Pake solder sunshine (link di deskrpisi), set suhu 350-370 der celcius, pakai cetakan bunga solder yg pinggirannya smooth, alas potong pakai keramik (bisa beli di toko bangunan, yg aku pakai so far adalah sisa jadi murah banget, latihan terus, jam terbang tak pernah mengkhianati hasil, sing penting ki suabaaaaaarrr 😂😂.
Ahhhh I tried this but I can’t get it as clean looking as yours, I also used chiffon and organza but organza looked better...does this mean my soldering iron is not hot enough or I just need practice?
Dont worry, at FIRST i also feel MISERABLE 😆. My petal was burn and sticky edge. It takes me months-years to master all type of fabrics to adjust the heat. Lucky me, i run a small business on these stuffs, so i practice a lot. Yes, the key is the heat. Too hot and too low would result bad petal. From my experience, Good petal result is the combination of these: 1. Smooth edge stencil (my stencil are mostly handmade, when i cut them, i make sure that the edge is smooth) 2. Suitable heat. What heat should be use is depend on the fabric. My solder heat default is around 350-380 celcius, the thinner the fabric is, the lower the heat needed. 3. Use smooth ceramic as a cutting base. 4. Sharp tip of solder iron. I have 3 solder iron and only use one of them. If you can find Sunshine SL 908 (60 watt), then buy it. Very cheap, less than 5 USD. 5. Be patient and enjoy the crafting time, keep practice beacause no one is born gifted 😄
Have you ever used a heat gun? There is a stations that has both soldier iron and heat gun and both has heat control. I cut with soldier iron and use heat gun to shape the fabric. What do you thin? Is it feasible? @@TasyaCraft
@@mahnoorfarooq9318 it is artificial stamen. You can buy it in craft store. Actually you can make them at home using corn starch and nail polish, but since this is cheap, it is better to use machine made stamen. Handmade stamen is time consuming.
For now, I only sell for lokal market. Anyway why dont you learn to make it or ask local crafter to make it for you, it is very easy (it just need practice to make it even more beuatiful) and of course cost you less ☺
You can buy organza in local fabric store, it is cheap depend on its quality, price range 2-4 USD per meter square (100*120 cm), beads and artificial stamen in craft store. Or go to aliexpress, but the shipping time is not friendly, sometimes it takes 6-8 weeks for the goods to be arrived.
Nyesel baru nemu yt nya mbaa 😭😭,, thanks buat sharing nya mbaa.. ❤️❤️
Iya sis, sama2.
Kak tasya, alas utk kainnya apa itu yg putih? Biar gk kbakar solder?
wahh bagus sekali 😍😍😍
terimakasih tutorialnya mba..😄
Ap ne kon sa favourite use Kiya hai
hi, this iron can be used to make flowers with any fabric or just organza?
So beautiful ❤
ayo donk channel km lbh d optimasi lg. soalx keren bgt dan edukatif , semangat ya
Aduuuh sory banget ya sis kalo ngebosenin, aku tu gak bisa ngedit video dan gaptek seo 😆😆. Disambi nyemil2 aja biar gak ngantuk nontonya 🤭
Masukin suarany kak biar sambil ad penjelasanny hhe
So beautiful
Great idea. I've been using a candle so ty.. I'll do this now.
Kak itu bakalan rusak gak kelopaknya kalau tanpa di bakar ke lilin ?
Manfaat banget ka, jadi pingin coba
Ayoo dicoba, bunga ini bagus banget di tempel di dress trus versi kecionya jd headband jadi matching :)
It's kaviya
Hi love the tutorial. What did you use to cut the material.
Thanks 😃. It is called solder iron.
Hermosas flores! Gracias
ma'am, which glu gun you used.. thank you.
Y si quiero hacer tulipanes para usar de centro de mesa, como haría?
Bagi tips agar nyolder kain rapi sis
Pake solder sunshine (link di deskrpisi), set suhu 350-370 der celcius, pakai cetakan bunga solder yg pinggirannya smooth, alas potong pakai keramik (bisa beli di toko bangunan, yg aku pakai so far adalah sisa jadi murah banget, latihan terus, jam terbang tak pernah mengkhianati hasil, sing penting ki suabaaaaaarrr 😂😂.
Kak link shopee nya untuk pembelian solder gak bisa diklik kak... Mau tanya untuk mata solder bulatnya beli dimana kak terimakasih sebelumnya 🙏
shope.ee/5pTuHlzKcK
Como se llama la herramienta con que cortas la tela?
In the description box.
Plz tell me the fabric name of this flower
How to cut if there is no solder iron?
Wow i loved it's soo beautiful 😍what's the material for the white circle that you used.
Thanks. Idont know the name, but you can use flanel to make this round shape.
@@TasyaCraft ok, thank you😍
Soo beautiful work mam 🥰
💖
That flower cutting machine name?
Soldering iron
Kak beli soldernya dimana ya?
Di shopee mbak, solder sunshine harga skitar 70k.
hi what is the name of the toll that you cut the fabric?
Solder iron.
Ahhhh I tried this but I can’t get it as clean looking as yours, I also used chiffon and organza but organza looked better...does this mean my soldering iron is not hot enough or I just need practice?
Dont worry, at FIRST i also feel MISERABLE 😆. My petal was burn and sticky edge. It takes me months-years to master all type of fabrics to adjust the heat. Lucky me, i run a small business on these stuffs, so i practice a lot. Yes, the key is the heat. Too hot and too low would result bad petal. From my experience,
Good petal result is the combination of these:
1. Smooth edge stencil (my stencil are mostly handmade, when i cut them, i make sure that the edge is smooth)
2. Suitable heat. What heat should be use is depend on the fabric. My solder heat default is around 350-380 celcius, the thinner the fabric is, the lower the heat needed.
3. Use smooth ceramic as a cutting base.
4. Sharp tip of solder iron. I have 3 solder iron and only use one of them. If you can find Sunshine SL 908 (60 watt), then buy it. Very cheap, less than 5 USD.
5. Be patient and enjoy the crafting time, keep practice beacause no one is born gifted 😄
@@TasyaCraft ooh thank you for taking the time to write this!
Have you ever used a heat gun? There is a stations that has both soldier iron and heat gun and both has heat control. I cut with soldier iron and use heat gun to shape the fabric. What do you thin? Is it feasible? @@TasyaCraft
Dimana beli cetakan bunganya kak?
shp.ee/pqnmp2t
@@TasyaCraft terima kasih kak
Thank you ♥️♥️♥️
What is the name of this tool 0:27
Can i use chiffon fabric for this one?
Of course, you can use any synthetic fabric to make this flower. I also use chiffon because it is cheaper and easy to cut with solder iron.
What are those u used below pearls... ??
It is like flanel but thinner, you can use flanel anyway.
Name of the machine plz have you used to cut the flower?
Solder iron.
absolutely darling!
Flowers cutting machine is called soldering iron
Hola me encantó la flor, dónde consigo el molde metálico para hacer la flor? Gracias, saludos desde Chiapas, México.
Yo mismo hice este molde de metal. también puedes hacerlo. muy fácil. por favor vea el tutorial en mi otro video. Gracias por ver 😊
@@TasyaCraft gracias por responder ya encontré el tutorial y estoy en ello para hacer mis moldes. Saludos desde Chiapas, México.
cetakan bunganya beli dimana?
Bikin sendiri dong 😊, silakan skrol ke bawah ada video tutorial cara membuat cetakan bunga solder. Murah dan gampang banget bikinnya.
Woow thanks
really very nicr
love your tutorials.
What material do you use to make long hanging details of flower?
Which one?
@@TasyaCraft the long threads around the central beads??
@@mahnoorfarooq9318 it is artificial stamen. You can buy it in craft store. Actually you can make them at home using corn starch and nail polish, but since this is cheap, it is better to use machine made stamen. Handmade stamen is time consuming.
@@TasyaCraft thank you so much for your guidance.
Cutting machine name
Solder iron cutter machine
Ka jual cetakan bunganya dong ka,
Udah habis sis, dulu bikin banyak yg premium series, sebulan udah habis 😅. Belum restok lagi sampai sekarang.
This machin name pls
Solder iron
Mam Cloths name?
Organza fabric.
Nice
Thanks 😄
Tasya Craft are you interested in my channel
Is there sale??
For now, I only sell for lokal market.
Anyway why dont you learn to make it or ask local crafter to make it for you, it is very easy (it just need practice to make it even more beuatiful) and of course cost you less ☺
Can u pls tell from where u buy that organza material
You can buy organza in local fabric store, it is cheap depend on its quality, price range 2-4 USD per meter square (100*120 cm), beads and artificial stamen in craft store. Or go to aliexpress, but the shipping time is not friendly, sometimes it takes 6-8 weeks for the goods to be arrived.
I run small business related to my crafts here, and i can tell you it is really a great business :).
Lebar berapa kak
Hi! what do you use to make the stencil?
It's thin platinium sheet. But you can also use pepsi/coca cola can.
thank you for that ❤️ super great tutorial, i love it!
@@piesteban your welcome 😀
Mba sertakan bahan2 yg dibutuhkannya...
Terima kasih masukannya. Sudah saya update di deskripsi mbak 😄😄.
Mba lem tembaknya merk apa yah??
Merk v-teck mbak, tapi kualitas sama aja dengan yang biru (yang banyak di pasaran). Aku pakai dua2nya dan gak ada bedanya 😀.
🤗🤗🤗🤗😍😍😍😍😙
Cotton name
Organza
Tq
i.
Kak link shopee nya untuk pembelian solder gak bisa diklik kak... Mau tanya untuk mata solder bulatnya beli dimana kak terimakasih sebelumnya 🙏