I have been watching you tube for a year learning how to soft wash this was the first time I heard how to measure concentration of SH ie by know what 2.1 or 1.8 means on the down stream governor. Thank you so much for sharing.
How's the gun on your hand and wrist? Does it require a strong squeeze? Looking at this one but don't want something that burns out the forearm after a job. Thanks!
Great Frickn video Brotha! So simply and concise. As appreciative as I am for all the other content out there, some videos have a lot of unexplainable babble, which leaves more questions than answers.
Is this a good set up for a homeowner for cleaning windows and periodic house washing?. I was thinking about the xjetm5 to add some soap to the application
For a homeowner, the X-jet may not be a bad choice. I have not used the X-jet, but heard it works pretty good. You can also use it with a homeowner pressure washer. Hope this helos. Thanks
Why did you put galvanized steel component in that setup? Knowing that it is highly susceptible to rusting? Wouldn’t aluminum or stainless have been a better choice?
Stainless or aluminum would have been a better choice, but the galvanized nipple has not rusted at all and I was able to get it locally on the quick. Thanks
The M5 twist do have over spray. But it was not too bad. I have been using my AR45 gas roof pump with the red gun & it has been working a little better. Thanks
@@allproexteriorservicesllc5338 thanks I actually saw you using one in the pervious video. I immediately ordered the parts on your list to build my own. Thanks for your awesome content! 👍
Hello... question here, that Kyle davis shooter tip is for shooting soap or high rinse...??? I have northen tool 5.5 to 6 Gpm, what would you recommend...??? I have Jrod (no assasin tip) witch have served me well but some times I'm falling short to reach house peaks with soap and rinse. Thanks.
I’ve been using a cheap Suttner ST-1100 for around 8 months now downstreaming 12.5 and have had no problems until a week ago. Internal started leaking. So purchased and 2315 as it has the stainless housing and ceramic ball. Wish they made them in safely orange because I almost bought the 2305 just for that. But I want to know where you got your shirts.
Awesome!! I am loving the new gun. I had my guy who is in the shirt business get them made from a jersey company. I am trying to get him to put something together, but he has been slammed. I will work on something. Thanks
How can I connect the gun to my chemical hose with a standard 3/4 fitting? Any type of reducers or adapters to be able to convert to a 3/8 quick connect?
@@allproexteriorservicesllc5338 do you use it for soft washing though, and if so, do you personally use the 3/8 hose to soft wash ? Appreciate the feedback
@@anthonyllanos4768 Most consider the M5Twist a soft wash set up. I am only putting out maybe 500 PSI. I use this set up with my pressure washer and 3/8” hose. Thanks
I've never seen this before! Amazing, lol. I'm hoping this will work for my 4gpm with the correct tips of course... By the way are you still selling your remote downstream boxes??
@@allproexteriorservicesllc5338 would you consider making one for more than what you usually charge? Hahaha. I can't seem to find a preassembled box anywhere online.
Saw my neighbor with services company doing her house and saw this bad boy. Had to asked and finally found it. Thank you brother ! God bless
same setup on my 4gpm and will continue using it when i upgrade to more gpm
I have the same set up for my 4 GPM as well. It works well!! Thanks
🌴 that's definitely the best setup there is in the game
Agreed!!! Thanks
Thank You very much Sir ! Im just trying to get everything together now, and this was Great 👍.
Just set mine up the same way earlier this week
I ordered alot of stuff from thanks for the info I'm in bham Alabama and they do sell 4 gal per min shooter tips...
Awesome! I have friends in Bham. Thansk
Really helpful stuff, thanks!
I have been watching you tube for a year learning how to soft wash this was the first time I heard how to measure concentration of SH ie by know what 2.1 or 1.8 means on the down stream governor. Thank you so much for sharing.
Awesome & thanks for watching. I try to focus on the explaining the details.
Hello, do you have a video of how you did the Cupler to the ball valve? Thanks.
I don't but I connect my ball valve straight to the hose. Thanks
I run that same setup and Orange gun on my 6.5 GPM.
Could I use the same gun for my 4gpm??
@@yambe3767 yes you can
@@KentuckyWashPros what is the name of the gun?
Killer, to the point vid. You wrap those fittings up like Doc Holliday spinning his 6 shooter😂! Thanks!!
Thanks! I've been wanting to built this setup but couldn't find all the parts 👍🏾
Awesome Thanks!
How's the gun on your hand and wrist? Does it require a strong squeeze? Looking at this one but don't want something that burns out the forearm after a job. Thanks!
It depends on your unloader. We use the flow unloaders & don't have the spike when you pull the trigger. Thanks
Thanks again
Can you use this setup with a 12v softwash system
I have not tried, but with the correct tip it may work. Thanks
Thank you sir, just ordered my setup! I hope you get some kick back the websites..
Awesome. No kick back but love to help! Thanks
Awesome video man
Will these work good for a 4,000 4gpm pressure washer ?
Yes. Just make sure you purchase the correct GPM. Thanks
Can you downstream with just the m5 ?
We use it for downstreaming with a remote box. Thanks
Can you downstream with this set up? I’m guessing you’d use a remote set up? Does Chem come out both shooters?
Yes, we used this set up to downstream. Both tips will pull soap & we did use a remote box. Thanks
Where are the quick connects from that u screw into the dst holder
I think I got them from Southside Eq. Any 1/4" connection should work. Thanks
Very informative... Thanks.
Great Frickn video Brotha! So simply and concise. As appreciative as I am for all the other content out there, some videos have a lot of unexplainable babble, which leaves more questions than answers.
Thanks!! I completely understand when all the details are not included. Thanks for watching!!
How much psi does the M5 handle? It doesn't say on the product page. I have 4,200psi 4gpm simpson pressure washer.
I am not sure about the PSI. We did use onw with our 4 GPM unit when we had it. It has a bigger orifice so you will not get 4200 PSI. Thanks
Is this a good set up for a homeowner for cleaning windows and periodic house washing?. I was thinking about the xjetm5 to add some soap to the application
For a homeowner, the X-jet may not be a bad choice. I have not used the X-jet, but heard it works pretty good. You can also use it with a homeowner pressure washer. Hope this helos. Thanks
Thanks for the video Matthew McConaughey
Why did you put galvanized steel component in that setup? Knowing that it is highly susceptible to rusting? Wouldn’t aluminum or stainless have been a better choice?
Stainless or aluminum would have been a better choice, but the galvanized nipple has not rusted at all and I was able to get it locally on the quick. Thanks
Great content. Nice setup!
Thanks!!
Is this set up for soft washing and rinsing only?
Yes with a pressure washer. Thanks
does the sprayer swivel at the base?
I have the swivel on my ball valve. Thanks
This is sick! ✌🏻
Thanks!!
Is that just for soaping a house or how would I rinse without pulling soap since I use a 5 gal bucket to downstream?
You would need a remote shut off system. I use a downstream box I made. The flow pro is a great option. Thanks
I used to have a xjet m5, it seems to have tons of overspray/ seemed all over.....do you get that with this twist?
The M5 twist do have over spray. But it was not too bad. I have been using my AR45 gas roof pump with the red gun & it has been working a little better. Thanks
Are you down streaming with both of those tips
Yes sir. I downstream & rinse with both tips as well using my remote DS box. Thanks
Is it called vst holder?
It is called DST for Davis Shooter Tip. Thanks
@@allproexteriorservicesllc5338 thank you sir
Could you post a video of gun in action?
Yes sir. I will upload something later today. Thanks
@@allproexteriorservicesllc5338 thanks I actually saw you using one in the pervious video. I immediately ordered the parts on your list to build my own. Thanks for your awesome content! 👍
Oh yea, two best tips for efficiency.
Agreed! Thanks
Nice setup. What tip do you use when cutting in while surface cleaning....like steps? Peace!✌
I use my fan tip meg tip. I usually do the cutting in after so I can get as much with the SC as possible. Thanks
Are the big box store plumbing fittings rated for the high pressure?
I think they may have some. I normally just order bulk from a preferred vendor. Thanks
@@allproexteriorservicesllc5338 Thanks! Can you share the vendor name?
@@briantorsell I use Southside Eq. & Pressure Washer Products. Thanks
Hello... question here, that Kyle davis shooter tip is for shooting soap or high rinse...??? I have northen tool 5.5 to 6 Gpm, what would you recommend...??? I have Jrod (no assasin tip) witch have served me well but some times I'm falling short to reach house peaks with soap and rinse. Thanks.
I use a remote down stream box and it allows me to soap & rinse with the Davis shooter tip. Great tool to have. Thanks
I’ve been using a cheap Suttner ST-1100 for around 8 months now downstreaming 12.5 and have had no problems until a week ago. Internal started leaking. So purchased and 2315 as it has the stainless housing and ceramic ball. Wish they made them in safely orange because I almost bought the 2305 just for that.
But I want to know where you got your shirts.
Awesome!! I am loving the new gun. I had my guy who is in the shirt business get them made from a jersey company. I am trying to get him to put something together, but he has been slammed. I will work on something. Thanks
How can I connect the gun to my chemical hose with a standard 3/4 fitting? Any type of reducers or adapters to be able to convert to a 3/8 quick connect?
This is a high pressure gun made to use with 3/8” hose. Not sure how much pressure you are running. Thanks
@@allproexteriorservicesllc5338 do you use it for soft washing though, and if so, do you personally use the 3/8 hose to soft wash ? Appreciate the feedback
@@anthonyllanos4768 Most consider the M5Twist a soft wash set up. I am only putting out maybe 500 PSI. I use this set up with my pressure washer and 3/8” hose. Thanks
the links you put dont work anymore, nice gun setup though
Thanks! I will try to update them.
All those links are not working?
Maybe they expired. Here is the nozzles & they have the gun as well. www.panhandlepowerwashsupply.com/c-r-shooter-m5-twist-combo.html
Can you do one for me 5 gpm unit how much
I don’t stock the parts. However, it is real easy to do. Just make sure you get the tips for your GPM machine. Thanks
where did you order the gun from?
I got the gun from Pressure Washer Products. Thanks
@allproexteriorservicesllc5338 thank you ordered one !
Will the orange gun run my 4gpm 4000psi?
Yes, just make sure you get tips for the 4 GPM. Thanks
Do you have issues with it leaking?
No issues as of now. Thanks
I've never seen this before! Amazing, lol. I'm hoping this will work for my 4gpm with the correct tips of course... By the way are you still selling your remote downstream boxes??
Thanks!! I have not been selling the remote boxes lately. We have been to busy and don't have much spare time. Thanks
@@allproexteriorservicesllc5338 would you consider making one for more than what you usually charge? Hahaha. I can't seem to find a preassembled box anywhere online.
@@yambe3767 I may build a couple when we start to slow down. Business has been off the charts this year. Thanks
Did you end up trying this out with the 4gpm? If so I would like to know more on your setup.
I ordered the gun from your link over a week ago and still haven't got confirmation email that it's been shipped. Any insight?
I would call them. I know the supply chain is crazy right not, so there may be delays.
@@allproexteriorservicesllc5338 yeah they had to exchange the orange for a green. Fine by me, once it shipped it was here in 2 days.
Awesome guns, I use the blue one. Get after it.
Thanks Don!!
Damn... that's some Mandalorian stuff right there... 😅😅😅😅
Is this particular gun rated for a 12gpm?? Or is that the max it could handle? I'm building the se as yours but the 4gpm setup. Thanks in advance!
The M5 Twist I use is rated for 7 to 12 GPM. Thanks
Why don't you just use the adjustable nozzles that HD sells. You can use same nozzle twisting to a fan or straight shooter
I am not sure the HD nozzles are rated for my big machine. I will check it out for sure. Thanks
well this work on 1,600 PSI 1.2 GPM electric pressure washer. Should I get 2,000 PSI or higher for performance.
I am not sure with that low of volume. Thanks
video could have been complete if shown how it works after being made
I have additional content on the channel demonstrating me using this set up. Great gun for downstreaming. Thanks
bro I ordered the same thing from them and they forgot the m5 twist on my order
Thats not good. Hopefully they will send it overnight for free. Thanks
✌️
👍👍👏👏
Hmm 🤔 never think of the gun to be honest
🎉
Expensive loss when it happens
Agreed!! It burns me that I let it happen, but it will not happen again!! Thanks
Lmao buy a mtm sgs35 best gun on the market
Doubt that but okay.
@@allproexteriorservicesllc5338 what is better then?