Hello having issue with lal2.25-110v controller is turning working fine but once actuator opens it trips and light turns on inside controller and my control panel shows a flow fault issue any idea what the problem could be
Hello My friend my controller sequence is working good but if i darkened the flame detector noting happened and the burner still working what is the reason
Hello my friend. First of all, try to check wiring and connections inside of the boiler's panel. They must be well tightened. After, try to change the flame detector. If you don't have a new one, borrow it from a neighbor boiler. Also, try to change the LAL controller itself.
1:50 : I have a problem at this point but i dont know what it is. If I reset it, the burner works for two days and go to the same fault like showing at this time fram from the video 1:50. This process is now for two Months do you know what is the problem is ?
90% of the time, you have a problem with some element of the boiler system. The controller is okay. What type of maintenance did you do the last time? I need more information about your boiler. If you can, make a picture of the burner and send it to my email: gishtage@gmail.com
First servo open fully second close to the setpoint??
Hello having issue with lal2.25-110v controller is turning working fine but once actuator opens it trips and light turns on inside controller and my control panel shows a flow fault issue any idea what the problem could be
Hi. You mean a "flow fault issue" on the boiler panel? Do you have a thermal oil boiler?
@@iworkalone6140 yes it was a flow fault issue and it is a thermal oil boiler It would light but would not stay on
Write your email.
Hello My friend my controller sequence is working good but if i darkened the flame detector noting happened and the burner still working what is the reason
Hello my friend. First of all, try to check wiring and connections inside of the boiler's panel. They must be well tightened. After, try to change the flame detector. If you don't have a new one, borrow it from a neighbor boiler. Also, try to change the LAL controller itself.
sir . i need to know about LFL 635 , do you any video about it ?
Hi my friend. Sorry, but I don't have any materials about LFL 635.
Sir i have a problem
Lal2.25 is lockout position how to remove
Its not rotating from starting position
Hi. What kind of maintenance did you do the last?
1:50 : I have a problem at this point but i dont know what it is. If I reset it, the burner works for two days and go to the same fault like showing at this time fram from the video 1:50. This process is now for two Months do you know what is the problem is ?
Hello my friend!What type, model of boiler do you have on board?What type of fuel do you use?
I use the Siemens LAL 1.25 and i use this for oil burner for heating. The burner is from the brand Elco Type is EK 04.48 L-Z. Its a heavy oil burner
Btw thanks for the fast reply👌
90% of the time, you have a problem with some element of the boiler system. The controller is okay. What type of maintenance did you do the last time? I need more information about your boiler. If you can, make a picture of the burner and send it to my email: gishtage@gmail.com
@@iworkalone6140 I send you pictures. Thank you buddy!