VTAC Board: Build Your Own
Вставка
- Опубліковано 9 лют 2025
- From law enforcement to 3-Gun, the VTAC board is a staple because it's a fantastic training tool. This month, we walk you through the process of building your own collapsible VTAC board based on a great set of plans we found. Make this your garage project for the end of 2019.
Connect with JP Enterprises:
www.jprifles.com
jprifles
/ jprifles
jprifles
You could also use “C” clamps 🗜 to hold the vertical supports to the barricade.
Also, if you're going to do this at home look up how to plunge cut with a circlcular saw and it will save you a bunch of time while doing this.
Bud, THANK YOU for posting this. I'm not a carpenter and had no idea what a plunge cut was. But looked it up, watched a couple videos on it, and it ABSOLUTELY saved tons of time making these VTAC barricades. Thanks man! 👍🏻
You guys are awesome! This is gonna be my next project, thank you so much for this video!
Our pleasure!
Dude built this whole thing with a holster on, what a Chad.
JUST THE VIDEO IVE BEEN LOOKING FOR ! thanks guys
Outstanding video, appreciated
After you finish it. Out sealer on them to help protect them if left outside
Thank you very much for the video!!
Very helpful, thanks for making this video.
Do you have a link to the exact plans for this build?
Back when lumber was cheap
I know, right?
While you can use C clamps as noted below, I would use the bolts, washers and wingnuts as shown in the video. What I would do differently would be to use 3 wood working clams [Bessey for example] to hold the up rights in position while the drilling was being done. Clamps for that purpose are far more reliable at preventing movment than a pair of hands.
Next, I would be inclined to use a stout steel piano hinge to connect the 2 halves of the actual barricade with # 10, 3/4” wood screws. You could also place the piano hinge between the two halves of the barricade as opposed to on theinside of both pieces and use 1.5” screws. This mehtod however would require a strip of 5.8” thick x 2” wide as a reinforcing board on each side of the barricade both above and below the piano hinge to prevent the plywood from splitting out from the screws going into it vertically. Either way would spread the strain of people using the barricade over a much broader surface making the assembly more durable.
As for washers, 2 fender washers under both the bolt heads and the wingnuts would increase the durability of the barricade as well...
Video is appreciated on how to build it but without measurements or a link to the actual instructions. It's kind of hard to built this if there is no measurements given on where to cut or how to mark up the plywood so it can be cut
have you heard of this new website called "google?"
At 2:50 that’s a very dangerous place to put your hand while cutting, not saying I don’t ever do it but you really shouldn’t put your hand anywhere near that guard
I made my "feet" stick out beyond the braces ~6" and put a hole so they could be staked down
link for the instructions you keep referring to
not to be a smartass, but google is an amazing tool...
holy shit it’s rick grimes
Another option is to get a Portable Tactical Simulated Barricade (PTSB), which is lightweight, collapsible, foldable and can fit on the backseat of your car!
This is the exact type of build I was looking for. Thank you.
@@icarusarms3152 Nice!
Kinda painful to watch - great with guns, not so much power tools. Good video nonetheless.
Lmao
Ryobi tools? 😂
dude takes rifle to test ports, proceeds ignore the handguard and rest rifle directly on the barrel...
let me know how those groupings go.
good vid. completely backwards from lamb's barrier