*_Check out the video to see how you can upgrade from the Basic Screen to the full 4x4 Info & Phone Screen. All for FREE - just 15 minutes of your time. Disclaimer: You do this at your own risk, no liability is accepted at all. Its worked for me :)_*
this is a hope to get near camera. I get a Land Rover Discovery 3 TDV6 HSE 2006. Did everything as described but couldn’t get the near camera view on the screen. Any suggestions? And after some reading here next I need the scanner IID toll for the system recognize the camera. Problems: That bluetooth scanner cost around U$650 ( US dollars today ) So I need to find some one who can have it here in Brazil. Also after cutting the middle yellow wire screen gets darker so I still need to find what should I be soldering in.
That's insane! Bought mine with "wrong" navigation, so the whole screen was pretty useless until i tried this. Can't believe how easy this was. 10-15 min max indeed! Thank you good Sir, for sharing this gem with us "low spec" LR3 owners!
Wow! Just tried this. It literally took me 15 minutes. I didn’t completely remove my unit, I just pulled it out slightly and removed the wire with the safety pin taped it up. Then refitted everything and it works! Full access to the 4x4 menu and all the other features. Very impressed!
I honestly thought this would be a load of rubbish and couldn’t possibly work, until five minute later I did as shown here and it works like it was always like that from the factory… Thank GG Aviation you are an absolute legend 🥳
I Stumbled across this video, I tried it and hooray it worked 😂😂😂😂. I think it all goes down to the simplicity of the presentation by GG Aviation even some of us who are hopeless on mechanics felt it can be done 👏🏽👏🏽👏🏽😂
Honestly i was sceptical at 1st but let me be the 1st to say I was so wrong to doubt!! 8 screws and a tweezer to pull the wire out and plugged it all back in i now have the upgrade. Cheers pal 👍👍
Absolutely in-cre-di-ble!. It works!!. From a simple 2 box old menu to a newly 6 one!. The physical buttons don't work fine now, but it doesn't matter at all with this magnificent update. Thank you very very much!
Thanks mate worked a treat! I chose to just pull back the tape and cut wire then put close ends on each wire as I couldn't get the wire out of the connector and I was getting pretty rough with it and it's quite fragile.
Yeah what a good bit of advise! I didn’t even need to take out the radio just moved the facia forward and got the updated screen! Thanks a lot so much better!
Thanks GG Aviation, what a great guide to enabling a free software upgrade! I followed your video today and it all worked fine. Pulling out the little yellow wire was quite a bit harder than I was expecting, a pair of really fine nosed pliers would be a help. Pushing the safety pin in didn't seem to make a difference for mine, but my technique may be a bit sus. Anyway, all good and really did only take 15-20 mins.
Lo he hecho igual que en el video pero la iluminacion de la pantalla es muy oscura y no se como iluminarla mas. Agradeceria que me digera como solucionarlo. Gracia
I’ve done this today. 👍. Waiting for the camera to arrive next week. What about all of the other features. Do they all work? Some of the fields are blank. Also do you need a gvif module to allow the camera to work? Does anything need enabling?
Thank you for this post, it looks very interesting, i have a couple of questions. Firstly does the reversing camera initialize when reverse gear is selected? And secondly will my apple phone automatically connect via Bluetooth. I have an LR3 HSE 2007.
Very interesting video just a quick question where are the light bulbs for the display mine hasn’t got the day time light only the night light which is duller as you know thanks in advance 👍
Adding the reverse camera will it switch automatically when you put it in reverse or do you have to power up the camera when the reverse lights come on and the unit switches when it senses a video input?
I no it’s a year old but I’m going to give it a go . Could you help with what lead I would need for tv to work on the screen . Cheers thanks for the video
While to menu system is upgraded, I now have a screen that is too dull to be useful. I tried increasing the brightness in the settings but no change? Do you have any suggestions?
If you search on Disco3 Forum, there is a discussion and photos of a diode you can solder. Also try turning up the brightness for the instrument cluster :) May help a bit
So the IID tool is needed to active the reverse camera? I did everything as described on the video but didn’t get the reserve camera view. So maybe the IID tool would be the answer ?
Thanx a lot GG AVIATION for helpful information, software issue is working properly, I have 2 questions plzzz Can we make audio work with the Bluetooth?? Do I need any adaptor for reverse camera to work on the screen?? Thanx again for your interest and reply... 💖
HI, I have seen youtube videos about connecting to the bluetooth - there is a 4 digit code to put in. The reverse camera or Tv modules run on a cable called FAKRA - but you have to have certain modules in place for the FAKRA in/out to work :)
Did the mod however none of the on road info is displayed? Items like fuel consumption, avg fuel trip etc.... Anyone else experience this? I have an '07 V8 HSE
I am very interested in upgrading my screen mainly for phone function, so for clarification, to get that upgrade all I do is remove and insulate the central yellow wire on the button panel of the screen. As directed in your video. as I do not wish to add camera or video device is this all that needs doing.
Yes I could have, but i have sold my Land Rover now. The camera connected by FAKRA cable to the rear of the Denso Screen, but you need a Gap Tool or similar to enable it :(
Hello friend, I have seen this video and I have done it in my discovery 3. The problem is the brightness of the screen is very dark and when it is illuminated by daylight it looks very dark. Could the brightness of the screen be increased?
Bit late to the party but did you ever plumb in a reverse camera. I'd like to do it on my 2006 L200 RR so the screen switches to the cam when in reverse gear. I figured out how to wire the cam to the lights, but if I connected directly it to the socket behind the screen would it do this? Great video btw.
Worked fine on my 2009 RRS but the setting button takes me to Sat nav and the Sat navbutton takes me to the phone? Anyone have any idea what needs to be done to swap buttons to take me to the right option i select? Regards
I have an odd thing going on with my system on a 2005 LR3 HSE. The screen and the radio were presumed dead when I bought it. However, while on a drive the other day both the info screen and the radio lit up with the info screen just showing LAND ROVER and the radio lighting up but showing no information and no sound...thoughts? I am changing out the entire radio system so no worries there, but the info screen I'm not sure what's going on there...any information or help you could share would be appreciated.
@@daz.j It does go a little darker, but you can still push up the brightness in the on screen settings and the control on the dashboard next to the headlight switch
*_Check out the video to see how you can upgrade from the Basic Screen to the full 4x4 Info & Phone Screen. All for FREE - just 15 minutes of your time. Disclaimer: You do this at your own risk, no liability is accepted at all. Its worked for me :)_*
Hi great video. Did it allow hand free calling when you didn't have it originally?. Thanks
@@simonemmott7060 Try connecting from your phone and enter the code 2121
@@GGAviation did you get the camera to work i tried on the 3 fakra connector but nothing no video on the screen..
this is a hope to get near camera. I get a Land Rover Discovery 3 TDV6 HSE 2006. Did everything as described but couldn’t get the near camera view on the screen. Any suggestions? And after some reading here next I need the scanner IID toll for the system recognize the camera. Problems: That bluetooth scanner cost around U$650 ( US dollars today ) So I need to find some one who can have it here in Brazil. Also after cutting the middle yellow wire screen gets darker so I still need to find what should I be soldering in.
Hi, this is an awesome tip! Is the adaptor spelled “fakra?” Trying to find one to order online. But wasn’t sure of the exact spelling. Thanks!
That's insane! Bought mine with "wrong" navigation, so the whole screen was pretty useless until i tried this. Can't believe how easy this was. 10-15 min max indeed! Thank you good Sir, for sharing this gem with us "low spec" LR3 owners!
Glad I could help!
Wow! Just tried this. It literally took me 15 minutes. I didn’t completely remove my unit, I just pulled it out slightly and removed the wire with the safety pin taped it up. Then refitted everything and it works! Full access to the 4x4 menu and all the other features. Very impressed!
I honestly thought this would be a load of rubbish and couldn’t possibly work, until five minute later I did as shown here and it works like it was always like that from the factory…
Thank GG Aviation you are an absolute legend 🥳
Thank you :)
I Stumbled across this video, I tried it and hooray it worked 😂😂😂😂. I think it all goes down to the simplicity of the presentation by GG Aviation even some of us who are hopeless on mechanics felt it can be done 👏🏽👏🏽👏🏽😂
Glad it helped! What a lovely comment - thank you
Honestly i was sceptical at 1st but let me be the 1st to say I was so wrong to doubt!! 8 screws and a tweezer to pull the wire out and plugged it all back in i now have the upgrade. Cheers pal 👍👍
To cut the wire is a easy task and see the screen showing the new functions.
Hard is to make them work.
I still didn’t give up !
Works great. Thanks. Pulling out the center wire was the difficult part. Had to apply quite a bit of pressure. Great vid
Absolutely in-cre-di-ble!. It works!!. From a simple 2 box old menu to a newly 6 one!.
The physical buttons don't work fine now, but it doesn't matter at all with this magnificent update.
Thank you very very much!
Happy it helps :)
Thanks mate worked a treat! I chose to just pull back the tape and cut wire then put close ends on each wire as I couldn't get the wire out of the connector and I was getting pretty rough with it and it's quite fragile.
Glad it helped
Yeah what a good bit of advise! I didn’t even need to take out the radio just moved the facia forward and got the updated screen! Thanks a lot so much better!
Wow best video! Just out of curiosity done it and it worked!
Brilliant upgrade to screen, Didn't do the camera bit but the extra screen options are a real improvement, thanks very much.
Glad it helped
Thanks GG Aviation, what a great guide to enabling a free software upgrade! I followed your video today and it all worked fine. Pulling out the little yellow wire was quite a bit harder than I was expecting, a pair of really fine nosed pliers would be a help. Pushing the safety pin in didn't seem to make a difference for mine, but my technique may be a bit sus. Anyway, all good and really did only take 15-20 mins.
Thank you for such a great comment - happy it worked for you :)
Lo he hecho igual que en el video pero la iluminacion de la pantalla es muy oscura y no se como iluminarla mas. Agradeceria que me digera como solucionarlo. Gracia
I’ve done this today. 👍. Waiting for the camera to arrive next week. What about all of the other features. Do they all work? Some of the fields are blank. Also do you need a gvif module to allow the camera to work? Does anything need enabling?
Thank you for this post, it looks very interesting, i have a couple of questions. Firstly does the reversing camera initialize when reverse gear is selected? And secondly will my apple phone automatically connect via Bluetooth. I have an LR3 HSE 2007.
I just did this. It works, but now my screen is very dim. I have tried increasing the brightness. Didn't help. Anytime else come across this problem?
Very interesting video just a quick question where are the light bulbs for the display mine hasn’t got the day time light only the night light which is duller as you know thanks in advance 👍
Did the brightness change so it can't be seen very easily during the day ? Mine has had it done before I bought .
Hola! espectacular video! Tengo RRS del 2007 sin camara de marcha atras. Funcionará esta modificación en mi vehiculo? Gracias
You need a FAKRA cable to connect the camera :)
Adding the reverse camera will it switch automatically when you put it in reverse or do you have to power up the camera when the reverse lights come on and the unit switches when it senses a video input?
I no it’s a year old but I’m going to give it a go . Could you help with what lead I would need for tv to work on the screen . Cheers thanks for the video
The lead is a FAKRA connector, but you need the TV modules installed also :)
This worked just did it in my d3 I almost paid someone to program them in quick question got the reverse cam how can I see the TV option please
While to menu system is upgraded, I now have a screen that is too dull to be useful. I tried increasing the brightness in the settings but no change? Do you have any suggestions?
Same problem. Solution ? Thanks (LR3 2005 2,7 litres diesel)
Search panoramix brightness
@@AndyK.1 Thanks about answer but i did...and it’s not enough
If you search on Disco3 Forum, there is a discussion and photos of a diode you can solder.
Also try turning up the brightness for the instrument cluster :) May help a bit
I've added the camera and disconnected the wire and cut the wires for reverse lines and image. But image in still flipped. Any ideas?
Just did this and for some weird reason, the radio volume didn't work either with the knob or steering wheel buttons. I had to revert back...
Could you use the other fakra connectors to add additional cameras, like a front camera? Has anyone used the IID tool to active the reverse camera?
How long was the Fakra Cable?
There are 3 fakra connectors on the rear of the Denso screen
Fakra cables are typically 6 inch long, but have an AV type connector on the end, so really easy to extend
So the IID tool is needed to active the reverse camera? I did everything as described on the video but didn’t get the reserve camera view. So maybe the IID tool would be the answer ?
@@besttourinrio9 Yes. In Ccf set rear cam to fitted
Thanx a lot GG AVIATION for helpful information, software issue is working properly,
I have 2 questions plzzz
Can we make audio work with the Bluetooth??
Do I need any adaptor for reverse camera to work on the screen??
Thanx again for your interest and reply... 💖
HI, I have seen youtube videos about connecting to the bluetooth - there is a 4 digit code to put in. The reverse camera or Tv modules run on a cable called FAKRA - but you have to have certain modules in place for the FAKRA in/out to work :)
i didnt get it... what do i have to do to change to this screen?
Did the mod however none of the on road info is displayed? Items like fuel consumption, avg fuel trip etc.... Anyone else experience this? I have an '07 V8 HSE
Some people put a switch on the removeable cable, so they can flip between screens
Thanks for these information.. after following thes instructions the 4×4 info it will work fine or gast freezing info and photo ??????
Yes it will work fine - all the 4x4 info, including where the wheels point - which helps when off-road
И что это даёт? Новое меню головного устройства? Или появится ТВ и aux?
I am very interested in upgrading my screen mainly for phone function, so for clarification, to get that upgrade all I do is remove and insulate the central yellow wire on the button panel of the screen. As directed in your video. as I do not wish to add camera or video device is this all that needs doing.
also try a youtube search on the code needed to allow bluetooth connection :)
Does anyone know if this screen can be fitted to D3 that did not have it, and I have an after market audio head unit
Great Info, great footage,keep rocking 💐💐
Thank you so much 👍
Hi there, cable 4 goes into hole 5?
Just Don it this morning fantastic thank you very much for your video
You are very welcome
Anybody know how to get the day time back lights to work?
I didn’t get how you changed from Land Rover to Range Rover mode?
Yes, i think they call it RR Mode
@@GGAviation But how did you do it, was it something you had to connect?
Do you just disconnect the forth wire on the back and it becomes the Range Rover screen?
Does this work on the RRS aswell as only have settings 4x4 and nav and would love the phone function or is it just on a disco thanks
I think this works for the DENSO screen only, so if your RRS is 05-09 then I guess you have the denso screen?
RRS is the same. However for phone functions to work you need the phone module installed and therefore it would already be on your screen menu.
Nice video, can you do one installing the camera
Yes I could have, but i have sold my Land Rover now. The camera connected by FAKRA cable to the rear of the Denso Screen, but you need a Gap Tool or similar to enable it :(
Hello friend, I have seen this video and I have done it in my discovery 3. The problem is the brightness of the screen is very dark and when it is illuminated by daylight it looks very dark. Could the brightness of the screen be increased?
I’d like to know this as well…plus non of the “extra” menus don’t calculate…
Hi I would.lijw to know is the TV setting will be available in the new menu after I follow your process
yes it will, but you need the tv module hardware installed also, second hand on ebay they are quite cheap now
Thank you GG Aviation, great video. All worked fine accept when I tapped on the phone, it said phone not fitted
Not sure,but you may need the bluetooth module. Have you tried a youtube search on the Phone Code to enter to accept bluetooth? Worth a try :)
Seems like the road info is not available 😞 once activated
I think some people put a switch into the cable, so they can flip between 4x4 info and the original screen
Bit late to the party but did you ever plumb in a reverse camera. I'd like to do it on my 2006 L200 RR so the screen switches to the cam when in reverse gear. I figured out how to wire the cam to the lights, but if I connected directly it to the socket behind the screen would it do this? Great video btw.
No. You need to edit the Ccf with a £500 tool to say a camera is fitted.
@@AndyK.1 What is ccf? You mean an OBD scanner coding process is needed?
@@eugeneyoung2803 Yes. Car Configuration File. But not many OBD tools can do it. Only ones around £500
I can’t believe it’s worked out
2005 discover
Worked fine on my 2009 RRS but the setting button takes me to Sat nav and the Sat navbutton takes me to the phone? Anyone have any idea what needs to be done to swap buttons to take me to the right option i select?
Regards
Hi, did you resolve this issue? Having similar issue.
I have an odd thing going on with my system on a 2005 LR3 HSE. The screen and the radio were presumed dead when I bought it. However, while on a drive the other day both the info screen and the radio lit up with the info screen just showing LAND ROVER and the radio lighting up but showing no information and no sound...thoughts? I am changing out the entire radio system so no worries there, but the info screen I'm not sure what's going on there...any information or help you could share would be appreciated.
Most system fiber optic loop , you can buy it on eBay or Amazon for about 6💲, I bet that will fix your radio
I’ve heard replacing the old amp will fix that.
Can’t you add the 4x4i screen with the gap iid tool ?
Oui, tu peux activer l'écran info 4x4 avec IIDTOOL.
Yes you can, you can upload the ccf file - but the tool is £450 ?? So this is an easy way to get around paying lots for the 4x4 info screen
Only problem I have is no control over sound
Someone said this can be done with the IID tool. Does anyone know where in the CCF files?
Try the Landrover Forums on google, they have some superb info and step by step guides :)
Does anyone have any idea how I can do this on Discovery 4? Tnx 🙏
try www.disco3.co.uk/forum/ see if there is any info there. Its a great source
Dose it recognize the camera or dose something need to be programmed
I had a reverse camera running on it - but there is a 4 digit code to enter first. Search for the hidden menu code for Discovery 3 :)
Do you still have secret menu's list?
Yes still do
Great piece of information! How can I change the language of the screen? I need to change it from German into English. Tks!
I do not know, sorry for the late reply :)
awesome video, thanks a lot!
hi worked fine on my rr sport 2010!! thx
Glad it helped
thanks man ! works perfect 👍🏻 best spend 15 min this week 😁
No problem 👍
Thanks thanks thanks 👍👍👍👍👍👍👍👍👍👍👍👍👍👍 its working
Welcome 👍
Awesome!
Thanks works great.
Works 100%
It works ! THX :)
Excellent :)
guess what im doing tomorrow lol
Its worth doing :)
@@GGAviation how much darker is it when done?
@@daz.j It does go a little darker, but you can still push up the brightness in the on screen settings and the control on the dashboard next to the headlight switch