With the failover trunks set to the other PBX, and vice versa, could the routing be set in an indefinite loop back and forth if both carrier SIP trunks failed?
How to enable automatic synchronization status function on PBX status in dashboard. (UCM 6208 Program 1.0.19.21). a SIP account is registered but few minutes later the sip account rejected. How to resolve the issues ?
thanks sir, it's very helpful ; In this video you've used the lan network , what about the ip public address, coz i dunno how to know the ip public of my ucm, i tried with domain name but it didn't work
Hi Do the users need to dial 9 before desired number to make calls on the remote UCM? Or the 9 digit included is only an internal mechanism between the UCMs to differentiate DID and trunks?
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
With the failover trunks set to the other PBX, and vice versa, could the routing be set in an indefinite loop back and forth if both carrier SIP trunks failed?
how do you setup the extension range....must the change be done on all other settings in that space
We need the GWN7000 Setting for The same Connection
Hi, how to configure the sip trunk if only SBC IP, WAN IP, and pilot number are the details provided?
We have 3 UCMs , 2 UCMs already interconnect through Lan to Lan VPN , how to connect 3rd one
Very Thanks
Thank you, its very useful
How to enable automatic synchronization status function on PBX status in dashboard. (UCM 6208 Program 1.0.19.21).
a SIP account is registered but few minutes later the sip account rejected.
How to resolve the issues ?
new subscriber ty
Is it possible to have 2 GVC behind VPN with 2 peered UCM? is there any other things to do to perform videocalling?
Should extensions also able to ping each other or only ucm?
thanks sir, it's very helpful ; In this video you've used the lan network , what about the ip public address, coz i dunno how to know the ip public of my ucm, i tried with domain name but it didn't work
houssem eddin Kechkar use a VPN between your sites and then Use the lan address
I want , analoge trunk of UCM_A will land to ring group of UCM_B
Hi
Do the users need to dial 9 before desired number to make calls on the remote UCM? Or the 9 digit included is only an internal mechanism between the UCMs to differentiate DID and trunks?
@Nathan Sharp thank you... your videos are helping me a lot 😀👍
No need depends on your route
has anyone here ever hocked up a goip sim router to a ucm 6208 for some reason i cant get blue no mater what i do
Shift command 3 on mac
what a terrible sound!!!