Workshop Camera | Part 2
Вставка
- Опубліковано 29 вер 2024
- Today is Part 2 of the workshop camera gantry series. In this episode, I'm discussing
- Building the dolly to ride on the Track / I beam
- Stabilizing the Track / I beam laterally
Check out Starbond's super glues here and thank you for your support!
www.starbond.c...
🔔 SUBSCRIBE: goo.gl/pOkvJR
🎬Full Playlist of the Camera Gantry Series below:
• Workshop Camera Gantry...
🗂Full SketchUp File of the entire system:
workshopedits.com/s/Gantry-Camera-System.skp
Written article coming once the full project is completed!
🌳 MATERIALS (for the Part 2 project)
1 x 4’ x 8’ x 3/4” Plywood
1 x 2’ x 4’ x 3/4” Plywood
Rollerblade Wheels + Bolts for Roller Blade Wheels
1/4" Lag Bolts + Screws + Washers
24 x Flat Large Washers
2 x 3/8” x #16 Lag Bolts (4” long)
2' x 3/4" All Thread
2 x Screw Nuts for 3/4" All Thread
3" Wood Screws
2 x Door Hinges w/hardware
2 3/8” x #16 Wing Nuts
🗜TOOLS
SAWSTOP Table Saw: amzn.to/2Luh91q
Miter Saw: amzn.to/2YXsyRi
Combo Power Took Kit: amzn.to/2q1l5wn
Brad Nailer: amzn.to/2Uz6tCI
Router: amzn.to/2p15eiC + Router Table + Rockler Router Bits
Tape Measure, Speed Square, T Square
Drill Press (mine is an old Delta model)
📽 FILM / EDIT EQUIPMENT:
Panasonic G7: amzn.to/2DA7fuS
Rhino ROV Pro Camera Slider: amzn.to/2XE7Ce3
📲 Check me out on SOCIAL MEDIA!
INSTAGRAM: workshopedits
FACEBOOK: workshopedits
TikTok (I know...): workshopedits
Written Article:
www.instructab...
Thanks for watching!
Zach
Nice job mate, it’s coming along well!
Thanks! Almost finished it today. Really coming together!
Coming together. One to part 3.
Hey Zach. Thanks for taking the time to share this, really enjoyed the series. You have me thinking about something similar using my existing roof I beam... peace, Bongo.
I’m glad! I think everyone could use a modified version for their space!
@@workshop_edits well, everyone who bothers with this UA-cam nonsense ;) Thinking about it it would be kinda cool to get a shop vac attachment on there...
The system you are using is similar to many of the cheap 3d printer hot end carriages. An Eccentric nut is a good way to adjust perfect tension between the carriage and beam.
Wow very nice bro 👌👌👌
Wow very nice bro 👌👌👌
Thanks!
I LOVE IT, Ba e smecher baiatul(romania translade)