Hydraulic Disc Brake System Bleeding / Oil Replacement Procedure ft. Honda H'ness CB350
Вставка
- Опубліковано 6 жов 2024
- How to bleed disc brake system in motorcycle.
PLEASE DO NOT TRY THIS AT HOME
Thank you for your love and support.
#hondacb350 #discbrake #service
Very well explained. Thank you.
If possible, please also make a video on how to properly dispose waste fluids like the bled brake fluid, old engine oil, coolant, etc.
Engine oil should be given to recycling as they are no bio degradable ans cause damage to nebourhood and environment . You can just give it to local mechanic shopes . Coolants and Other non lubricantinh oil s are rarely replaced completely need not be thrown down to environment . Also they are in much smaller qty
Please try filling oil from bottom point ,point were you bleed the oil committee g from top .Here you need to pump oil from bottom to top with pressure . This process removes air as oil moves to top canister (resovior) still you will need to pump lever little to gain pressure .
A request from your subscriber.
Can you make a video of installing a tachometer to Honda cb350?
No where to find an installation guide
Let me check. Will try for sure.
@@DipayanBose ✌️✌️
+1
Is it necessary to do bleeding? Can i just add more oil since my oil level has reached below lower point mark. I am using different brand oil.
You can buy Allen screws provided you need an Allen key
Hey Dipayan, I’m planning to clean my rear calipers and was curious to know if removal of the rear wheel is necessary to get access to the rear caliper
@@AlienFoka yes you need to remove the rear wheel.
@@DipayanBose Hey, I already did the job and luckily without removing the rear wheel. Thanks for the reply tho 🍻
Is it necessary to do bleeding? Can i just add more oil since my oil level has reached below lower point mark. I am using different brand oil.