Water Hash Hacks - Advanced Techniques How To
Вставка
- Опубліковано 11 гру 2024
- These hacks include: How to protect your bags, how to remove water faster and easier and how to clean debris out of your water hash.
A few notes about the hacks: About the shield, after you put in the shield the screen pulls tight. With a light push the screen should not touch the bottom of your bucket.
About mixing runs, if too many runs are mixed the largest micron bag used will catch most of the hash, this happens because the screen does not have enough surface area to drain properly. (makes good dahbus though)
About rinsing, refill hashwater in the 32 gallon bucket and siphon it again to give the hash one big rinse.
Music by www.bensound.com/
I would suggest an end result when doing these videos, we like to see what the product looks like when it's finished and hopefully you can test it and let us know how it fairs in that arena as well.
Why not wash with a drill and plaster mixing head in a separate bucket? Then pour through the bubble bags?
Any friction is wear & tear on that fine mesh. I don't even allow ice cubes into my bags?
If you use quality bags and methods then what’s left in the water should only be contaminants.
I do not need a filterbag or ice for making good water hash. Change my mind....
@@saschapurner9579 You are correct. You do not need a filter bag or ice for making good water hash.
You'll be a laughing stock if you don't though.
An intelligent person does NOT MIX IN THE PAIL WITH YOUR BAGS.
That technique was introduced by bag manufacturers so you would rip your bag.
yup. no point. I'm using a cement mixer. Dump into a 30 gallon trash can with 5 gallon size hardware cloth trash catcher. rinse and repeat. when I've got five or 6 gallons I dump through my three bags. That 5 gallon hardware cloth catch pan has been rinsed and now lined with a 5 gall 220 work bag. I'll dump about 3 batchs through then drain and screen. I've got a pulley rigged over the table to hold the bags to drain. Meanwhile the mixer is tumbling another batch. I'm outdoors. About 35 degrees and my fifty foot hose is laying in the snow.
Might try to make a guard bucket at some point. Thanks for the tips!
im trying the rising part of the water and settling after, after my first pour into another bucket i could see the white trich at the bottom, i rinsed it once more , now waiting to settle, havent use the drain methode , just a slow pour. tks for the tips man. I should probably buy bigger bags too, 75g of good trim and it was all jammed up the first time.
I use a piece of tubing to siphon it off the top all the way down
toil and trouble.
good vid, thanks for avoiding the various dabber extract tropes and lingo. just a normal guy making his hash.
not at all
This is such a great video! Wtf is everyone talking about inn the comment section?? Sounds like a bunch of kids who have never made hash in their lives and only wanna see the final product. Great job man, hope you see this.
Thanks man
Ooh shit you act like a real man Who makes hasch home every fucking day since you was born. Great job u alpha man. You are the coolest
@@louiselagerfeldt9076 they are both medicine you fucking imbecile.
@@louiselagerfeldt9076 i bet u are very fun at parties huh
EVER THOUGHT ABOUT SETTING THOSE BUCKETS THAT YOUR WASHING THE HASH IN ON A SUB WOOFER SPEAKER AND TURNING UP THE PHIL COLLINS????SOMEONE USED THE TERM IN THE COMMENTS"SEPERATE BY DENSITY"BUT IF I HAD IT MY WAY I LIKE THE WATER TRUCK FILLED WITH ICE WATER AND TRIM AND A LONG BUMPY ROAD, GOT ALOT OF THEM UP IN MENDO!
IV been making hash for 15 years and ditched the sleeve bucket long ago, but literally every other tip is fucking gold,
My only addition is to keep some of your waste water to rinse bags and buckets instead of fresh (new) potentially not as cold of water
Thanks for the tips
I was wondering why you decided to ditch the sleeve?
@@JustWengie extra peices, cause more trouble than good also my first agitation is done in a bucket without any bags, then once agitated for a while I pour into a work bag bucket
@@nickkk420 so you pour your agitated material into a work bag and let it settle, right? Do you agitate it at all after it is poured into your work bag? Have you tested yield results at all compared to agitating in the work bag?
I do a small agitation after but just to knock what's already been removed back to the bottom,
Haven't tested side by side, but my experience says this is the way,
nick longstaffe - thank you dude and I salute you’re smarts, I thought I was the only one watching/commenting this with a head on my shoulders! lol This is very in the box thinking am I wrong? Nothing needs to be settled with the right system and setup of bags/screens, right? If I am wrong, please help. 🙏🏻 thanks my friend
draining ur 25 mic bag drill holes in drain bucket place all ur payload bags inside 1 another if u have more than 1 lol ive got 9 bags so u can grade ur hash ANYBODY NEEDS HELP LET ME NO HAPPY TO HELP
effoffu hey what else???
what else u want m8
Hey been can you source bags ??
@@villodevillain1328 aqua labs payload bags
effoffu how do you dry your hash?
What size micron bag are you using to push it into the water??? 25micron?
Yes we do use suits and masks, but we’re making a high quality products. Not Bath Tub Gin.
Annnnd.....what??
I got absolutely nothing from this video whatsoever.
Bruh am I the only one who laughed at the begging when he said that😂😂😂
Somebody was beqqinq? I think yes.. the only one
Nah i laughed 😂😂
do i need to cure if im just gonna make bubble (ice water) hash? should I cure before? thanks
Short answer is no. But if your hash is green you will want to cure the hash the same way. Otherwise I like to cure the bubble hash in a similar fashion but for different reasons. I put it in a jar before it's totally dry, it should rehydrate in the jar. The first time you do this only leave it in the jar about 4-6 hours, then put it back out to dry for 24 hours. Then back in the jar and repeat. Each time you do this it will take longer to rehydrate and you can leave it in the jar longer and longer and start to just burp it once and awhile. About six months and then you should make sure to dry it 💯 and put some silica packs in there for long term storage. Disclaimer, be really careful to much heat or time in the jar can lead to mold, error on the side drying it out again to early then leaving it wet in the jar too long.
Where's your ice? You must use ice cold water in all these steps. For better tasting hash, use bottled water, not a hose. Although I do agree with your reducing method as I do this myself....but always with ice cold water.
Gotta have ice. I'm doing mine outdoors 35 degrees. I started my last batch with icecicles and a barrel of ice water. Another bag of ice into each batch. So cold it started foaming immediately. Did I mention I'm using a cement mixer? I have well water also.
Hey where did you get the bags please they look great. Thanks for vid
My 220 "work" bags are Boldtbags and I'm using 90, 70, and 25 Payload bags for sieving. I like the Payload bags for sieving since they are inexpensive and lightweight. Payload bags will last a long time using this hack. I like the Boldtbags because they are heavy duty and I prefer a heavy duty "work" bag. HocG can order bags for you or if you have any questions about bags please feel free to contact us at Helpourcirclegrow.com
@@hocghelpourcirclegrow7693 ive seen theses bags for 5 gallon buckets i bought the ones you have wich are bigger whats the size of them or what gallon trash can can i buy or any info would be great thanks
@@biancagarcia4006 The bags I am using in the video are the 32 gallon size. Boldtbags are reasonably priced for a great high quality bag and Payload bags are good quality inexpensive bags. I have drifted more twords the Payload bags because of the extra recessed screen they have, the flexibility of the material, and they are slightly bigger around. I recommend a 17 gallon muck tub, you will need to cut the handles off and use payload bags for muck tubs because they are a little bigger around and Boldtbags will not fit the muck tub even with the handles cut off. I like the muck tubs because you can get away with using half as much water and process a little more material each run. Otherwise any nice 32 gallon garbage can will work fine with either companies bags. They also make a 20 gallon garbage can which is quite nice and will fit any 32 gallon bag.
Do not mix them keep you good stuff away from your bad stuff
With this method you mix the first runs together only, agreed never mix the bad stuff with the good stuff
Would anyone feed there plants with the used water ….
I’m trying it
Can’t be anything bad in it just turpentines I hope 🤞
you mean terpenes, right? I've heard it is great for plants.
Creating buckets like I discussed at the end of the video (with a hole in the bottom) makes it a lot easier. I am hoping to make a new video this fall showing my new system.
HocG Help our circle Grow ...can you drink the water?
dont do that!
You can most definitely drink the water and it is delicious. It barely contains any thc because thc is not water soluble. It will give you a hell of a buzz though and I think it is all the water soluble stuff in cannabis that gives you the effects. Different strains taste better or worse, I recommend adding half fresh water and half hash water to lighten up the tea. It is strong straight out of the bucket. My favorite ways to drink it are hot, or on ice with a little sugar and cream.
DO NOT DO THAT, the chlorophyll extracted will be SERIOUSLY BAD FOR YOUR STOMACH
DONT BE A FUCKING DUMBASS
A guy with dreads wearing crocs is bound to know about hash
Man I love good bubble hash!!👍✌🖖great video man!
Why need a shield? Why mix in your bag just mix in an other bucket but I like the trick with the 20 micron
Thought was a make your own coffee video.
The colder you keep the water the quicker that settlement will happen
The results must of been bad enough not to be featured in the video.
I will say thank you for the first tip, the bucket in the work bag will be useful during the 3-4 runs.
No the results were great, I just worked into the night and pulled my hash late. I didn't know everyone would be so upset not seeing results and the purpose of the video was to show some tricks to make your hash making a little easier, not to show off my final products.
Bud dah I see, well you certainly accomplished showing us how to make it easier if you’re a 20 gal bag runner. Thank you for that! I guess it’s just Normal in most videos to see the end result of your hash when showing your techniques. I know this is most likely low quality trim or larf so I can understand if it wasn’t in the end video anyway. Though I know you stated, that’s not the case. Thank you for the video 🤘🏻
This week I will be filming my full setup and will make sure to include results, true that this video was made with larf and the results I'm sure weren't stunning in quality, probably 40 -50% thc. Especially when working with low quality trim or larf that rinsing process is super important for improving quality. Rinse until the water is clear and you will be surprised how much better your trim runs will come out.
first hack no good bucket rubbs the inside of bag and ur water prooof coating from inside bag gets added to hash
I want to swim in that brown water and bathe in it and brush my teeth with it and use it as a deodorant and to wash my clothes in
I want to make brownies and bread and muffins with that water.
smells like bong water.
awesome video man
keep the first wash separate from ur other washes and get cold room pls
You might make someone think you have done that a time or two great info thanks
How can water do the trick
And Some are using chemical🤷♂️
Emil Jørgensen water is a chemical
dude this shit needs to stay cold so it doesnt become a sticky mess
Problem with this method is your letting water run away with a percentage of your hash strength, better to dry sift or even use everclear and dissolve the everclear so your left with the percentage that would've flushed away with the water.
Then make THC Jello shots 🤟
Surprisingly I have never turned the water into jello shots 🤯🥳 But if you mix cream and sugar in with the water it makes a great Thai iced tea.
@@JustWengie damn sounds good
Yeah that won't work bubble hash is THCA that doesn't get you high it's the act of heating it when smoking it that decarboxylates the THCA into THC by breaking of the Acidic part of the chain. You could eat a pound of weed and be fine if it's not decarbed. That water is full of everything you don't want in you final product that's why it's used to remove the garbage and dust and plant matter
so its all 25ug? i think the 73ug is the best
No, I filtered what was at the bottom of the bucket through 90, 70, 25. I will also filter it through a 120 before it goes into the collection bucket.
73 is the best. You'll find all the hair in the 25. I don't care if you where a hair net and no pets. There will be hair and or fibers in that last bag. Pressing 75 or 25 will yield about the same percentages. 40-50 % in my experiance. 75 will have less "foreign" material.
you should never let your hash sit in water and just chill while you do another run or multiple runs.....crazy! get your hash from that water as quickly as possible an then continue on ...
Why?
Bud dah the hash degrades very quickly in water ...quality goes down substantially if left in water for prolonged period. ..
your kidding advanced its like comparing a shovel to a backhoe tractor, lmfao, should keep you busy till your next great advancement..happy blazen boys
Admittedly these are advanced techniques and tips for first time water hash extractors. What is your preferred method for making hash?
you need a tied system of silk screens (micron 120 down to 50) a gravity feed eg; 60ltr plastic barrel (for water and crud, in line barrel with capture net with release spout at bottom sitting above tied screens,the screens can be made from fly screen framing and the screens can be fitted the same as you would do with normal fly screen and the frames can be made to fit your tied stand that will seat each screen(my screens are 30cm by 30cm square ,with the filters from 120 first screen then 100 to 80 then the 50 sit at the bottom drain tub below the tied system,i use 100ltr for the bottom tub and pump the water back up to the barrel as it is then a continuous cycle maxing the yield nothing is lost.i run 4 oz per run for 4 to 6 hrs more if it is still producing, collecting yield off the screens as you go(a small window cleaner is good for collecting running over screen), and then drain the barrel and let water sit over night in tub to settle,and yeah i have tap at the bottom of the tub below the 50mc screens ,to drain out tub(do it slow) the 50,s are super fine and collect incredible amounts of fine yield,when dried all the yields from the diffferent screens can be blended (coffee grinder)then heated and compressed, if ya got and washing machine ya can swap that for the barrel ,if i use the barrel i stir the crud with drill and a paint mixer for best results and keep ya water cold as, i freeze buckets of water an add to tub 2 to 8c best temp good luck Bud, i am sure even this system can be advanced:)
@@stillwandering5933 its nice setup, im sure he would like your technique, its just a word things you know, advanced for somoene might not be advanced for somoene else. Can we see your work somewhere? tks
@@stillwandering5933 is the screening part open? or is it enclosed in a big tube by example?
@@maxtheyouth they are all open(imagine small framed fly screens) horizontal in a stand converted from metal paper tray stacks. the barrel with the spout sits above the screens,make slides for the screens from small plastic angles rivet them inside the frame so the screens are about 40cm apart,you make the screens to the inside of the stacker (you can slide the screens to collect some screens will collect faster than others),and the stacker sits above/over the tub as the water runs thru into the tub and then it is pumped back up to the barrel, i use timber planks across the tub to support the screen stacker,would be some time before i set it up again i am good for few months yet,hope you sort of get the idea good luck bro
That tunes Hella catchy lol
Look how green it is because its too warm of environment u need to do this in cold temps and use ice .this is not the way
I’d love to be a fly and land in it and drown slowly
You'd literally be just drowning, not high at all.
@@marklfc9422 👍hahah
I wanted to see the Finish hash
Great video ✌️
and the result????
Is that you are able to pull 1.5 lb chunks of hash easily. Combining your runs all day and getting rid of 90% of the water before you try sieving makes your life easier when dealing with large amounts of material.
City water for this method is bad.
Use water filter every time know matter what what.
Not a huge deal unless ur in flint Michigan or anything, maybe I just take shit forgranted living in canada
@@nickkk420 or anywhere in California...many municipalities in California add chlorine or chloramines to the water during treatment which isn't recommended in growing effectively. Same for Canada. It'll work, but it won't be ideal. RO systems will get most heavy metals and chlorines out but they wont get the chloramines out. One either needs to let them evap over a period of time or find alternative water sources.
@@zachthompson5335 I find that more. Of an issue with growing plants, never noticed chlorine or. Chloramines in my final product, this may be a byproduct of the curing process I take
nick longstaffe chloramines are added to water by municipalities in their water treatment plants. I cannot speak on Canada however in the states it’s really common. As well as heavy metals and calcium. Using tap water will work if you know what your doing with your soil otherwise I’d highly recommend an in-line filter of some sort.
No idea what this video is about
haha
Even his Hair looks like weed 😁
This should be titled bubble hash for beginners, full melt is what you want
I promise you this method makes full melt, rinsing the hash improves quality. I have test results for hash I have made this way, you can see them here helpourcirclegrow.com/store/index.php?route=product/category&path=80_102
Yield percent?
I'm sorry I don't have any yield percentage numbers. The tricks in this video will not effect your yield percentage in any way though. In my opinion the mixing process is what impacts yield percentage the most.
Nothing rinses clean in water with flourine.
sweet video
Bill Vapeurs I
.
Your better off putting the different bag's inside each other and lifting one bag at a time to get the different quality hash.
peteon4 wheels with large amounts?
And ????
What ??
Stop smoking boy
Your mind is on the ground
You walk on it
Stick mixing it
I like to color it or rock it
No result pfffff
I do have test results here: helpourcirclegrow.com/store/index.php?route=product/category&path=80_102 and I was finally able to get some numbers after working for a company in Portland. I processed 100 lbs of Gorilla Glue per day with just over a 10% yield, and the resulting hash tested out at 73% THC
Is this water thing even comparable to RSO..... I'm a medical user..
I can not say for sure the differences between the two when it comes to cannabinoid profiles, but my opinion is, if you are eating it I would stick to RSO. If you are smoking then I would go for the water hash. Water hash is a solvent free extraction process that leaves your trichomes intact, so it will have a longer shelf life than RSO.
Is that it ?? Over a hundred thousand views !!!! Wtf !!!!
haha 373,000 now.. hey a great title is all you need. but I enjoyed the video.
how to waste your weed
How to turn your trash into cash.
hahaha the intro
😊👍
Vubec nechapu co to felate.
i see no hash.
Sorry I didn't show the final result of the hash. You can see a pile of hash at 4:10 before all the water was removed. My next video I will be sure to include my finale product.
I think what I see is stuff that can be cooked into hash. hash is a nice brick. cooked and pressed.
the cloudyness of the water is the hash. maybe for somebody who has only ever observed the final product you see no hash, this video should change your perspective.
@@jerrybear3081 shhhh. im 50 been growin since I was 8 in 1977. don't need you tellin me nothin. "only ever observed..." arrogant fuck. shut your hole.
@@devilbunny2000 jeezis dude. ever heard of weed? calm down
Can you send me some plzzzz.
When I get back to Oregon I would gladly give you some, and blaze a couple dahbuses
super sweet
Thats a bad vid oh lord only frenchy canoli tech works perfekt u waste so much resin oh lord
Frenchy's system is great. but not Ideal for processing large amounts of material
Long process
It is, I have been refining my process for about 10 years, and I can now process 100lbs a day with one worker
microbial soup!!
Waste of my time
sorry but this videois no help when youve never done this before and im a connisure
Why you sounding like a Muppet?
ترجمه يا عالم
ترجمه
Hey bro, here international people, so try stay cool and write down in English.
DISAPPOINTING!
Poooooop soup
Fakk
Reported easily
Is this a comedy ?
Lame
Low quality trim and very unsanitary methods! No gloves or hairnets let alone out in the open air. People care about what goes in your body, these methods we used in the late 90s, very backwards totally contaminated. No thanks.
No gloves or hairnets? I thought you were making a joke. Do you use tweezers and gloves every time you pack up a bowl? Oh, you forgot to mention a gas mask and hazmat suit. Wouldn't want some terribly contaminated hash!!!
People smoked Mexican dirt weed for 100 years with god knows what on it.
i will only get hash from guys who wear beard nets and straight beaked caps.