The hydro filler caps separate so the entire body does not need to be removed. Pull the plastic pin and give small turn to separate. The leash will hold too to bottom of filler cap.
Ive got the same mower. Do you happen to know what the micron rating is for the badboy hydro filters? I want to go with Wix but they show the ones youre using & they show a 51519. The microns & price are quite a bit different. Thanks.
I do not know that info did some reasearch and that is the ones I found that they said worked for it. I am sure there a few that will work. I can't recall even where I got them. Hope the video helped you out!
Dont remeber exactly but was less than they said it held. Figured still has some in the pumps and drives. Thinking it was almost a 1/2 court less a side.
Yes I got the job completed it was not too hard at all. My concern was the hydraulic fluid and the wheel motors was not changed. The only fluid that come out of the lawn mower was in the metal containers with the filters
I got right at 3 qts in mine and ot up to the bottom of the fitting in the sight glass. Also did anybodys wheels turn when the bypass valve was open???? Mine did..
I raise my deck many times while cutting . And with longer legs hard to do without moving the handles out and usually have to stop to do. Dont with the extension.
@@robertmalensek5736 Geeeeeezzzzz, buy the electric deck actuator, all mine have them. I promise you will realize that's the best accessory you can buy.
Your voice is awesome. So smooth and easy to understand. Great accent. Thanks for the video.
Thanks for the video. Is that an 8n in the background?
@@alpine5551 yes it is
@@robertmalensek5736 that’s awesome! My grandad had an old 2n. Great old tractors! Take care!
The hydro filler caps separate so the entire body does not need to be removed. Pull the plastic pin and give small turn to separate. The leash will hold too to bottom of filler cap.
Little confused for me you lose the bypass nuts wy is need to do it ? and I don't see you tied back on before you run you wheels
Leave them open to run fluid threw and get the air out if any.
Ive got the same mower. Do you happen to know what the micron rating is for the badboy hydro filters? I want to go with Wix but they show the ones youre using & they show a 51519. The microns & price are quite a bit different. Thanks.
I do not know that info did some reasearch and that is the ones I found that they said worked for it. I am sure there a few that will work. I can't recall even where I got them. Hope the video helped you out!
How much oil did you end up putting in each side?
Dont remeber exactly but was less than they said it held. Figured still has some in the pumps and drives. Thinking it was almost a 1/2 court less a side.
Are those the bypass valves that will allow the mower to free wheel??
Yes
@@robertmalensek5736 thank you!
Does all of the hydraulic fluid that needs changing come out of the filter was Mounted on the lawn mower
That is how the book says to do it.
Yes I got the job completed it was not too hard at all. My concern was the hydraulic fluid and the wheel motors was not changed. The only fluid that come out of the lawn mower was in the metal containers with the filters
I got right at 3 qts in mine and ot up to the bottom of the fitting in the sight glass.
Also did anybodys wheels turn when the bypass valve was open????
Mine did..
Where did you find the exhaust tips at? I have a bad boy rebel and want some
I found them on ebay.
How did you attach the turnouts onto the exhaust?
I just slid them on and pushed as they got tight at the back and have not moved
whats the deal with the deck lift extention
I raise my deck many times while cutting . And with longer legs hard to do without moving the handles out and usually have to stop to do. Dont with the extension.
@@robertmalensek5736 Geeeeeezzzzz, buy the electric deck actuator, all mine have them. I promise you will realize that's the best accessory you can buy.