MANY years ago I rode in a friend's '56 Chev 210 with 327 with marine heads (?!), FI pistons and Arnold Charles cam. It had the Offy 4X2 set-up up top and throttle response was RIGHT NOW!! What worked then will still work for those of us not brainwashed by "electronics".
I have a Edelbrock xc-96 BBC X-RAM . Can l EFI Carburettors on it ??? And how much 4 the linkage kit 2 make this work . Love ❤️ what u share . Thx 4 getting back 2 me when time permits. Robert Australia 🇦🇺. Going 2 build up a 496 or 525 for a Beismeyer long deck flat bottom v-drive
will it give me more power and torque if i install 5 inch high spacers between the carburetor and the manifold on a four 2 barrel or six 2 barrel manifold ?
I have a offenhauser for two barrel intake 4 bolt pattern I'm trying to find the correct carburetors that will work I have one Rochester two barrel that has the same bolt pattern but I'm unable to find the other three any help would be great thank you
I have a 8ba flathead and wish to install duel 97 , do yo have a duel manifold that will also allow the normal position for the 12v alternator power gen
MANY years ago I rode in a friend's '56 Chev 210 with 327 with marine heads (?!), FI pistons and Arnold Charles cam. It had the Offy 4X2 set-up up top and throttle response was RIGHT NOW!! What worked then will still work for those of us not brainwashed by "electronics".
I just installed this set up and so far so good!
Great video!!!! I might have to consider that for my deuce coupe. If I use a sbc for power. Thanks for sharing!!!! You made my day!!!!
I have a Edelbrock xc-96 BBC X-RAM .
Can l EFI Carburettors on it ??? And how much 4 the linkage kit 2 make this work .
Love ❤️ what u share .
Thx 4 getting back 2 me when time permits. Robert Australia 🇦🇺.
Going 2 build up a 496 or 525 for a Beismeyer long deck flat bottom v-drive
will it give me more power and torque if i install 5 inch high spacers between the carburetor and the manifold on a four 2 barrel or six 2 barrel manifold ?
I have a offenhauser for two barrel intake 4 bolt pattern I'm trying to find the correct carburetors that will work I have one Rochester two barrel that has the same bolt pattern but I'm unable to find the other three any help would be great thank you
Is it possible to still get the throttle linkage for this intake
so does this have to use a small distributor like the 6x2 set up?
66 Gordo yep this needs a small distributor as well
I have a 8ba flathead and wish to install duel 97 , do yo have a duel manifold that will also allow the normal position for the 12v alternator power gen
I have a ford 352 fe in my 1960 thunderbird what can I give it for more power and wow factor?
please tell me y'all have these for 348/409s!
yaaaahhh ,
i think it and he say it !
the millner secret ! the offenhauser manifold !