This phone was for training video only, no? The phone has a short on VCC_MAIN because C5202_RF is bad--look at burn marks. It didn't need PMIC change. So many phones are ruined by people who follow and just think "no power = I should change PMIC" Still love your skills, thanks for sharing :)
+iPad Rehab Probably checked the voltage out Jessa direct from pmic is bad for cpu gpu etc and the input voltage is fine indicating faulty pmic I did spot water damage at pmu desense cap C5203_RF I doubt he would change the pmic without good reason unless he's just showing off lol.
I don''t think he is a showing off type. Check out his other videos. The main thing is he doesn't even use high end tools like Jessa. I am not trying to put Jessa But this guy is really inspiring.
That was sarcasm he's highly skilled. i personally use thermo couples for everything take no risks, this guy has a feel for it you can see him prodding components to make sure the board has reached temp efficient technique it's like art and his timing is perfect. .
firstly, for the original PM IC (never reball before) if you hot till the solder can come out like that for sure the CPU will over hit. second, the new PM IC if you are not reball before put in it is very high chance to damage CPU. and at last, before check with other LCD it was arabic language and after that it became english.
First I thank you for watching our video and you post your questions or doubts in brief.changing the language is not a big deal. I wanna make you clear that,if you didn't do something it doesn't mean someone can't do that work . Do you think all our videos are not genuine?if you can check them all.
accept the opinion to be good for later better than you deny it. I dont know, event dont care where you are but one thing for sure that i did iphone 6 more than times you eat per day. Br!
Hi i usually repair iphone screens etc never went to that that extent working with the circuit board but im interested to know what your actually replacing and what materials you have been using, Thank you ?
hey, two questions : 1. what is the temperature of the heat gun ? 2. after the soldering you are using DVM to measure impedance or short ? and what are the points on the board to do it, beside the gnd of course?
I replaced the screen in my iPhone 6. The CPU and Home button got really hot so I disconnected the batter. The phone will not turn on again and is not detected my iTunes. Do you think the PM ic is the culprit?
Can you please help me... after removing ic chip or any other, you have to clean that small (round circle) solder pins on motherboard...How to clean them without damaging the motherboard? I tried it once but i pulled the copper from the motherboard, basicly ruined it. Do i have to preheat the motherboard and then try with soldering gun and solder wick? What i did was putting soldering paste....using soldering gun over wick and trying to remove the extra solder from motherboard...the effect was clean motherboard but also pulling some small copper pins and in that way destroying the motherboard. Thank you in advacne for help...
hello how are you please am asking about charging problem on iphone 6 I changed u2 ic ,USB control ic and change any part on charging area but dos not working (The device charging when it shut don
How do you find out if the PMIC and screen need replacing if water damaged, I have two iPhone 6 and Samsung s6, both water damage both with not turn on?
I have an iPhone 6 - it doesnt appear on any computer using any apple lightning cable - it only charge once connected. I am sure it's not the cable nor the pc because i tried another iPhone 6 and it works.. Could it be my data terminal of my iPhone 6 is busted? (not the charging terminal) pls advise
hey my iphone was water damage and i could not restore it now. I brought it to repair shop and they said, might a flash storage problem, so how can I fix this?
Hi DEEP FIX. i have an iphone 6 which died after getting hot. now it doesnt turn on and when i attach battery and hit power button, the cpu gets hot until i remove the battery. which ic should i replace. the pm ic or u2?? please let me know, i need your help
You will find out which part needs changing by the power it receives OR lack of power depending on the component. You will need a multi meter and an independent power supply to test out the different amps and volts of the components. Plus a schematic (circuit diagram) comes in handy.
Hi, THanks for Yor response. When I attach multimeter this way as You show in the video at 3 min 35 sec I get no beep and it only shows 301 continuity at the multimeter display. Does that mean that it's the big pm ic that needs to be replaced?
Sir I have a iPhone 6 which is dead I have shown that phone to my other repairers but each one said that it can't be repaired. Would you please help me with it.
where can I get replacement ic chips? and what does th letters pm stand for? and do you ever reball any ic's? and if so where can I get deal with a company who will have these chips as soon as they become available. .Any information you can give me would be helpful at this time. Thank You very much .
Each time I see you perform a smartphone IC swap, I wonder how do you know that it's correctly positioned. Contact pads are minuscule and precision is critical.
my phone 6plus 64gb problematic on the motherboard. Can it be replaced with motherboard that I will buy in lazada. Will it later run smoothly just by replacing the motherboard only?
I have an iPhone 6 as the battery discharges very fast , because I changed the battery and connector will be the problem , or know tell me which defective IC.
Please sir, could you help me diagnose my hardware problem? I replaced the battery and after one week I forgot to recharge it because it was stuck in 100% most of the time and it suddently turned off. After that it won't go beyond the apple logo boot, it vanishes and reboot. I tried recover it on iTunes and after sending the firmware it reboots and the apple logo appears with the progress bar but it turns off (slowly vanishing) and reboot itself to the iTunes connect logo. I will replace the IC but there is the tristar (U2) and the power management (U7) I don't know which of them i should replace.
Thanks! few more questions. What temp are you preheating at? Also, what temp for hot air? This is all lead free right? What is your success rate with this? I just want to get an idea of the melting. Points. I prefer to use a k-type thermocouple with digital thermometer to assist in regulating the heat. Thats how I do it with my bag rework station for bigger bgas
DEEP FIX Hi love your videos excellent stuff what you do. I'm new to all the rework. I my self have a hot air station. And I was wondering what temperature you use to remove and to install the chip and at what air flow rate would you recommend may I ask .Thanks in advance
Hello sir, my iphone 6 is dead, changing lcd and battery is not working, but when i connected it on itunes it recognize my phone but nothing shows on the screen just black, what is the problem? Pm ic or u2 ic?
th2010 , if you look at his other videos you can see the following settings temperature is set to 380 Air flow is set to 5 when he removes the chips, and by the air flow sound you can hear when he is putting the chip back, i would guess he lowers the air pressure to 4.
Temperature (in C or F) and air flow setting, please!
9 років тому
Hi ashfaq, I have a question for you. I've been replacing lots of screens and parts on all iPhone from 2007, but I've never managed to fix a "dead" motherboard. I have an iPhone 5S which started having problems with the sim. It would occasionally say "No SIM card installed". After some days it said "no SIM card installed" all the time, no matter how many reboots, change of sim, reinstall of firmware I did. After that I tried to fix it by opening it and make sure everything was connected properly, and then second problem came. The charging dock didn't work anymore. Sound from headphone worked, speaker worked. Only the charging didn't work. So I changed the headphone, power connectors cables in hope that it would fix it, but with the new cables it was still not charging or showing any sign of life. My question is this then, what do you think might be the problem. Since watching your videos you've done in the past in guessing it's the pm ic chip that is dead. But what about the issue with the sim card? Thank you in advance, keep up the good work. Regards from Denmark Francesco
***** I have no idea mate, he seems to upload these videos with no explanations at all. Though his video editing and quality skills have gotten better, we are still clueless on small details, no idea on what temperature he uses, what kind of flux, nothing. Don't get me wrong, he seems skilled, but that's about it.
9 років тому+1
I remember seeing a comment he did (one of the fews) where he actually said about the flux and temperature. But anyways to me it's no use, cause I do not have the equipment to fix this and neither the skills. (Looks like you need a pretty steady hand and a good magnifying glass) Thanks for the reply mate
Hello Ashfaq, I'm very impressed with your knowledge and soldering skills. How did you acquire this knowledge and what type of training would you recommend? I just recently opened a Computer and Cell phone repair shop in the USA. Thanks, Manny
Hello dear, How are you? I have an issue with my iphone 6 plus, is runing good when I charge the baterry but out the motherboard with a tester of batteries, but when I connect the usb cable to charge the phone normally is not charging and in the screen of the iphone I couldn't see any simbole of charging phone, I test the flex usb charging and it's working good, because it arrives 5.1 V to the flex cable but when i conect the flex cable with the motherboard of my iphone 6plus the V that arrives to the battery is 0.24v wich chip has the issue?, I oppened the motherboard and I see all the chips but i couldn't recognize the issue chip of all them, so can you help me please?
+Pero it's better to preheat the motherboard till 100 degrees and then set your heater on 330 and set air pressure on 2 or 3 and you should keep check the IC till it's ready to remove and you have to do it qiuck
will this also work for a iphone 6 plus? i have one but it doesnt do any thing complete dead and the previous owner said she left it plugged in over night charging with a cheap after market charger and in the morning it wouldn't turn on or do anything i have also tried plugging it in my computer to see if it reads it but nothing at all
+DEEP FIX how can you tell? like test it to see which one it is? im a little confused but from your experience what most likely is it the pm ic chip or the u2 ic chip just from the information i have given you the iphone was left to charge on a cheap charger over night and in the morning the phone was completely dead doesn't do any thing like i have said before i have tried every thing i have replaced the charging port to see if that was the problem but nothing so then i was like the lcd must be dead i tried a different one and nothing and then i tried to see if it was a battery problem by booting up the phone with out a battery just the charger and nothing and then i plugged the phone into my laptop to see if it would read it but nothing its completely life less and how much do you guys charge to do the job? and thanks
This is another board because before testing with another lcd the swipe to unlock shows in arabic but after testing with another lcd it shows in english how this can be possible
Q1: Can anyone tell me, the type of liquids been used in entire video & please briefly tell what is the purpose of each liquid ? Q2: how much the heat should be to de-attach the PM IC? I'll be thankfull Adeel from North Wales UK
Fantastic work, I was just wondering if you can perhaps shot a video on how you can remove iCloud from iPhone 6, just like the iPhone 5 tutorial. Thanks much big fan.
i have a problem with an iphone 6s, changing the display i saw a little bit of smoke near a display connector and now i have no image and iphone doesn't turn on only 2 vibrations after connecting the charger
hi thanks for this video is very intersting, i want to ask u ,this part that have changed that caused error 50 if we want to restor the iphone , because i bought an used iphone 5c in ios 7.0 and i obseved that all time in search to network carrierr so can u help me if u have resolotion for this problem thanks friend
This phone was for training video only, no? The phone has a short on VCC_MAIN because C5202_RF is bad--look at burn marks. It didn't need PMIC change. So many phones are ruined by people who follow and just think "no power = I should change PMIC" Still love your skills, thanks for sharing :)
+iPad Rehab Probably checked the voltage out Jessa direct from pmic is bad for cpu gpu etc and the input voltage is fine indicating faulty pmic I did spot water damage at pmu desense cap C5203_RF I doubt he would change the pmic without good reason unless he's just showing off lol.
I don''t think he is a showing off type. Check out his other videos. The main thing is he doesn't even use high end tools like Jessa. I am not trying to put Jessa But this guy is really inspiring.
That was sarcasm he's highly skilled. i personally use thermo couples for everything take no risks, this guy has a feel for it you can see him prodding components to make sure the board has reached temp efficient technique it's like art and his timing is perfect.
.
Yea very true.
Hi Jessa !
I was actually looking for that Chinese dudes video to see his diode measurement map he was using. Wrong video.
firstly, for the original PM IC (never reball before) if you hot till the solder can come out like that for sure the CPU will over hit. second, the new PM IC if you are not reball before put in it is very high chance to damage CPU. and at last, before check with other LCD it was arabic language and after that it became english.
First I thank you for watching our video and you post your questions or doubts in brief.changing the language is not a big deal.
I wanna make you clear that,if you didn't do something it doesn't mean someone can't do that work .
Do you think all our videos are not genuine?if you can check them all.
accept the opinion to be good for later better than you deny it. I dont know, event dont care where you are but one thing for sure that i did iphone 6 more than times you eat per day. Br!
+DEEP FIX you can have genuine videos but this is not one of those because you burn the digitizer chip control
+Mr Chu I think you should make a real video :)!
+Julio Osilia fully agree this is BULLSHIT.....they dont even use heat seal to shield other parts, just highly unprofessional
Hi i usually repair iphone screens etc never went to that that extent working with the circuit board but im interested to know what your actually replacing and what materials you have been using, Thank you ?
hey,
two questions :
1. what is the temperature of the heat gun ?
2. after the soldering you are using DVM to measure impedance or short ? and what are the points on the board to do it, beside the gnd of course?
what is the product used in 0:15 and 1:00 and 2:00 , this is identical products ? is flux ?
I replaced the screen in my iPhone 6. The CPU and Home button got really hot so I disconnected the batter. The phone will not turn on again and is not detected my iTunes. Do you think the PM ic is the culprit?
Hi Deep, what is the flux/raisin you used to take out/loosen the damaged pm chip? Is it the same flux for soldering and desoldering? Thanks
How do you know whether the ic is shorted or one of the surrounding smd caps? What temp did you use for removing the chip? Thanks
Can you please help me... after removing ic chip or any other, you have
to clean that small (round circle) solder pins on motherboard...How to
clean them without damaging the motherboard? I tried it once but i
pulled the copper from the motherboard, basicly ruined it. Do i have to
preheat the motherboard and then try with soldering gun and solder
wick? What i did was putting soldering paste....using soldering gun over
wick and trying to remove the extra solder from motherboard...the
effect was clean motherboard but also pulling some small copper pins and in that way destroying the motherboard. Thank you in advacne for help...
hello
how are you please am asking about charging problem on iphone 6 I changed u2 ic ,USB control ic and change any part on charging area but dos not working (The device charging when it shut don
how do you get replacement components? and how do i know which ones to stock for my repair shop
is there a fix for the replacement home button replacement? if you replace the home button(touch id) the iphone becomes a brick when you try to update
amazing ,thanks for this, but how did you find the problem is the PM ?
Azubyk Samuel who asked ?
Sorry for my english but how it is you must change pm ic and not the component u2, do you have a tester
How do you find out if the PMIC and screen need replacing if water damaged, I have two iPhone 6 and Samsung s6, both water damage both with not turn on?
I have an iPhone 6 - it doesnt appear on any computer using any apple lightning cable - it only charge once connected. I am sure it's not the cable nor the pc because i tried another iPhone 6 and it works.. Could it be my data terminal of my iPhone 6 is busted? (not the charging terminal) pls advise
when you repaired this device was it water damage? water indicator seems red to me
One question, what video camera do you use for the video? Thanks.
Hello, I have an iPhone 6 that its CPU gets very hot when plugging to power. Does this Power Management IC fixes the problem or no ? Help please
hey my iphone was water damage and i could not restore it now. I brought it to repair shop and they said, might a flash storage problem, so how can I fix this?
Hi I have an iphone 6, the device no charger and no power . Amper consumption is 0.006 . Can you give me an idea of what is the cause?
Was that electrical glue you used to hold the pm in place?
Me puede colaborar con qué temperatura trabajas la estación.
what are you doing with the negative and positive clips?
Hi DEEP FIX. i have an iphone 6 which died after getting hot. now it doesnt turn on and when i attach battery and hit power button, the cpu gets hot until i remove the battery. which ic should i replace. the pm ic or u2?? please let me know, i need your help
Hi, what nozzle size, hot air temp, and pressure do you use?
Hello how is called the heater you use and where can I buy it ?
i was wondering what kind of solutions you used to removed the old chip and for the new chip?
Nice demo like always. So, the VBAT was in short? How you know in avance the issue is the PM IC and not the charging IC or some other one?
Nice one... we have a 5s here ,suddenly went mad. only logo comes on sometimes red lcd,then goes off and then on again etc ... :/ any advice?
Hi, How did You know that's big power management ic? There is small pm ic as well. How to determine which one needs to be replaced?
You will find out which part needs changing by the power it receives OR lack of power depending on the component. You will need a multi meter and an independent power supply to test out the different amps and volts of the components. Plus a schematic (circuit diagram) comes in handy.
Hi, THanks for Yor response. When I attach multimeter this way as You show in the video at 3 min 35 sec I get no beep and it only shows 301 continuity at the multimeter display. Does that mean that it's the big pm ic that needs to be replaced?
Is there a chance my ic is bad due to water damage. It's been cleaned. It got hot before dying
How did you recognize that PM IC must be changed ?
hey what kind of fluid do you use ,where can i buyy it
I have a question, can I get my memory back even if the phone won't turn on anymore or if it doesn't work at all?
What type flux you use? So easy to remove...i try to remove pm ic..so hard..it have glue ..at point solder..
Sir I have a iPhone 6 which is dead I have shown that phone to my other repairers but each one said that it can't be repaired. Would you please help me with it.
where can I get replacement ic chips? and what does th letters pm stand for? and do you ever reball any ic's? and if so
where can I get deal with a company who will have these chips as soon as they become available. .Any information you can give me would be helpful at this time. Thank You very much .
pm stands for power management
Apple/Dialog 338S1251-AZ Power Management IC
what temperature & air flow you are currently use?
hi I did exactly the same thing but it did not work? What is the problem ?
Ashfaq can you please tell me what kind of flux used , thanks and good job
Each time I see you perform a smartphone IC swap, I wonder how do you know that it's correctly positioned. Contact pads are minuscule and precision is critical.
Sir after ic removed your used cleaning items name pls tell
what is the paste you use between ic and logicboard?
my phone 6plus 64gb problematic on the motherboard. Can it be replaced with motherboard that I will buy in lazada. Will it later run smoothly just by replacing the motherboard only?
I have an iPhone 6 as the battery discharges very fast , because I changed the battery and connector will be the problem , or know tell me which defective IC.
I have a situation like this I have a show, referring iTunes only when connected device gives me an error .... Where can I find
you
iphne 6
can i check out with a multimeter if the power chip works or not?
Please sir, could you help me diagnose my hardware problem? I replaced the battery and after one week I forgot to recharge it because it was stuck in 100% most of the time and it suddently turned off. After that it won't go beyond the apple logo boot, it vanishes and reboot. I tried recover it on iTunes and after sending the firmware it reboots and the apple logo appears with the progress bar but it turns off (slowly vanishing) and reboot itself to the iTunes connect logo. I will replace the IC but there is the tristar (U2) and the power management (U7) I don't know which of them i should replace.
hi,
Great videos, could you tell us what kind of solder paste are you using when removing ic and where to order it.
Regards
Hi, I saw your video from Chile and I would like to ask you if you know where I can buy the icepower for the iphone 6 thanks
For the love of God. Please, tell me where I am able to purchase those PMIC's.
Thanks! few more questions. What temp are you preheating at? Also, what temp for hot air? This is all lead free right? What is your success rate with this? I just want to get an idea of the melting. Points. I prefer to use a k-type thermocouple with digital thermometer to assist in regulating the heat. Thats how I do it with my bag rework station for bigger bgas
You can purchase it on online.
DEEP FIX Hi love your videos excellent stuff what you do. I'm new to all the rework. I my self have a hot air station. And I was wondering what temperature you use to remove and to install the chip and at what air flow rate would you recommend may I ask .Thanks in advance
安德鲁+摩尔 这个要看使用的拆焊台,如果是直风的拆焊台,拆IC也要看IC的大小,iPhone6的电源IC,拆解温度330度,风速4档,一定要均匀加热!
Hello sir, my iphone 6 is dead, changing lcd and battery is not working, but when i connected it on itunes it recognize my phone but nothing shows on the screen just black, what is the problem? Pm ic or u2 ic?
Hello. Good Video. I have a few questions. What is the right temperature in C? What is right airflow level?
Would you give some advice?
Ok in next video we are going to provide audio and can find your answers in it...
that would be very fine
th2010 , if you look at his other videos you can see the following settings
temperature is set to 380
Air flow is set to 5 when he removes the chips, and by the air flow sound you can hear when he is putting the chip back, i would guess he lowers the air pressure to 4.
perfect. thx
Hello,
What temperature you use to remove components?
Temperature (in C or F) and air flow setting, please!
Hi ashfaq, I have a question for you.
I've been replacing lots of screens and parts on all iPhone from 2007, but I've never managed to fix a "dead" motherboard.
I have an iPhone 5S which started having problems with the sim. It would occasionally say "No SIM card installed".
After some days it said "no SIM card installed" all the time, no matter how many reboots, change of sim, reinstall of firmware I did.
After that I tried to fix it by opening it and make sure everything was connected properly, and then second problem came.
The charging dock didn't work anymore.
Sound from headphone worked, speaker worked. Only the charging didn't work.
So I changed the headphone, power connectors cables in hope that it would fix it, but with the new cables it was still not charging or showing any sign of life.
My question is this then, what do you think might be the problem. Since watching your videos you've done in the past in guessing it's the pm ic chip that is dead. But what about the issue with the sim card?
Thank you in advance, keep up the good work.
Regards from Denmark
Francesco
***** He doesn't reply to anyone
What's the point putting videos up then...
***** I have no idea mate, he seems to upload these videos with no explanations at all. Though his video editing and quality skills have gotten better, we are still clueless on small details, no idea on what temperature he uses, what kind of flux, nothing. Don't get me wrong, he seems skilled, but that's about it.
I remember seeing a comment he did (one of the fews) where he actually said about the flux and temperature. But anyways to me it's no use, cause I do not have the equipment to fix this and neither the skills. (Looks like you need a pretty steady hand and a good magnifying glass)
Thanks for the reply mate
GrimeReaperMan new sim tray and good solder skills.....7/10 on the difficult meter
Sallam brother where do you get parts from Alibaba?Are the original or copy?
I have a question, how is name that liquid wich you put on main board, brown..??
Soldering Flux
donde consigues los procesadores que le cambias?????
Hi friend. Wy you replace the component? I don't see on description!
That large soldering tip is just crazy. Where did you find such a tip?
hi where you get your IC's n chips plzz from Mauritius...
hey what kind of glue you use?
How did you know to replace that specific part ?
Hello Ashfaq,
I'm very impressed with your knowledge and soldering skills. How did you acquire this knowledge and what type of training would you recommend? I just recently opened a Computer and Cell phone repair shop in the USA.
Thanks,
Manny
hi, may I know where to purchase the PM IC in Singapore?
جزاك الله خيرا *****
ماذا تنصحني ان اردت ان اتعلم صيانة الاجهزة المحمولة ؟
tenho um phone 6 que não da liga só esquenta trocando esse chip resolve ?
what name of gel/glue for install that ic/chip?
Hello dear, How are you? I have an issue with my iphone 6 plus, is runing good when I charge the baterry but out the motherboard with a tester of batteries, but when I connect the usb cable to charge the phone normally is not charging and in the screen of the iphone I couldn't see any simbole of charging phone, I test the flex usb charging and it's working good, because it arrives 5.1 V to the flex cable but when i conect the flex cable with the motherboard of my iphone 6plus the V that arrives to the battery is 0.24v wich chip has the issue?, I oppened the motherboard and I see all the chips but i couldn't recognize the issue chip of all them, so can you help me please?
0% expensive equipment
100% pure skills
How do you know this IC is going to be a problem?
How many air and hit , which smd use etc.
hi brother. what temperature do u use for remove pm ic on iphone 6. ???
+Hossein M did u find out what proper temperature is to remove?
+Pero it's better to preheat the motherboard till 100 degrees and then set your heater on 330 and set air pressure on 2 or 3 and you should keep check the IC till it's ready to remove and you have to do it qiuck
HI SIR DO YOU HAVE YOUR OFFICE OR ONLY STORE FOR REPARING THANKS
WHAT IS THE NAME OF THAT HEATING MACHINE AND WHERE CAN I FIND IT?/
will this also work for a iphone 6 plus? i have one but it doesnt do any thing complete dead and the previous owner said she left it plugged in over night charging with a cheap after market charger and in the morning it wouldn't turn on or do anything i have also tried plugging it in my computer to see if it reads it but nothing at all
It might be U2 ic problem
+DEEP FIX how can you tell? like test it to see which one it is? im a little confused but from your experience what most likely is it the pm ic chip or the u2 ic chip just from the information i have given you the iphone was left to charge on a cheap charger over night and in the morning the phone was completely dead doesn't do any thing like i have said before i have tried every thing i have replaced the charging port to see if that was the problem but nothing so then i was like the lcd must be dead i tried a different one and nothing and then i tried to see if it was a battery problem by booting up the phone with out a battery just the charger and nothing and then i plugged the phone into my laptop to see if it would read it but nothing its completely life less and how much do you guys charge to do the job? and thanks
+orlando lopez +DEEP FIX i would also like to know... changing the chip is fine for me.. but i don't know how to determine which is faulty
Did u change PM or u2?
after change iphone is turn on?
my phone complete dead.
Which type of microscope do you use??
What brand and model?
This is another board because before testing with another lcd the swipe to unlock shows in arabic but after testing with another lcd it shows in english how this can be possible
how you shipped the support for mother board please ?
Disculpa a cuantos grados colocas la calentadora
anyway to find iPhone 6 plus logic board gb by reading the chip?
Hola ashfaq donde puedo conseguir los repuestos IC
Q1: Can anyone tell me, the type of liquids been used in entire video & please briefly tell what is the purpose of each liquid ?
Q2: how much the heat should be to de-attach the PM IC?
I'll be thankfull
Adeel from North Wales UK
hello would you be abule to fix our iphone 6 for us its completly dead and a cost please thanks
whats the funtion of this integrated circuit?
What is heat degree you are using
Hey I've recently purchased an iPhone that's locked by iCloud would this help ?
+Caraymeon Taylor www.etradesupply.com/?acc=8c19f571e251e61cb8dd3612f26d5ecf good luck
+Stephen Rimington could you do this for me if so can I contact you ?
Bhai ap khawiya knsa use kr rahy ho ?
hi can i send you my phone for repair plz it went dead on me 2 days ago plz and tell me how much it will cost
Fantastic work, I was just wondering if you can perhaps shot a video on how you can remove iCloud from iPhone 6, just like the iPhone 5 tutorial. Thanks much big fan.
at what temp u heat the ic from the station
what is that thing your holding that is copper on 1:11
my iPhone 6 as motherboard problem ever one said no use where should I buy the motherboard plz help me
Nice job!! Is there a way to remove iCloud by changing a chip on logic board?
kes type ka glue aap use karty hu?
It's gel flux mate
i have a problem with an iphone 6s, changing the display i saw a little bit of smoke near a display connector and now i have no image and iphone doesn't turn on only 2 vibrations after connecting the charger
maybe you short-circuited the display connector. if the damage is on the motherboard, you'll have to replace the entire board.
hi thanks for this video is very intersting, i want to ask u ,this part that have changed that caused error 50 if we want to restor the iphone , because i bought an used iphone 5c in ios 7.0 and i obseved that all time in search to network carrierr so can u help me if u have resolotion for this problem
thanks friend
+DEEP FIX
where u buy these pieces?