Since i start learning Autocad & 3D modeling , I've found that your tutorials are the best ones here in UA-cam , i learned a lottt from this lessons , thanks a lot sir for all your efforts & for sharing ,
Sir, ur teaching is soooooo gud dat. I hv learnt autocad from a centre but still they didn't tought a single command what I'm getting thro ur vedios. I'm feeling like I got a gud master who/ whose vedios will help my career. Thank you soo much sir.
You are the best tutor of Autocad in UA-cam. , YOu are excellent teacher in Autocad. Thank for your generous efforts, for making such a useful acad tutorials andalso uploading them in YT.
hi Sabeercad, thank you for your uploads! very useful! I'm just curious, why you did table as 1 part, logically it should be assembly for fabrication. can you please upload some video with detailing assembly? thank you very much again. Tatiana
Thank for the tutorial. Its great. I'm having a problem putting material on the legs of my table. Once I array the legs, they become an 'array' and not a solid, thus not allowing me to put material on them. How would I rectify this? I tried 'Interference' and it showed where the legs join, there is an overlap. Since my legs are not solid I can not subtract or union. Since my stem, (vertical part of base) is a solid, I cannot trim. Help!
The array which yoiu have got must be an array object which will remain as a single unit. Just give EXPLODE command on this to convert it into a solid object . You cannot trim a solid object. If you want to remove a portion of a solid object , Try SOLIDEDIT command .
thanks sir, i able to make a table and understand revolving command. but 1 thing is not know how meterals used in a table. like wood shap or a glass shap etc
You have to specify the center of the array properly . You can change the center using the ribbon panel . Or you give ARRAY command and give an Enter you get a dialogue box where in you can choose polar and specify the center using the mouse
sabeercad tinypic.com/view.php?pic=2jexru1&s=8#.VIem9TGsVis Why can't I select that to you? I can give you if you do not select the color as it should.
+Megha Hiremat Thanks again . Can you just Google "sabeercad" and put your review about my training in my Google business page (just browse using Google chrome browser , you can see the page on the right side and put star rating too) .
+sabeercad brother, i've got a problem in following this procedure, after doing the table's stem,when i was starting to revolve it, it said, " Unable to revolve object." i followed the procedure step by step making sure that the ucs was at the view option which was at front view if i'm not mistaken. PLEASE HELP me :) thanks Great tutorials btw. Subscribed
After creating the profile . If you were not able to revolve it , the profile may not be closed one. so you can either trace it once more over the existing profile or else you can use Bpoly or Boundary command. Just give any of these commands , pick a point inside the existing profile , the software will automatically trace the boundary for you. Then you revolve that boundary. Just try it . All the best....
i've got it. thanks a lot my error was creating a Pline at 0,0 then entering close. basically i entered 2 mistakes :) thanks again. its working perfectly now :)
Since i start learning Autocad & 3D modeling , I've found that your tutorials are the best ones here in UA-cam , i learned a lottt from this lessons , thanks a lot sir for all your efforts & for sharing ,
Fouad EL HOUSNA You are welcome
+1 (me too)
Sir, ur teaching is soooooo gud dat. I hv learnt autocad from a centre but still they didn't tought a single command what I'm getting thro ur vedios. I'm feeling like I got a gud master who/ whose vedios will help my career. Thank you soo much sir.
+Megha Hiremat You are most welcome 👍 Really happy to hear that ☺
You are the best tutor of Autocad in UA-cam. , YOu are excellent teacher in Autocad. Thank for your generous efforts, for making such a useful acad tutorials andalso uploading them in YT.
You are most welcome . I apreciate your interest . Explore all videos . All the best...
Thank you very very much ! Respect ! You made me understand how AutoCAD works and made me think is not a so hard to use program! Thank you again !
You are most welcome. I appreciate your interest.
Thanks sir
Great work
All the best 👍
thanks again for another tutorial hope you wont get tired making video tutorial for helping others specially beginners more power to you
APPRECIATE YOUR EFFORT & DEDICATION FOR DOING THESE TUTORIALS AND I HOPE YOU DO MORE.
THUMBS UP #sabeercad
i learned a lot from your lessons , thanks so much
U are the right person I need bro
really good presentation sir,very less indians do this ueful tuts,i am a dentist , dr jose
Thanks for that comment. ..
thank you Mr Sabeer very good ....nice
Thanks haha..it means a lot to me..this is my problem in autocad I'm using autocad modeling in 3d..we dont have 3Ds max software in office..
Perfect tutorial thanking for sharing
You are most welcome 😊👍
This is nice what about making the roof?
thank u so much admin. I'm very glad to wait ur next video, subscribe and like ..
Thanks Sabeer. very helpful :D
You are welcome...
Thanks a lot sir for your good tutorial...
You are most welcome
hi Sabeercad,
thank you for your uploads! very useful! I'm just curious, why you did table as 1 part, logically it should be assembly for fabrication. can you please upload some video with detailing assembly? thank you very much again. Tatiana
How can I achieve a rendered quality but i want to view it 360°. I made a wrist watch. I also want to animate the clock
thank you sir for great video..assalamualaikum..
BEST. TUTORIAL. EVER!!!
:3
nice tutorials thanks lot.
You are welcome
Thank you. Sir how made stare cases
Will come out with a video on this Topic
Thank you sir have a nice tutorial
You are most welcome
That was an interesting tutorial please can u do more videos involving rendering? Thanks
I have plans to do more tutorials ..
Ok that will be good im anxiously waiting
It is a great low maintenance
Thank for the tutorial. Its great. I'm having a problem putting material on the legs of my table. Once I array the legs, they become an 'array' and not a solid, thus not allowing me to put material on them. How would I rectify this? I tried 'Interference' and it showed where the legs join, there is an overlap. Since my legs are not solid I can not subtract or union. Since my stem, (vertical part of base) is a solid, I cannot trim. Help!
The array which yoiu have got must be an array object which will remain as a single unit. Just give EXPLODE command on this to convert it into a solid object . You cannot trim a solid object. If you want to remove a portion of a solid object , Try SOLIDEDIT command .
sabeercad Thank you so much!
I am a furniture manufacturer and I want to design furnitures in this software ,so what should I do in order to study this designing tutorial
You can contact me in +919895835350 (call or whatsapp). I will give you more details regarding the same.
thank u so much admin.
2d elevation 3d ke tarah kasy banay gy 3d mA kaam ni karna elevations pr koi video ha
Please watch my video on View ports in Mechanical modeling section
thank you! for this video sir :)
hello sir i am unable to revolve when i use revolve command then after it shows unable to revolve selected object..
Just create the profile once more and close the last vertex using the CLOSE option of polyline command
very nice
Mr, Sabeer, how can join your VTC INTERNSHALA TRAINING IN AUTOCAD.
Yes , You can . Please visit www.vtc.internshala.com
thanks sir, i able to make a table and understand revolving command. but 1 thing is not know how meterals used in a table. like wood shap or a glass shap etc
+uzair ahmad For that you have assign materials to the objects that you create using the RMAT command
sir if you have a any tutorial where RAMIT commend is usrd plz sand?
Will post in future. Just wait for it
thank you so much for helping us
GOD BLESS YOU
You are welcome
SIR? this same table is create in 2007 cad will possible sir?
Yes.
nice
good!
THANK U VERY MUCH SIR
You are welcome :)
cool
Thank you ...
HI SIR GOOD MORNING ,your class is more help me a lot to take class for student thanks
You are most welcome...
I can not find the command "ARRAYCLASSIC". Do you have another solution? Where to give commands "ARRAY"? Use "AutoCAD 2012".
You can try ARRAY command . You will get the same options.
I can't pick the number. I can't make them move in the Center.
Do you have another solution? Please help me out.
You have to specify the center of the array properly . You can change the center using the ribbon panel . Or you give ARRAY command and give an Enter you get a dialogue box where in you can choose polar and specify the center using the mouse
sabeercad tinypic.com/view.php?pic=2jexru1&s=8#.VIem9TGsVis
Why can't I select that to you?
I can give you if you do not select the color as it should.
Sir plz ek video 3d car model plz
I'm feeling like to meet u once. So if possible please giv me a chance to meet you once sir. :)
Megha Hiremat yea... we can ☺
+Megha Hiremat Thanks again . Can you just Google "sabeercad" and put your review about my training in my Google business page (just browse using Google chrome browser , you can see the page on the right side and put star rating too) .
K sure sir :)
+sabeercad brother, i've got a problem in following this procedure, after doing the table's stem,when i was starting to revolve it, it said, " Unable to revolve object." i followed the procedure step by step making sure that the ucs was at the view option which was at front view if i'm not mistaken. PLEASE HELP me :) thanks Great tutorials btw. Subscribed
After creating the profile . If you were not able to revolve it , the profile may not be closed one. so you can either trace it once more over the existing profile or else you can use Bpoly or Boundary command. Just give any of these commands , pick a point inside the existing profile , the software will automatically trace the boundary for you. Then you revolve that boundary. Just try it . All the best....
i've got it. thanks a lot my error was creating a Pline at 0,0 then entering close. basically i entered 2 mistakes :) thanks again. its working perfectly now :)
full back
siz ingilizce konuşmayın bence
very nice