Nice overview. I'm finding the app and the 30M very user friendly, but I haven't found any info on where the DB/Volume levels of the individual channels should be, relative to the "Main" volume. (eg: Main up higher than individual channels, or vice-versa) I'd love any counsel, info or links you might have. Thx in advance for sharing!
Thanks for the setup video. It's very helpful. Greatly appreciate any help on my new EV30M situation. Issue: Bluetooth connects and device pairs with my iPhone. But when I try to stream audio (from the phone) sound doesn't come out via speakers. (EV30M monitor window shows Bluetooth sign and a solid C.) Not sure what I am doing wrong. Thanks for any help.
Have one EV30 and looking to add a second one. Would be interested in the setup for two units and how that works with the app. Can't seem to find that anywhere on UA-cam. Thanks!
Hey thank you for your tutorial. I have a question?. I have this unit and I play saxophone ..I will be performing at a wedding next week .What do you suggest my settings should be set on ( etc.reverbs comp..mids treble ) . Any help will be appreciated . Thanks
Thanks for the demo: 1. Running my keys into 5/6 do I set mono ON or OFF 2. As stated it does, please explain how to save mixer settings 3. When saved, how do you recall? 4. What is the diff of 2.4.2 (184) or (ad53b24). The right channel on your presentation was very low. Hope someone can help me with the 'save' question as I keep trying :)
Hello and thank you for this video! Ive noticed that when I hit a preset, (vocal, acoustic guitar, percussion, etc..), the channels EQ doesnt change at all. For example, I ran through ALL of the presets on channel 1, and nothing was altered as far as channel 1s EQ settings. Is this right? How exactly is the preset loaded into the channel?
I think it does change, but subtlety- and it doesn’t move any of the ‘dials’ on the app - so not sure what exactly is being set. I guess I’ll read more manual pages -
I have looked all over for information on how to connect two of these via bluetooth. I can get each speaker to work alone, they are both connected to the app and are both connected for audio in the bluetooth of the device but only one speaker or the other will work at a time. Any information on what I'm missing would be appreciated. Great content.
Hi! I’m a jazz vocalist and use this tower on many gigs. I recently had it outside and after a break something changed and I never touched it. It was a hot day. I’ve since gotten home and I realize that I’m getting no sound from The sub…all sound is only coming from The tower. Please help me.
Jeremy, can't get mine to connect. App looks different than yours (says connect, not apply). Confirmed Bluetooth connectivity on the unit (pair/control) but still doesn't connect. My 30m selection on the connect screen has a red x through it. Got it paired but not connected. Any hints?
Jer, how do I mix and apply effects, and saving them and programming them just using the built-in mixer on the EV 30M.. I've been looking all over UA-cam for tutorials on that and I can't find any
@@djjermusic thank you so much for your help. I am using the app now, but sometimes I can't sync it up with the 30M.. sometimes when I turn off the system and back on it will pair up but sometimes it won't and I'm not sure why
Hello, Thanks for the demo, I have an issue where I've put it on mute using the app and wasn't able to take it off. It happened once on channel 1 and then Master. When I hit the button it looks like it's going to switch because of the color change of mute button but then bounces back on mute. After trying a few different things I ended uninstalling the app and was able to use the system again. Now I'm nervous it will happen during aive show. Any suggestions? Thanks.
I guess I haven't seen the issue before. I would say if it happens during a gig you should be able to go back to the unit and do whatever you need to do in case of an emergency. Hope that helps.
Hi! I’m trying to hook up my in ear monitor system through the mix out on my EV 30m. For some reason it’s not acknowledging that it’s receiving any sound from the mix out. Any idea what I might be doing wrong?
I don't have an iPhone but I think it would react like any Bluetooth connection. The more you have the phone open that is what actually drains your battery.
I get BLUETOOTH FAIL, there's no Control Pair Option i'm guessing that this is because the firmware came after.. i'm on 1.02 I guess i'll try to update it goodluck!
Oops Control Pair is in a Submenu Under Bluetooth. I got the App to recognize the Speaker, But now the regular bluetooth pairing from my phone is not working...?
Use an XLR cable to connect from the XLR main out of the first unit into channel 5 of the second unit. Set the first unit to left and the second unit to right.
Very helpful I am setting mine up now Much Appreciated!
Nice overview. I'm finding the app and the 30M very user friendly, but I haven't found any info on where the DB/Volume levels of the individual channels should be, relative to the "Main" volume. (eg: Main up higher than individual channels, or vice-versa) I'd love any counsel, info or links you might have. Thx in advance for sharing!
Very helpful, thank you!
Thanks for the setup video. It's very helpful. Greatly appreciate any help on my new EV30M situation. Issue: Bluetooth connects and device pairs with my iPhone. But when I try to stream audio (from the phone) sound doesn't come out via speakers. (EV30M monitor window shows Bluetooth sign and a solid C.) Not sure what I am doing wrong. Thanks for any help.
Have one EV30 and looking to add a second one. Would be interested in the setup for two units and how that works with the app. Can't seem to find that anywhere on UA-cam. Thanks!
Very helpful thank you!
Very welcome
Hey thank you for your tutorial. I have a question?. I have this unit and I play saxophone ..I will be performing at a wedding next week .What do you suggest my settings should be set on ( etc.reverbs comp..mids treble ) . Any help will be appreciated . Thanks
Rotate your phone to landscape for a traditional fader view! Its great!
Thanks for the demo: 1. Running my keys into 5/6 do I set mono ON or OFF 2. As stated it does, please explain how to save mixer settings 3. When saved, how do you recall? 4. What is the diff of 2.4.2 (184) or (ad53b24). The right channel on your presentation was very low. Hope someone can help me with the 'save' question as I keep trying :)
Hi! Thanks for a great video!
I have a question about phantom power - how do you engage it? Thanks again!
I will reply here as well. Phantom is automatic with these units.
Does the soft (app) mixer provide faders that don't affect a channel pre-fade gain structure?
Hello and thank you for this video! Ive noticed that when I hit a preset, (vocal, acoustic guitar, percussion, etc..), the channels EQ doesnt change at all. For example, I ran through ALL of the presets on channel 1, and nothing was altered as far as channel 1s EQ settings. Is this right? How exactly is the preset loaded into the channel?
I think it does change, but subtlety- and it doesn’t move any of the ‘dials’ on the app - so not sure what exactly is being set. I guess I’ll read more manual pages -
If I bought 2 EV 30M's, would the app allow me to pan Left/Right some of the input? Is the AUX going to the 2nd unit?
An Aux can go to a second unit if you would like or you can signal through to send the same mix to the second.
I am intimidated by the controls on the base unit. Do I have to use any of them once the Bluetooth has activated my iPhone e EV 30 app?
Just got one for Christmas, i cant figure out how to play music through my phone on it…any suggestions ??
I have looked all over for information on how to connect two of these via bluetooth. I can get each speaker to work alone, they are both connected to the app and are both connected for audio in the bluetooth of the device but only one speaker or the other will work at a time. Any information on what I'm missing would be appreciated. Great content.
you have to connect them with an ethernet cable, I dont think bluetooth will work
Is it ok to turn up the mains volume, if you find you're not getting enough from each individual channel to get more sound out of this speaker?
Hi! I’m a jazz vocalist and use this tower on many gigs.
I recently had it outside and after a break something changed and I never touched it. It was a hot day. I’ve since gotten home and I realize that I’m getting no sound from
The sub…all sound is only coming from
The tower. Please help me.
Jeremy, can't get mine to connect. App looks different than yours (says connect, not apply). Confirmed Bluetooth connectivity on the unit (pair/control) but still doesn't connect. My 30m selection on the connect screen has a red x through it. Got it paired but not connected. Any hints?
How does one go about updating the firmware on a Evolve 50?
I just ordered the EV 30m. Just curious - is it possible to patch stage monitors into this system?
It has 1 aux out.
Can the 7 band eq be controlled on the app? If so, how do you get to that set of functions?
It can be controlled in the app from the master or aux.
This PA only works at shows with WIFI only? Or regular mobile internet and Bluetooth? As well
Bluetooth should be the way to go with this setup.
Jer, how do I mix and apply effects, and saving them and programming them just using the built-in mixer on the EV 30M.. I've been looking all over UA-cam for tutorials on that and I can't find any
Select FX and assign to the channel then use FX to adjust the amount of the effect you want. Does that help or make sense?
@@djjermusic I will try today.. is that in the mixer mode or basic..?
@@jonjeffries3265 I would recommend mixer mode to acquire more of the needed features.
@@djjermusic thank you so much for your help. I am using the app now, but sometimes I can't sync it up with the 30M.. sometimes when I turn off the system and back on it will pair up but sometimes it won't and I'm not sure why
@@jonjeffries3265 hmmm. I am not sure. Is your phone connected to any other Bluetooth devices such as watch, earbuds etc?
Hello,
Thanks for the demo,
I have an issue where I've put it on mute using the app and wasn't able to take it off.
It happened once on channel 1 and then Master.
When I hit the button it looks like it's going to switch because of the color change of mute button but then bounces back on mute.
After trying a few different things I ended uninstalling the app and was able to use the system again.
Now I'm nervous it will happen during aive show.
Any suggestions?
Thanks.
Btw it works fine every other time however the unit is new.
Thanks again
I guess I haven't seen the issue before. I would say if it happens during a gig you should be able to go back to the unit and do whatever you need to do in case of an emergency. Hope that helps.
@@djjermusic Thank you. I loaded it on to by Tablet and haven't had any issues since.
can i use external mixer?
Hi! I’m trying to hook up my in ear monitor system through the mix out on my EV 30m. For some reason it’s not acknowledging that it’s receiving any sound from the mix out. Any idea what I might be doing wrong?
If you connect a speaker from the mix out do you get audio then?
@@djjermusic thanks for getting back with me. Turns out my cable was bad. All fixed now. Cheers!
Where do I control the subwoofer in the app????
Im having trouble saving/storing presets.
Can you play music from your phone through it via Bluetooth?
Yes for sure. There are two bluetooth features. control and streaming :)
I haven't had my unit very long but the volume goes low and then goes back up to where it was. Is this an easy fix? Any suggestions? Please help!
When you say it goes low then back up, what is the scenario? Are you singing? Playing instruments, multiple channels being used? etc?
Do you find that the battery life goes faster on your iPhone when using the app?
I don't have an iPhone but I think it would react like any Bluetooth connection. The more you have the phone open that is what actually drains your battery.
Why no one on UA-cam do a volcal test with the reverb and delay .not one
Does the app allow you to save your mixes as presets?
It does, but it doesn’t let you custom label them!!! I wish it did!
@@edgar.magdiel please explain how you do that and what do you recall?
Can not get it to pair I have an android. Please help!! Thanks
Try switching on the gps and bluetooth control pairing
I am not sure why you would be having problems but I will see if EV can assist you with it. Cool?
When your demo video only has sound on the left side....
I get BLUETOOTH FAIL, there's no Control Pair Option i'm guessing that this is because the firmware came after.. i'm on 1.02 I guess i'll try to update it goodluck!
Oops Control Pair is in a Submenu Under Bluetooth. I got the App to recognize the Speaker, But now the regular bluetooth pairing from my phone is not working...?
How do you connect two 30m's together??
Use an XLR cable to connect from the XLR main out of the first unit into channel 5 of the second unit. Set the first unit to left and the second unit to right.
@@madness8556 That is correct. Does that help @robert Fair?
@@djjermusic Thankyou. If Robert wants to run a mono system, he keeps the settings in both units on L+R.
The app is a nightmare! I find myself going back to the old faithful mixer to get the best out of this speaker.
its crap that you cannot connect more than one device through bluetooth
On a gig last night and the app on my iPhone suddenly would notconnect. Panic!
There are many factors, distance, bluetooth power, etc. Hopefully you got it all going again.
@@djjermusic o figured it out when I got home. Reconnected Bluetooth via the button on the back. Which I couldn’t see in the dark at the gig.
all other companies are using latest bluetooth version where you guys are not
I am guessing new technology will be launching soon. This video is pretty old.
can you update software with old speakers i meant m30
Very helpful. Thank you!