Hello Sir thank you for knowledge and expertise on this channel. I have 2008 g35x with the same issue, I tried to program used bcm using a locksmith service and her was unable to do so. The push button is stuck on lock mode with no communication from the car, any word of advice ??
@@BestCarFixes If the bcm is not program to the ecu, would it cause a no communication with the car, if yes. How would you establish communication with the bcm ??? Also I also went and replaced the steering lock module. If I send the car bcm also with the ecu and key; would Eprom programming work ???
Hello sir, just a quick question if you don't mind. Is this the same procedure for a brand new module? Or does a new module news to be configured/ flash before programming keys? Thanks
The first thing that you should do is to take it out and try to Dry it up Then put it back if is not working then look for used one it must be the same number Also remember to Program it after you install it You Need special tools to do the programming like Autel MaximIm im608 Or call a locksmith to do the programming for you Remember to clear the sunroof drainer and under Battery water drainer
thanks so much big brother 🙏 your education is making us to improve 🙏 ma Allah give you all u need sir 🙏
It's my pleasure
Ma sha Allah bro may Allah give u more success 🙌
thanks you raheem
Hello Sir thank you for knowledge and expertise on this channel. I have 2008 g35x with the same issue, I tried to program used bcm using a locksmith service and her was unable to do so. The push button is stuck on lock mode with no communication from the car, any word of advice ??
ok you must be able to communicate with the bcm and see what code is there
@@BestCarFixes
If the bcm is not program to the ecu, would it cause a no communication with the car, if yes. How would you establish communication with the bcm ??? Also I also went and replaced the steering lock module. If I send the car bcm also with the ecu and key; would Eprom programming work ???
Hello, I have g37x 2010 the bcm that came with the car is not in the car, what is the bcm number for 2010 g37x
I have a 2011 QX56, can a used BCM be programmed in my vehicle?
Hello sir,
just a quick question if you don't mind.
Is this the same procedure for a brand new module?
Or does a new module news to be configured/ flash before programming keys?
Thanks
some module if is new you must configure between manual and automatic Transmission
@Best Car Fixes thanks very much for you time.
I got it.
Hey my bcm is bad but tha box with my part number wasn’t on there what should I do
I need this done to my car im in new jersey where is your shop located
Will 608 work program g37x
hey i have the same problem how can we get in contact with you?
Hey Muhammad 2009 fx35 bCm got wet same issue , what bCm can I use n do I need to have it reprogrammed?
The first thing that you should do is to take it out and try to Dry it up Then put it back if is not working then look for used one it must be the same number
Also remember to Program it after you install it
You Need special tools to do the programming like Autel MaximIm im608
Or call a locksmith to do the programming for you
Remember to clear the sunroof drainer and under Battery water drainer
@@BestCarFixes thank you
Bro. Where’s the part number 🥴
I’m in queens
what pin calculator on your phone?
You ever found out how to find the pin
@@Zenith_elevates nah man lol they guard that shit with their life
Doesn't consult iii cost several thousands of dollars?
yes
@@BestCarFixes nice.
Where are you located?
Brooklyn ny
@@BestCarFixes name of shop?
@@BestCarFixes what's the address? I'm in queens