[WM-06] How to make DIY Horn Speaker / DIY 혼 스피커 WM-05 만드는 방법
Вставка
- Опубліковано 11 вер 2024
- Introduce how to make a DIY horn speaker enlosure "WM-04".
- 1-way : use 6.5/8" fullrange
- 2-way : use 6.5~8" woofer and driver/tweeter
- reproduce emotional sound with ample volume
DIY 혼 스피커 인클로저 WM-04를 만드는 방법을 소개
- 1웨이 : 6.5/8" 풀레인지 사용
- 2웨이 : 6.5/8" 우퍼와 드라이버 또는 트위터를 사용
- 풍부한 음량을 가진 감성적인 사운드를 재생
Nice looking and modern design.
Great job !
You always encourage me. Thanks a lot.
One again Beautiful work. They sound lovely.
Thanks a lot. Have a nice day.
Very nice project, well done.
Thank you for short, but beautiful comment. Have a good weekend.
매우 은은하믄서 똘망하고 그리고 편안한Bass 트위터만 조금더 보강하믄 멋있고 쾌청한 만들고 싶은 소리통
아름다운 댓글 감사합니다. 70~13000hz의 주파수대역을 가진 알니코 유닛이라면 별도의 트위터가 필요없을 것으로 생각되니 참고하시기 바랍니다. 좋은 한 주 보내시구요.
clever dickens!! hes made an open baffle horn speaker.
Excelente trabajo !, muy bien logrado.
Thank you so much. Have a good day.
Muito bonito.
OBRIGADO pelo vídeo.
Wonderfull kim
Thanks a lot. How have you been? Is everything okay? I'm fine. I hope you always have nice days. Bye.
@@weklangspeaker2054 hi kim. Thank you ..yes all ok ..here in italy lock down for covid..the life is changed...write me in mail for comunicate
@@mrtube-z3v South Korea's economic situation is very hard too. Covid 19 smashed our econonic and personal life.
Over five people can' sit at the same place and at the same time.
Excellent :)
Thank for your encouragement. Have a nice day.
멋집니다! 나도 함 제작해봐야겠네요... 20평 작업실에서 오디오 감상도 병행하고 있거든요, 영상 잘 보았습니다. 🙏🏻
좋은 글 감사드립니다.
행복한 주말 보내십시요.
Amazing🎉🎉🎉 thx for share
Those curved petals (a central horn and side niches) do not work without a horn. This is like a folded twisted Voigt pipe from rear and a horn from a front. Your box sounds like a box. Sorry about that. Because your niches just resonate at some certain frequency like boo-boo-boo. They must be opened into a horn.
Beautiful!! but what is acoustic board? Why is it needed?
This enclosure is made of 12mm birch plywood because it tends to reprduce satisfied sound.
Great video thanks
Thank you so much. Have a beautiful day.
mr.weklang i suppose AD9710 then?when can we see a horn design for 9710s big brothers AD5200m and the last 1968 version AD 1255/m7 its more power handling than the 9710 and more efficient and greater frequency response in the bass and the highs.
Thank you for your good information. This enclosure can accept all kinds of fullranges in the world.
@@weklangspeaker2054 mr.weklang i have seen your full range video of 8 inch drivers worth listening to low price middle price and high price there you list philips 9710 as middle price over 500 US$ but i can buy them in holland for 100-120 euros for an excellent pair also listed was magnavox p232 listed in the lower price range up to 500 us$ i just gave 4 of those away to a man who bought my magnavox field coil 15 inch speakers from 1950 there are chinese buyers here in netherlands who search for full range speakers and export i think to asia and make a big profit ad5200m and ad1255/m7 are 12 inch full range speakers alnico built for vacuum tube amplifiers they are just bigger ad9710s and have a floating copper ring inside the voice coil that in the ad1255/m7 keeps the impedance across the frequency range at a fixed 7 ohms and the 68/69 9710/m7 also does this here the 5200m are worth about 300-350 euros for a nice pair and ad 1255/m7 around 300 euros for a nice pair .so i ask is there a buisness oportunity for me in the netherlands to find nice full range speakers,mostly from philips and export to where you are for a good profit there is a set of speakers here for sale and the highest bid is 150 euros not sold yet for philips 9803 klang film speakers that is vintage cinema 10 inch loudspeakers the highest bidder is tran jong the owner of the speakers wants more tran jong is a chinese bidder in the netherlands. I think tran jong wants to buy for 150 and sell to you over in asia for 600 us$ or more.
@@christopherhines2718 Above all, thank you your proposal. However, I am not a dealer selling speaker unit but a carpenter for the people wanting an enclosure. I buy only 3~4 vintage units from a Korean dealer a year. I deal with all kinds of vintage units imported from all over the wirld.
Ayway, thank you for your suggestion again.
@@weklangspeaker2054 mr.weklang you are 100% one of the good guys,I myself are also a carpenter,but at this moment I dont have a fully equiped workshop,My training was for Bench joiner,mortice&tennon,and dovetails 5 years school,it suprises me how you are so generous,to show us in the western world,How to make iconic horns,and back loaded horns,Maybe in the next few years I have money from my mother,and i can rent a workshop in the netherlands,and do exact the same as you do,thank you very much, I hope You can come with more designs so i can also build them and make a buisness from it for my old age,I think I am around the same age as you,but from england,with corona virus I have not so much work,but when things change for me,i will become a patron of your channel,like i will pay something per month I hope you are in south korea and not north korea,from holland a thousand thankyous to you,mr.weklan :)
@@christopherhines2718 I am sure that you will build up a wonderful workplace someday. I traveled your country 35 years ago. Unfortunately, I stayed just 3days. I want to visit your country with my wife again. You live in one of the beautiful countries in the world, don' you? I live in South Korea adhering to Liberal Democracy. Thank you for your encouragement. May you have gorgeous time every day.
!
Nice
Thank you so much.
Nice video. Please tell me, in the last picture with the front view, i see no more acoustic boards. You take them off ? Thank you !
I didn't take off acoustic boards. It's enough for my fullranges. If you need more acoustic boars, you should make the front board wider when you start to make it.
nice
Thank you so much. Have a nice day.
Как в бочке)) неужели вы настолько глухие, что не слышите?))