Two suggestions; first, is use a different type of "wick" material for the "match head", there are plenty around that will hold the fluid without burning out the wick when used. Some examples of this are sold through ecigarette ans eliquid stores online, there are also "fire wicks" you can get that are made out of kevlar and the like. Second; affix a piece of an old needle file to the side of your reservoir and when striking, hold the "match" firmly against the rough surface and strike in one single action rather than loads of little strikes. It should work first time and won't wear out like your abbrasive paper did. Other than that; fantastic job!
Maybe a copper tube cut in half and soldered to the side, could have the sandpaper fixed to the inner side. This way you have a channel to rub the matchhead without having to make a precise motion, and also prevent the sandpaper to rub against other objects in your pocket
It's a cool concept, if inferior to a lighter by a good bit. One thing you might want to do is put something on the grip so the metal won't heat up and burn you with extended use.
Brodi me encantan tus videos. Pero tenes que mejorar la iluminación. Te recomiendo que uses 2 softbox. Son muy faciles de hacer y muy económicas si te das maña. Si le metes pila a eso te vas a la Luna. Exitos!
Two suggestions; first, is use a different type of "wick" material for the "match head", there are plenty around that will hold the fluid without burning out the wick when used. Some examples of this are sold through ecigarette ans eliquid stores online, there are also "fire wicks" you can get that are made out of kevlar and the like.
Second; affix a piece of an old needle file to the side of your reservoir and when striking, hold the "match" firmly against the rough surface and strike in one single action rather than loads of little strikes. It should work first time and won't wear out like your abbrasive paper did.
Other than that; fantastic job!
Pretty good proof-of-concept, would love to see a second version!
Maybe a copper tube cut in half and soldered to the side, could have the sandpaper fixed to the inner side. This way you have a channel to rub the matchhead without having to make a precise motion, and also prevent the sandpaper to rub against other objects in your pocket
You should check out the Ronsons touch tip lighter from the early twentieth century. I think you’ll get a kick out of it.
Bro that is so fucking cool, thanks for sharing
Old is gold beta
Wow.. Special and unique. Waiting for your next project 👍🍻🤩
It's a cool concept, if inferior to a lighter by a good bit. One thing you might want to do is put something on the grip so the metal won't heat up and burn you with extended use.
Brodi me encantan tus videos. Pero tenes que mejorar la iluminación. Te recomiendo que uses 2 softbox. Son muy faciles de hacer y muy económicas si te das maña.
Si le metes pila a eso te vas a la Luna. Exitos!
man you are genius!!!
nope! the flintstone might explode if it gets too hot, so it is not permanent
Cool concept.
Witch oil putting in litlghter how to buy us. Plz answer me
Alcohol (turn on captions)
Very intriguing until it was time to light it up
Not sure why the song "Burning Down the House" came to mind while watching this? 😳👍🏻
I like it
There are way better ways to do this but it is still neat.
He did said it is a prototype.
Increible
Merece aplausos
³w³😊
Worths every mb
Cual fue el líquido qué tenía la jeringa?
Alcohol jsjs
Show, farei um , abraços .
well, you are a collective farm genius, make an antediluvian lighter from a factory lighter, ...
Muito massa!
you strike it like that? ok 😶🙄
Ok, insfiratif
💖👏👏👏
saludos 🔥
🤙🤙🤙🤙🤙🤙🤙🤙🤙
Muito ruim seu isqueiro!!!!!
Muito bom
احلى لايك موفقين ان شاء الله
Fazool and bakwass just time wst
Estragar um isqueiro para fazer essa porcaria...
o esqueiro ta vazio cara
Faz melhor e posta aí!