Thank you for the info, any recommendations to install 10 feet pipe on a wall, planning to hand my Outdoor String Light from one side to the other. So looking for a good pipe brackets.
Does any body know what clamps are best to run copper lines through a home that will prevent harmonics? Especially when securing onto studs raftors etc?
I'm trying to sort out a way to mount a horizontal run of 2" PVC pipe to an exterior brick wall. None of the applications here seem to be suitable, as I need some clearance between the pipe and the wall in order to accommodate installed fittings. Any ideas?
Looking for best option to hang 3/4” air line from the bottom channel of a C-Purlin roof joist in a metal barn. Didn’t know if they made a hooked hangar and was hoping you’d show one. I’ve yet to find one anywhere. Great info though.
3:20 That's perpendicular, not parallel. It's fine, it's one of those things that a lot of people get mixed up or just sometimes say the wrong thing by mistake. Just wanted to clear it up for anybody watching that might be in the "getting them mixed up" category or "not sure which is which" category. Of course, if youtube still supported annotations (what the actual @$#%@, youtube?) this would be an easy fix. ANyway, thanks a ton for this informative video!!! It's one of those things that should be all over the internet yet somehow, it isn't. Very useful!
Thank you for this video. I needed this 🙏
The pictures of the devices in use were extremely helpful
Very grateful 🙏 for this video! Clear and concise and covers a wide array of cases // scenarios. Putting this info to use in within a few hours.
The picture examples are clutch!
Thank you for the info, any recommendations to install 10 feet pipe on a wall, planning to hand my Outdoor String Light from one side to the other. So looking for a good pipe brackets.
Great job on all your videos. Very informative and straight forward.
This was great! Thank you!!!
A 3" ABS drain slopes down 3.5' over a 4.5' span. I need to insert a wye into it. How can I support the 3" drain with that slope?
Can these supply lines be surface mounted inside a room or do they need to be boxed in?
There are no specific regulations. However boxing in your pipes would protect them against any damage.
Excellent video, great explanations, Thank you.
Super helpful! Thanks
Cleevis hangers really it’s clevis hanger .
fantastic, can't thank you enough.
Thanks man!
Does any body know what clamps are best to run copper lines through a home that will prevent harmonics? Especially when securing onto studs raftors etc?
I'm trying to sort out a way to mount a horizontal run of 2" PVC pipe to an exterior brick wall. None of the applications here seem to be suitable, as I need some clearance between the pipe and the wall in order to accommodate installed fittings. Any ideas?
Sioux Chief Pipe Titan Bracket 570 series
Thanks for sharing
We make all of these where I work. We also do the strut and accessories
Looking for best option to hang 3/4” air line from the bottom channel of a C-Purlin roof joist in a metal barn. Didn’t know if they made a hooked hangar and was hoping you’d show one. I’ve yet to find one anywhere. Great info though.
Use a Sioux Chief Touchdown 550 Series. That is if you don't mind tapping into the metal beams.
What about hanging insulated pex pipe?
Do you have samples?
3:20 That's perpendicular, not parallel. It's fine, it's one of those things that a lot of people get mixed up or just sometimes say the wrong thing by mistake. Just wanted to clear it up for anybody watching that might be in the "getting them mixed up" category or "not sure which is which" category. Of course, if youtube still supported annotations (what the actual @$#%@, youtube?) this would be an easy fix.
ANyway, thanks a ton for this informative video!!! It's one of those things that should be all over the internet yet somehow, it isn't. Very useful!
Great video!
Thank you
rad you are saying means bolt?
he meant full thread
So good
Oatey products!
value products
Good video but you forgot to include aircraft cable such as the Gripple Express Hanger
Hi i am sheet metal die maker and
All type clamp die making
Theres a difference between hangers and straps
Please get rid of that loud music at the beginning.
1:03 "two Blots"?? hah, stop reading a cue card
We have much more easier and faster to install cushion clamps. Contact me 😂