even though a lot of things were unhooked from those cars, it might have been a good idea to at least bring a code reader with you that might have shown things to check instead of blindly just going from one thing to another. the scan tool would show why the car went into limp in mode. check the codes first, then check the freeze frame screen. Clear the codes, then see what comes back. Just some suggestions. even something as simple as a gas pedal sensor or even a throttle position sensor can make the car go into limp mode.
Excellent thoughts dude. I couldn't agree more... I also know the later models have a rev limiter with no load. You can put it on the floor and it will only rev to about 3000rpm.
Question: Are they not allowed to run a different steering box to change the steering ratio? That many turns to overcorrect seems a little much to me. Seems easy to lose track of the steering position, even if you had a piece of tape at 12 ‘oclock still wouldn’t help
Good stuff even if neither made it --- but had they mmhmmmm!!! More has to be done for these cars to last. Nice job guys (all of HTF). Think a CrownVic won it ... that's pretty cool. Let's Gooooooooooooo. Be Safe
❤ I'm sorry that y'all had bad luck with the crown vic's. But for the laps made y'all looked like y'all were having fun. Better luck next time and Good Luck in the Enduro race 🏁🏆🏁💞🤗💞🏁🏆🏁🥇
Put rebuilt motors in them. Do not paint them so it doesn't draw attention to them. Those cars need a gear change , storage and then raced. It only gets better the more you race them . Crown Vic racing is getting big in the south. A nice break in the " off " season. 😂
I think Joshua is least impressed with Jonathans smart allack comments that probably make him feel like hes not an equal....Always something smart to say.
You guys do a great job with respect to your racing efforts but allow me to make a comment: In life, if you strive to do many things you end up doing nothing correctly. I say that because I have followed you from the beginning of this journey and always been very happy for all of your success but with all of your recent ventures it appears that the Late Model part is not holding up to your past success. IMO, concentrating on DLM solely should get your organization back to the winners circle. Again, this is just an opinion and without more internal knowledge of your total plans I should just leave my comments here. Best of luck in 2024; I will be waiting for your weekly updates.
Best part, Jordan saying "I'm going to get me a hotdog!"
First thing I told my wife about after the video😂. That guy is funny.
Glad to see Joshua back behind the wheel even though it was short lived. Be cool to see him and Jonathon racing more!
Had a blast with y’all! Cars looked good. Hate yall didn’t make it. Hope to race with yall again sometime soon!
Slide job in a crown vic... AWESOME moment. This looked fun. old school :)
i wonder if josephs car ran hot and went into limp mode..
Just bought my first crown Vic for racing so I hope to see you out there soon
Gearing plays a huge part in these. That 2.73 open diff is wimpy compared to a 3.55 tracloc cop car rear or a 3.73 tracloc rebuilt replacement
even though a lot of things were unhooked from those cars, it might have been a good idea to at least bring a code reader with you that might have shown things to check instead of blindly just going from one thing to another. the scan tool would show why the car went into limp in mode. check the codes first, then check the freeze frame screen. Clear the codes, then see what comes back. Just some suggestions. even something as simple as a gas pedal sensor or even a throttle position sensor can make the car go into limp mode.
Excellent thoughts dude. I couldn't agree more... I also know the later models have a rev limiter with no load. You can put it on the floor and it will only rev to about 3000rpm.
Oh man I didn't know you guys raced so close to the house . I want to see the next one !
Cant wait to see the Enduro video... gonna bring back the old memories of enduro racing the Chevy Cavalier
What are the plans for the crown Vic and marquee, fix and race again or sell,maybe scrap.
Need quicker steering. How can we get that ?
Where is the demolishing derby at?
I haven't laughed that much from an HTF video in a long time 😂 Looks like you guys had a great time! GIS in 2 weeks....
Glad to see my taxi on here ol charlie Meinders had it screaming
good job, you did the best you could. Maybe you can go through the engines and transmissions before you race again!
You guys gave it a try.
My son and I had a blast, got to trade some paint with actual famous people
Y’all are great guys
Back to the shop and figure out game plan for next race. Next year rebuild kit for tranny. And salvage that motor if possible.
Question: Are they not allowed to run a different steering box to change the steering ratio? That many turns to overcorrect seems a little much to me. Seems easy to lose track of the steering position, even if you had a piece of tape at 12 ‘oclock still wouldn’t help
Can’t change the steering
Good stuff even if neither made it --- but had they mmhmmmm!!! More has to be done for these cars to last. Nice job guys (all of HTF). Think a CrownVic won it ... that's pretty cool. Let's Gooooooooooooo. Be Safe
Need to have the fan on a switch and have it on constantly!
❤ I'm sorry that y'all had bad luck with the crown vic's. But for the laps made y'all looked like y'all were having fun. Better luck next time and Good Luck in the Enduro race 🏁🏆🏁💞🤗💞🏁🏆🏁🥇
Hard to beat the South Carolina Taxi cab! She's a bad ole girl!
Should have had Cleetus out there with you all .. looks like tons of fun
Cleetus is busy flying blackhawks lol
Love the Feger Baby Shark shirt!! 😂
How much are the tshirts
That's a bit different of the Light model instead of
Probably could have used some old fire extinguishers to get the mud out of the radiator.
Some chicken wire woulda done good wrapped from hood down to radiator support...
JOSH BLEW THE RADIATOR OH MY IT WAS WATCHING THE RACE LIKE PURE STOCK DAYS when I WAS A KID
Put rebuilt motors in them. Do not paint them so it doesn't draw attention to them. Those cars need a gear change , storage and then raced. It only gets better the more you race them . Crown Vic racing is getting big in the south. A nice break in the " off " season. 😂
Good to see ya all have fun. LoL 😂😂😂😂😂😂😂,
Needed to move the transmission cooler up so it could get air
Hopefully y'all take weeks off ever now and then to have fun like this. Just to enjoy it.
No thermostat means no cooling. Water doesn’t sit in the radiator long enough to cool. Drill a hole in it if ya need to but don’t remove it.
You need to cut center out of thermostat, they will overheat running no thermostat.
That is some good stuff fellas! 😂
No quick steer in them there things
Alex Vance is in the 395 car behind Joshua in the 110 car he is the small town guy who won it and lives close to me
Next time you guys should put a better motor in them
Them four took their chip out lol 😆.
Needed to protest that first heat race. The winner in the red car ran away and hid
Well, dang it. Joseph may have got a win.
I would pull the coolant temperature sensor and see what happens
Dang I hate that for Joshua and Joseph. I was really was hoping Joshua was going to get to run more laps. Lets getem fixed and better luck next race!
Looks like beer:30 just arrived,lol 21:05
Why didn’t you show the laps before. That show how the 4 got the lead. IYKYK
Why not take the radiator from Joseph’s car? At least you could get one of the cars running.
It’s the cheapest form of racing these days next to the American truck series up in Michigan
I hope Jordan enjoyed his hot dog! 😂
I would say this is good entertainin content, the wheel movement is insane compare to a late model 😂
Damn FORDS !!
Could of took the radiator out of Buford and stuck it in Marquis
Cool 😎
I’m just saying cleetus McFarland needs to get here asap lol
JJ is bookin'. Edit: Was....
Delaware restarts are stupid.
Great video tho
Lucky the fords made it 2 laps! As to why most people run chevy for racing. Should be Caprice and crown vics!
Still supporting baldy
I think Joshua is least impressed with Jonathans smart allack comments that probably make him feel like hes not an equal....Always something smart to say.
Love those driving gloves
😂😂😂😂 you must not be a twin?? And it’s about par people getting offended on the internet these days..
Ya gotta realize that they are brothers. Smart alec comments started from day one. Go HTF JIM
All brotherly love, c'mon man :)
Big smile on Joshua's face :)
Love watching HTF. Although Jonathan makes it hard. Always stating the obvious and something smart to say
Shadow and josephs wife should’ve been the drivers would have been much more fun to watch the girls participate
👋
I'm dropping the hammer no your not
Go sprint now that's raseing
Take the thermostat out of marqueece!
You guys are NOT mechanics! 😮
You guys do a great job with respect to your racing efforts but allow me to make a comment: In life, if you strive to do many things you end up doing nothing correctly.
I say that because I have followed you from the beginning of this journey and always been very happy for all of your success but with all of your recent ventures it appears that the Late Model part is not holding up to your past success. IMO, concentrating on DLM solely should get your organization back to the winners circle.
Again, this is just an opinion and without more internal knowledge of your total plans I should just leave my comments here. Best of luck in 2024; I will be waiting for your weekly updates.
Ford : found : on: racetrack: dead
Got em
Late models are a thing of the past... Crown Vics are here to stay