This is my homemade valve compressor tool that took ten minutes to make using an old pry bar grinder and a file.... that's it... Contact: maldo72motorsports@yahoo.com
Seems like itll marr up aluminum heads doing it that way or cause you to damage the threads by pulling the bolts at that angle.. that lever action actually compounds the forces exerted on that fulcrum point., just like it compounds on the springs.. moreso on the bolt.. id end up having to get a nut to get the bolts on with the head off and that just worries me more about marring up the head..
hi and thank you for watching .. note I used the old studs ... i made this video for people who are in a pinch and need to make a tool to get the job done...
Hmm I have done this before on inboard big block chevy boat engines with triple valve springs .. for me used what we had laying around the shop... ( flat metal stock we heated and bent for clreance around the intake etc the advantage for us we were able to do it in the boat and Provided great Leverage for the triple valve Springs... making the job super easy
Great idea, I'm going to purchase one now, they are only 4.99!
this works great for single springs super cheap to make
I found a pry bar that I already had, it worked great!
Yes cool I have done this before works great ...
Super Simple!
thank you for watching
Seems like itll marr up aluminum heads doing it that way or cause you to damage the threads by pulling the bolts at that angle.. that lever action actually compounds the forces exerted on that fulcrum point., just like it compounds on the springs.. moreso on the bolt.. id end up having to get a nut to get the bolts on with the head off and that just worries me more about marring up the head..
hi and thank you for watching .. note I used the old studs ... i made this video for people who are in a pinch and need to make a tool to get the job done...
I see that 4th gen at the end
thx for watching and supporting the channel
Or for 25.00 I can buy one.... This wont work for heads on the car. Not sure about the frugality of this one. Interesting idea though.
I will have another video of this in action... it works fine and was easy to use .. note you can use the other side where its bent 90 degrees also..
Hmm I have done this before on inboard big block chevy boat engines with triple valve springs .. for me used what we had laying around the shop... ( flat metal stock we heated and bent for clreance around the intake etc the advantage for us we were able to do it in the boat and Provided great Leverage for the triple valve Springs... making the job super easy