Thank you for producing these videos. For some manufacturers this information is really hard to find for techs and engineers looking to get more training (without paying thousands) and learning in the field. Yours is one of the most in depth and entertaining channels I have found. So again thank you and keep it up!
Thanks Sir,For such a best video on kuka with best explanation 👌.....Sir,My Request to you please make video on kuka controller internal and external connections,wiring,connectors working. It may help to find any error regarding connectors. Waiting for your reply and video on it🙏 Thanks 🙏
wow .. what great videos and awesome explanation .. I have a doubt . When i do a program through a WV then i try to transfer changes ( not deploying ) but the icon is in grey color .. I cant transfer changes .. WHat should i do before that ?
@@FutureRoboticsChannel the icon says "transfer changes to the controller" where I transfer the programs and variables that I make in WV to controller. 🙂
Amazing video! Whenever I set the active controller, I get this message - "Error in DTM EtherNet/IP: IP source address configured in the DTM is not available on your system. To be able to go online, please correct this in Settings user interface." I double checked and the IP address looks right... any ideas? Thank you!
Few things I would check first: Did you download the project form the robot ? Are you using correct version of WorkVisual (same or higher version that the project that you are trying to open) ? Is you DMT catalog updated ?
Hi! Thank you for the tutorial! I am hitting refresh in Work Visual but it says : "no cells found". Could you point me towards the direction of a solution?
Hi, i have Kuka robot KR C4, Now i have any prolem with connect KR C4 with error code KCP FSOE : FSOE reset command received and FSOE reset during data receive. Could you give me know how to fix it! Thanks a lot.
@@Fine_i_set_the_handle They look the same, but VRP requires you to have the actual robot. OfficeLite creates a robot KCP on your laptop, without an actual connection to a real robot.
Not sure if I understand correctly, but you can create a backup of the robot remotely (download a project trough WoV) and work on it on your laptop and later on download it back to the robot. You can change pretty much everything using Work Visual
@@FutureRoboticsChannel No, it's already installed, but I can't see the graphical interface, which allows me to select what I need? in orange edit if I can do it but WV no
@@FutureRoboticsChannel no, i want to configure the tech keys and my inline forms to view in the kcp, i have an idea it's by modifying the smarthhmi.exe file, but i'm not sure.
you mean you change your laptop IP to match the KCP IP ? You can always change that IP after you will turn the robot on and it will try to connect to KCP after some time you can open the HMI (use the AUTO/MANUAL key like you'd change from AUTO to T1) and in one of the meus you can re-assign the IP
Thank you for producing these videos. For some manufacturers this information is really hard to find for techs and engineers looking to get more training (without paying thousands) and learning in the field. Yours is one of the most in depth and entertaining channels I have found. So again thank you and keep it up!
Thank you for the feedback ! I really appreciate it :-)
Excited to see further videos...
Thank u,that is what we are waiting for
Thank you.. This tuturial was just what I needed.
Hello. Thank you for your videos. I have one question: why the IO mapping button is gray and i cant press on it?
You need to activate the controller
Thanks Sir,For such a best video on kuka with best explanation 👌.....Sir,My Request to you please make video on kuka controller internal and external connections,wiring,connectors working. It may help to find any error regarding connectors. Waiting for your reply and video on it🙏 Thanks 🙏
Please can you tell me where in workvisual, I can found the optional package that a project use ? Where is the window ?
Thanks a lot !
are you asking maybe about Option Package Management that's under Extras?
@@FutureRoboticsChannel yes thanks a lot
Thank you for the videos… if possible make more videos on work visual.. explaining how to create mada files.. how to use safety areas.. etc
Yes, I'll continue Work Visual as well as KUKA programming tutorials :-)
Please post next video...we are awaiting
Thank... Congratulations..
Vielen Dank
wow .. what great videos and awesome explanation .. I have a doubt . When i do a program through a WV then i try to transfer changes ( not deploying ) but the icon is in grey color .. I cant transfer changes .. WHat should i do before that ?
Could you explain what does transfer changes mean ? Is it when you are trying to send project to the robot ?
@@FutureRoboticsChannel the icon says "transfer changes to the controller" where I transfer the programs and variables that I make in WV to controller. 🙂
Amazing video! Whenever I set the active controller, I get this message - "Error in DTM EtherNet/IP: IP source address configured in the DTM is not available on your system. To be able to go online, please correct this in Settings user interface." I double checked and the IP address looks right... any ideas? Thank you!
Few things I would check first:
Did you download the project form the robot ? Are you using correct version of WorkVisual (same or higher version that the project that you are trying to open) ? Is you DMT catalog updated ?
Mulțumim!
Thank you for your support !
Hi! Thank you for the tutorial! I am hitting refresh in Work Visual but it says : "no cells found". Could you point me towards the direction of a solution?
maybe the IP range of your Ethernet card and robot does not match?
Also try connecting directly to KLI, do not use the port that's on the cabinet door
@@FutureRoboticsChannel thank you so much! In the end it was that I didn’t change the last bit of the IP. Thanks again for the tutorial!
Hi, i have Kuka robot KR C4, Now i have any prolem with connect KR C4 with error code KCP FSOE : FSOE reset command received and FSOE reset during data receive.
Could you give me know how to fix it! Thanks a lot.
Thanks for the video from kuka robot, kindly give us a video on safe move , soft move configuration on abb robot....
Yes, I'm planning to add those videos in the future
Can you share the kuka simulator in a virtual machine, for learn a lot
KUKA Sim has 30 days of trial, you can download it form official KUKA website
Thank you
okay but im more interested in the pendant you have open in windows what program is that
OfficeLite
@@FutureRoboticsChannel it's not VRP?
@@Fine_i_set_the_handle They look the same, but VRP requires you to have the actual robot. OfficeLite creates a robot KCP on your laptop, without an actual connection to a real robot.
tell me if I can create an image of the controller and program it remotely from the robot, remotely
Not sure if I understand correctly, but you can create a backup of the robot remotely (download a project trough WoV) and work on it on your laptop and later on download it back to the robot. You can change pretty much everything using Work Visual
where we can get this virtual remote for teach pad
It a software called OfficeLite:
www.kuka.com/en-us/products/robotics-systems/software/simulation-planning-optimization/kuka_officelite
I am ruble
I am a made in Bangladeshi
I operate and maintain Kuka robots
Can I get your help?
Sure, please send me an email at:
info@f-robotics.com
How to take pendent Screenshot in Pendrive
what about kuka simpro 4.0, is it free??
there was a 30 days trial, but I'm not sure if KUKA is still offering it
hey good job, I have a problem, I could not activate my User Tech in worvisual, could you help me with it?
Are you asking about KOP installation?
@@FutureRoboticsChannel No, it's already installed, but I can't see the graphical interface, which allows me to select what I need? in orange edit if I can do it but WV no
@@aaroncarcamo8435 I don't fully understand the question, would you like to see the KCP ?
@@FutureRoboticsChannel no, i want to configure the tech keys and my inline forms to view in the kcp, i have an idea it's by modifying the smarthhmi.exe file, but i'm not sure.
@@aaroncarcamo8435 I think in order to modify user keys you need to have UserTech installed
Is it free to download work visual software
Yes, Work Visual software is free to use, you can download it from official KUKA website
i want ask change help support programing.
Feel free to contact me at: info@f-robotics.com, or even better you can schedule a consultation here: f-robotics.com/consultation
i think i have lock my robot by chaning my IP any chance you can help
you mean you change your laptop IP to match the KCP IP ?
You can always change that IP after you will turn the robot on and it will try to connect to KCP after some time you can open the HMI (use the AUTO/MANUAL key like you'd change from AUTO to T1) and in one of the meus you can re-assign the IP