Chris, Thank you so much for the flash on my 19 Busa. I tore that PC5 out and installed the spare ECU with your awesome tune in it with the MR12 on B mode. Anyway Sir, Mine had that on off throttle too with the PC5. So not only did it gain 15 ponies and some torque but smoothed it out all around! I went riding with my buds over Memorial weekend and they were impressed with the gains! They said my Peregrine Falcon was flyin !!!! U DA MAN
Nice work! Hey, I sent my buddy Wesley to you, he's got an appointment for a tune on his R1M tomorrow... Pull about 10 degrees of timing out of his bike so that mine is faster than his? :-)
I agree. It made a difference especially when cornering. Bike didn't nose dive and felt much more planted after the tune was done. I enjoyed a lot of back road riding later that day and the day after.
on these new bikes it seems its almost a given. You need it to make the bike do what you are telling it to. I dont want my bike doing 10% throttle when im telling it go 75%.... That could easily be just as dangerous as allowing someone 100% all the time. Bike manufacturers need to quit it with the nanny bs.
My 2022 Gen 3 Busa does the EXACT same thing. Its very abrupt just like that with tiniest bit of throttle. I cannot wait until you can flash the ECU Chris! See you in person as soon as it’s available!! - Amy
Excellent work as always 👍 The marble trick is genius 😉 I love the exhaust sounds with out the fireworks 😃 We wait your cracked ECU for the new Hayabusa 😉
Chris, so good to see everyday, real road bikes being improved with the time taken to explain. I can't stand the grandstanding, "I've got the secrets" type of people that won't share. This video was uplifting.
Chris!!i checked the ecu flashing service on your website and I found that you raised the price for 265$,I remember it was 200-215,was that due to inflation??!!
I'm sure the owner of this bike likes his exhaust note. It's a bit different. I wonder if he considered a Yoshimura exhaust before purchasing the TB Exhaust.
Not going up gears no. It's about timing, the moment you let off the gas the gearbox has no load on it so can shift up smoothly (once you get the hang of the timing) Going down gears the gearbox works the same way, however as the rpm of the motor will increase on downshifting the clutch is used to make this smooth and extend the life of your gearbox and chain.
A bike gearbox works differently than a car. There are no synchronizers in a bike gearbox. They use a dog-engagement setup. Essentially all a quick-shifter does is momentarily cut power. There is nothing mechanically different in the gearbox of a bike equipped with a quick-shifter. If you don't have a quick-shifter you can accomplish exactly the same thing by rolling off the throttle. If you slightly pre-load the shifter with your foot it will "magically" click up when you release the load on the gearbox. I do find however that MOST bikes I've had prefer the clutch for the 1-2 shift where you have to go through neutral.
@@TEAMWRIGHTEOUS that’s kinda what I thought but wasn’t sure if it was at all different on that bike than others. Like if it’s something you can do on one bike but not other bikes
Yep, I'm sure Chris wouldn't notice if it was running poorly. He hasn't tuned many of these new fangled Hayabusas...I'm sure he appreciates your expertise.
I agree with everyone else about the sound of the exhaust. Sounds like it’s under water. Like the Jetsons tried putting an aftermarket exhaust on their flying car. Bike looks awesome though
Popping is great ..Lets people know your there !!!
Chris, Thank you so much for the flash on my 19 Busa.
I tore that PC5 out and installed the spare ECU with your awesome tune in it with the MR12 on B mode.
Anyway Sir,
Mine had that on off throttle too with the PC5. So not only did it gain 15 ponies and some torque but smoothed it out all around! I went riding with my buds over Memorial weekend and they were impressed with the gains! They said my Peregrine Falcon was flyin !!!!
U DA MAN
Nice work! Hey, I sent my buddy Wesley to you, he's got an appointment for a tune on his R1M tomorrow... Pull about 10 degrees of timing out of his bike so that mine is faster than his? :-)
😝
a lot of people forget about tuning for rideability ! nice work once again 👌
900 miles well spent
I agree. It made a difference especially when cornering. Bike didn't nose dive and felt much more planted after the tune was done. I enjoyed a lot of back road riding later that day and the day after.
on these new bikes it seems its almost a given. You need it to make the bike do what you are telling it to. I dont want my bike doing 10% throttle when im telling it go 75%.... That could easily be just as dangerous as allowing someone 100% all the time. Bike manufacturers need to quit it with the nanny bs.
All these video’s are nice but when are you going to the track? Im ready to see you racing
popping sound for life, and fire balls lol
I had the exact same bike ...should never have sold it lol black and red combo is a beauty
My 2022 Gen 3 Busa does the EXACT same thing. Its very abrupt just like that with tiniest bit of throttle. I cannot wait until you can flash the ECU Chris! See you in person as soon as it’s available!! - Amy
Biggest fan Powamoto never misses a dyno tune especially on A Busa 🤟
Gotta love the pops
My ECU will be at your shop Thursday brother Z900 baby can't wait!!!!!!!!
I love the popping on deceleration.
Excellent work as always 👍
The marble trick is genius 😉
I love the exhaust sounds with out the fireworks 😃
We wait your cracked ECU for the new Hayabusa 😉
Bruh I love that sound and the deep pop when you switch gears
I love the popping and flames 🙌🏽🔥 I can't wait to come home from this deployment and bring my bikes to you
10:55 When the temperature outside drosp another 2-3 degrees it will hit that 175 easy. People forget that number changes with the weather lol
Sounds like it's running on 3 cylinders or has a bad ignition coil or clogged injector. Doesn't sound very crisp.
Yes, something doesn’t sound right for this kind of bike
The flow of the sound just sounds off and out-of sync with the revs that's putting out. ...something isn't right 🤔
I ran in to rad rock at cycle gear in Springdale Ar today. Pretty cool guy and the Busa sounds damn good!
SWEET SWEET VIDEO !! LOVE IT! THANKS FOR SHARING !!
Snap! Crackle and pop!
Heck yeah great video. Been waiting on another video. The pop is a good way to make make your mufflers louder, I think it loosens up the packing
Just had my MT-10 tuned by him. It was a great experience, I got amazing gains and I would highly recommend 👍🏻 Thank you Chris!
two brothers/dual exhaust is trash
i have same bike with more modifications hoping to send it to you soon
Chris sell him an exhaust and some plugs. Sounds like splitfires on a gs250
Lol! They're definitely not sSplitfires. I can tell by the sound.
I like the popping sound my Mustang is tuned and does that. I’m waiting until Chris does a video on it and I’m going to tune my 2022 Hayabusa
Love the popping
Love the poping for sure
Awesome trick for the popping, sounds like my 2 cylinder Ninja 400
love what you guys did with my flash.. But for me I dont care for the popping
My 2000 Busa has the same problem, way too twitchy on and off the throttle, cold weather and cold pavement it’s frightening 😮
I thought the Pair valve pulled air from the box and out it into the exhaust header.
Hate the dual exhaust on busas
i want the pull down. my typhoon is wicked heavy but i don't want the snatchyness at every gear.
Two brothers 🙈 wouldn't insult my lawnmower with one ruins the bike
Don't like 2 brother's either
Chris, so good to see everyday, real road bikes being improved with the time taken to explain. I can't stand the grandstanding, "I've got the secrets" type of people that won't share. This video was uplifting.
I love the popping! You flashed my 2021 1000R and it doesn't pop at all. I was kinda sad! 😔
Did you specify to enable decel fuel cut?
Some bikes won't do it mine didn't either zx14 I know the feeling 😔
I like the popping , cool. Can you get a M109R to pop?
Chris!!i checked the ecu flashing service on your website and I found that you raised the price for 265$,I remember it was 200-215,was that due to inflation??!!
yesterdays price is not todays price. i paid 281 just do it before it go up again
That’s awesome
No Popping
I absolutely hate TBR exhaust systems, they sound like a$$
Sounds like a TL R engine not right
Exactly. It doesn't sound like a straight 4 at all. 😳
All kinds of gains
I thought the pair valve feeds air into exhaust , not gasses into airbox
Get him a Brock’s and a flash, should fix everything
Love the popping. Just not on that bike lol 😅
What did you use to make them things happen did you have to put a commander on it how did you adjust it
What’s up with the gloves CM$?
#MarbleMod baby 🦾
What’s up bro
I'm sure the owner of this bike likes his exhaust note. It's a bit different. I wonder if he considered a Yoshimura exhaust before purchasing the TB Exhaust.
I don’t like the way the busa sounds in this video at all.
I thought that bike made more horsepower too
Ok sorry to ask the stupid question but after the last view vids but is a clutch really not needed?
Not going up gears no.
It's about timing, the moment you let off the gas the gearbox has no load on it so can shift up smoothly (once you get the hang of the timing)
Going down gears the gearbox works the same way, however as the rpm of the motor will increase on downshifting the clutch is used to make this smooth and extend the life of your gearbox and chain.
A bike gearbox works differently than a car. There are no synchronizers in a bike gearbox. They use a dog-engagement setup. Essentially all a quick-shifter does is momentarily cut power. There is nothing mechanically different in the gearbox of a bike equipped with a quick-shifter. If you don't have a quick-shifter you can accomplish exactly the same thing by rolling off the throttle. If you slightly pre-load the shifter with your foot it will "magically" click up when you release the load on the gearbox. I do find however that MOST bikes I've had prefer the clutch for the 1-2 shift where you have to go through neutral.
I have a question for you I have a second generation 1300 2007 Hayabusa two brothers exhaust I like to quiet it down about three or four notches
If it has a cat delete, replace it. That will get you 3-4 notches.
Chris …sounds like a Kawasaki Er6n …😂😂😂
What are the chances of that marble getting sucked down through the hose and causing real problems? Is that even possible?
Not at all. It goes to the pair valve. Worst that can happen is it go further towards the pair valve.
@@TEAMWRIGHTEOUS that’s kinda what I thought but wasn’t sure if it was at all different on that bike than others. Like if it’s something you can do on one bike but not other bikes
Might wanna check the license plate bolts looks like it's gonna fly away lol
with out doubt i absolutely hate popping sound...seriously hate it.
No pops
Do you have ECU flashes for Agustas or Ducati's?
Wouldn't care what it sounds like since I don't have the luxury of owning a bike 😩
NO POP !!
My 2013 alt bike busa made 198hp. Wtf is wrong with that 2011?
I wouldn't put 2 brothers on nothing in the world I thought they stopped making that garbage
🤣🤣🤣🤣🤣
Where is this guy located at? How far I gotta drive?
South Carolina.
his addy is on his website, some prices n shiz too, check the description for a link.
NO POPS
can the decel fuel option be done on my 02 gsxr 1000
Can't tune through the ecu on those.
Something is wrong with that Busa that is not a real number for that machine
What number would be closer ?
That’s the problem you riding 900 miles 😂😂
That Busa sounds really bad need plugs
Yep, I'm sure Chris wouldn't notice if it was running poorly. He hasn't tuned many of these new fangled Hayabusas...I'm sure he appreciates your expertise.
✌️💪
Moore mafia 💪
Suzuki power 💪
Your customer is going to love the ride back home 🏠!!
I sure did enjoy it on the way back. Enjoyed many roads while out that way too.
I agree with everyone else about the sound of the exhaust. Sounds like it’s under water. Like the Jetsons tried putting an aftermarket exhaust on their flying car. Bike looks awesome though
I love the way my busa sound with the popping
Great work
Good work on smoothing that baby put. Cant wait for my 21 cb1000r to get this treatment
First, send me some merch