Great tutorial video! Having same noise problems with my Stage 2EX HP76 and the foam on mine looks as bad as on yours. Will have to do the same foam/felt exchange and maybe grease the keys again in the summer. Where the keys easy to remove?
In my case (NS2 HA88) I had problems with some contact pads- I wonder whether it would have been worth taking them out (clean or replace) as well, while doing this intensive and tedious work.
I would have removed all the keys before replacing the sponge strip, so it could be applied with the keyboard the right way up and also prevent scuffing the keys as it looks like its layed keys down on a stone tile bench. Nice instructional video though.
I used this www.amazon.co.uk/dp/B0BCQK7LV1?psc=1&ref=ppx_yo2ov_dt_b_product_details It is a bit thicker than what looks like a spray type used in the factory. And takes a couple of weeks to wear in, will seem slightly spongy at first. But I am hoping in it will last longer in the long run than the thinner spray type.
Muchas gracias por tu video, reparé mi nord stage 3 y ya no hace ruido pero necesito saber donde comprar los martillos que llevan la pieza metálica en su interior porque me di cuenta que algunos los tengo agrietados.
Hmm you know too much!! Too quote ben Kenobi "EFS... now that's a name I have not heard in a long time" and erm yes I always need Lundahl transformers!!
@@reallyniceaudio Aye was a while ago now in a galaxy far far way...sitting in the tech office with Val, Norton, Kev et al.. Not sure how busy you are but I have a shed load of old studio gear that needs a new life so if your interested let me know - Knoxy
@@frequencymanipulator Mr Norton! Good to see you are well. Weirdly I just found a picture of a green GTI after it became grounded in Ealing Film Studios 👌... Hang out is far far north of the M25. Will email Narmerio. Dont work too hard.
Well, I am so lucky you published this. Just a bit of the puzzle how to get keys off. Thanks !!
Did you find how to get the keys off? Struggling with that now!
Thank you for video! Same problem.. where did you get new foam?
That is what i also like to know. I have the same model and same "clanky" keyboard!
Great tutorial video! Having same noise problems with my Stage 2EX HP76 and the foam on mine looks as bad as on yours. Will have to do the same foam/felt exchange and maybe grease the keys again in the summer. Where the keys easy to remove?
In my case (NS2 HA88) I had problems with some contact pads- I wonder whether it would have been worth taking them out (clean or replace) as well, while doing this intensive and tedious work.
I would have removed all the keys before replacing the sponge strip, so it could be applied with the keyboard the right way up and also prevent scuffing the keys as it looks like its layed keys down on a stone tile bench. Nice instructional video though.
What grease you used?
I used this
www.amazon.co.uk/dp/B0BCQK7LV1?psc=1&ref=ppx_yo2ov_dt_b_product_details
It is a bit thicker than what looks like a spray type used in the factory. And takes a couple of weeks to wear in, will seem slightly spongy at first. But I am hoping in it will last longer in the long run than the thinner spray type.
Muchas gracias por tu video, reparé mi nord stage 3 y ya no hace ruido pero necesito saber donde comprar los martillos que llevan la pieza metálica en su interior porque me di cuenta que algunos los tengo agrietados.
Great video - horrible music
EFS crew still fixing stuff, class. You need anymore Lundahl transformers?...
Hmm you know too much!! Too quote ben Kenobi "EFS... now that's a name I have not heard in a long time" and erm yes I always need Lundahl transformers!!
@@reallyniceaudio Aye was a while ago now in a galaxy far far way...sitting in the tech office with Val, Norton, Kev et al.. Not sure how busy you are but I have a shed load of old studio gear that needs a new life so if your interested let me know - Knoxy
@@goddamnox Duuuddeeeee SO COOL to hear from you man. Where do we come to hang out?
@@frequencymanipulator Mr Norton! Good to see you are well. Weirdly I just found a picture of a green GTI after it became grounded in Ealing Film Studios 👌... Hang out is far far north of the M25. Will email Narmerio. Dont work too hard.