The only RS3 channel who doesn't drive it on video 😆 Great info though, interesting 👍🏻 Something strange is going on with the windscreen glass though. Very weird. Keep enjoying it.
I put an Akrapovic with a sound kit on mine then out of curiosity I scanned the car for faults and found 16, 4 of which were related to the exhaust which I was expecting. I’ve done some tests without the sound controller and the other faults come back so it looks like at least with my car the ecu thinks there’s faults. Everything does work on the car and the faults are anything from rear camera, seat switches, climate control, master cylinder etc but like I said everything does work so I feel there is some sort of intermittent communication issue with the CAN system. If you get a chance run a scan on yours and see if you have any faults logged
Did not find any errors 😄 got it scanned on the service and was there as the guy was resetting the service stuff. I asked him if anything popped up and I only had a registered missfire from a bad spark plug. But all plugs where replaced st the service so thats gone 😄
I would also take the BTM exhaust system for the RS3 into consideration. Imo it sounds more like the Sport Quattro S1 back then. But I'm myself are not sure yet whether to take the Stoll are BTM exhaust. Looking forward to your next video
BTM is at the moment not available with all the paperwork needed for Switzerland. Stoll is sold under APR which is a bit of a bigger player in the tuning scene to say the least. But again personal prefrence. Totally get why some one would opt for BTM
Endless - MX87? I still thinking about HJS downpipe vs Stoll exhaust… downpipe is much more expensive, but I really like the sound. There is a new wheel coming from Motec - MCR1 Forged One with the same weight. Will be a bit cheaper and is a bit „cleaner“ with less carve-outs.
Yes I actually did drive a GTI a couple of times snd they are not comparable really. The RS3 is really another level. If you would compare it to golfs, then the golf R has some similarities but again the RS3 is in its own league 😄
bravo odlican komentar, ja sam presao 13000km do sada imam 3 ili 4 ostecenja na sofersajbi koja za sada resavam sa reparacijom ali definitivno je upitan kvalitet. Da li si razmisljao o 18 col felnama i da li imas informacije koje bi felne mogle odgovarati jer sve vreme dok vozim imam strah da ce i mala rupa na putu biti katastrofa za ove 19-ske sa napred svega 80mm visine gume. Pireli gume sam vozio 3 ili 4 puta na raznim automobilima jedno znam da ne bih nikada vise kupio taj brend koji je usput sa nepravdano visokom cenom. pozdrav iz n.sada dragan kovacevic
Trenutno planiram ostati na 19 inch felne a sto se tice kvalitetni feluga za koje ne moram mijenjati vecinu guma, samo sam nasao wheelforce, concaver i ABT felne. Ostalo mi se nije dopalo sto se tice design ili kvaliteta
I have a black sedan and I was thinking of changing the colour of the wheels to bronze, I’ve seen some pics of these in bronze and they look really good, it brings out all the angles nicely and they almost look like a totally different wheel
@@knight2425 I agree, that let's say modern black Wheel for me is not the best-looking color for RS3, bronze looks far better. My question is what do You think about 18inch wheels to get a little more comfort and do You have any informations can the 18 inch fit to rs3 8y.
@@dragankovacevic5066 I’m quite happy comfort wise with mine when it’s in comfort mode and I didn’t buy it specifically looking for comfort so wheel size I’m happy to stick with for now
Is the car still covered under waranty if you put on an exhaust and an intake? Living in switzerland aswell.
The only RS3 channel who doesn't drive it on video 😆 Great info though, interesting 👍🏻 Something strange is going on with the windscreen glass though. Very weird. Keep enjoying it.
ua-cam.com/video/UfIfjxvXN7M/v-deo.htmlsi=krESVGVywY0GaPqr&t=549
@@DinoDrives Thx for this 😄
You can get front discs from girodisc or DBA.
Thanks for the Updates, realy enjoy your Videos!
Glad you like them!
Great video Dino 💯 So much useful information about owning an RS3!
Glad it was helpful!
I put an Akrapovic with a sound kit on mine then out of curiosity I scanned the car for faults and found 16, 4 of which were related to the exhaust which I was expecting. I’ve done some tests without the sound controller and the other faults come back so it looks like at least with my car the ecu thinks there’s faults. Everything does work on the car and the faults are anything from rear camera, seat switches, climate control, master cylinder etc but like I said everything does work so I feel there is some sort of intermittent communication issue with the CAN system. If you get a chance run a scan on yours and see if you have any faults logged
Did not find any errors 😄 got it scanned on the service and was there as the guy was resetting the service stuff. I asked him if anything popped up and I only had a registered missfire from a bad spark plug. But all plugs where replaced st the service so thats gone 😄
very informative video, keep it up
I would also take the BTM exhaust system for the RS3 into consideration. Imo it sounds more like the Sport Quattro S1 back then. But I'm myself are not sure yet whether to take the Stoll are BTM exhaust. Looking forward to your next video
BTM is at the moment not available with all the paperwork needed for Switzerland. Stoll is sold under APR which is a bit of a bigger player in the tuning scene to say the least. But again personal prefrence. Totally get why some one would opt for BTM
Endless - MX87?
I still thinking about HJS downpipe vs Stoll exhaust… downpipe is much more expensive, but I really like the sound.
There is a new wheel coming from Motec - MCR1 Forged One with the same weight. Will be a bit cheaper and is a bit „cleaner“ with less carve-outs.
Yesss MX87. I would say start with the stoll, because the downpipe with OE exhaust won“t bring you that much in my opinion.
Hi mate, did you every try a Golf GTI MK8? How does the RS3 compare? I'm planning to do an upgrade... Really good videos BTW, keep going!
Yes I actually did drive a GTI a couple of times snd they are not comparable really. The RS3 is really another level. If you would compare it to golfs, then the golf R has some similarities but again the RS3 is in its own league 😄
bravo odlican komentar, ja sam presao 13000km do sada imam 3 ili 4 ostecenja na sofersajbi koja za sada resavam sa reparacijom ali definitivno je upitan kvalitet. Da li si razmisljao o 18 col felnama i da li imas informacije koje bi felne mogle odgovarati jer sve vreme dok vozim imam strah da ce i mala rupa na putu biti katastrofa za ove 19-ske sa napred svega 80mm visine gume. Pireli gume sam vozio 3 ili 4 puta na raznim automobilima jedno znam da ne bih nikada vise kupio taj brend koji je usput sa nepravdano visokom cenom. pozdrav iz n.sada dragan kovacevic
Trenutno planiram ostati na 19 inch felne a sto se tice kvalitetni feluga za koje ne moram mijenjati vecinu guma, samo sam nasao wheelforce, concaver i ABT felne. Ostalo mi se nije dopalo sto se tice design ili kvaliteta
I have a black sedan and I was thinking of changing the colour of the wheels to bronze, I’ve seen some pics of these in bronze and they look really good, it brings out all the angles nicely and they almost look like a totally different wheel
@@knight2425 I agree, that let's say modern black Wheel for me is not the best-looking color for RS3, bronze looks far better. My question is what do You think about 18inch wheels to get a little more comfort and do You have any informations can the 18 inch fit to rs3 8y.
@@dragankovacevic5066 I’m quite happy comfort wise with mine when it’s in comfort mode and I didn’t buy it specifically looking for comfort so wheel size I’m happy to stick with for now
Hi , ein schönes KFZ✌️Bzgl. dem Frontsplitter, hast Du diesen selbst montiert, oder was hast Du ggf. bezahlt? VG & Danke f. Deine Antwort
Montieren lassen. Arbeit 100CHF und Eintragung 100CHF. Splitter mit DTC 420CHF.
@@DinoDrives OK thx...aber ne Menge 'holz' dafür 🥴