  • @miguelflores1306
    @miguelflores1306 2 роки тому

    Would it make a loud pitch noise when giving the car RPM’s? It’s also shakes

  • @keemsmediaVR30
    @keemsmediaVR30 3 роки тому +1

    🔥🔥🔥🔥

  • @RobertReynolds-mg9bb
    @RobertReynolds-mg9bb 8 місяців тому

    Looks totally different than mine

  • @PaulieWalnutss
    @PaulieWalnutss 3 роки тому +1

    Wua guan Momo! Is this the 2.5 ?

    • @DULLAHGOSOHARD
      @DULLAHGOSOHARD  3 роки тому +1

      Deh yah bredda, yes it's the one with the 2.5

    • @sc5015
      @sc5015 3 роки тому

      The 2.5 is only option for the Rouge, if you want a 6 you need to look for a Murano.

  • @IraqInMyBlood
    @IraqInMyBlood 3 роки тому +1

    What year is your Rogue please??

  • @chriswilliams9535
    @chriswilliams9535 3 роки тому

    What size are the 4 mount bolts I know they 10 mm but I snapped one I was wander the length of you know

    • @DULLAHGOSOHARD
      @DULLAHGOSOHARD  3 роки тому +1

      Take out one and take it to the auto parts store and match it

  • @randykerr4113
    @randykerr4113 2 роки тому

    Yeah bredda mi like it

  • @marcosanchez896
    @marcosanchez896 5 місяців тому

    YOU ARE TORALLY WRONG! YOU ARE REPLACING THE ENGINE OIL COOLER NOT THE TRANSMISSION OIL COOLER!

    • @thx1138guy
      @thx1138guy 5 місяців тому +1

      You don't know what you're talking about marcosanchez896. There is no doubt whatsoever that it's the CVT oil warmer.

    • @dikoman516
      @dikoman516 23 дні тому

      You're wrong amigo