When he said he was going to change to an electric motor, I was pretty disappointed. Then he came back with this nice simple mechanical design. Very clean, good work.
"I didn't have the bricks to do this part, so i did this instead" You, sir, have captured the essence of minecraft. Just figuring out how to make something work instead of trying to get the materials to make it "perfect" Nicely done.
I like how you spent time tryna figure out how to use a lever to activate gears and then in the end was just like oh yeah levers. Looks so good, wish I could buy one. I could see it being a full set or as a display piece at some con
As suggestions for another, if you decide to later on, would be to have the telescoping shaft, like in Bedrock, which should allow it to proportionally extend as far as it would in-game. Along with racks and gears in between, for the even movement, you should be able to have it motorized, though it may be slow due to the weight and taking into account the mechanical disadvantage. Perhaps having the lever control a gearbox on the inside to extend and retract it with each of the connected gears moving the rack(s) out of reach of itself at both of the furthest points to ensure there wouldn't be any damage caused to the pieces, as the motors continue to spin, while the other gear, which would be disconnected from the motors in the meantime, is still engaged to the rack to move it back when it's switched. I may be overthinking it and it could be expensive to get what you may not have already. Good work, though.
Too complex? You wrote a whole paragraph explaining something that would usually take a sentence to write. Not insulting you or anything im just saying its a lot of information.
@@avergreengreen950 I understand. As I put, I may be overthinking it and my ideas are usually complex in description, perhaps unnecessarily, though I wanted to make sure it was clear what I had in mind.
The moment I saw this vid I thought of a way to make the lever work that was literally what you ended up using. xD So glad you used it instead of those other complicated mechanisms. Good job! Looks great!
Could have dropped the inner support structure down one block and hid the wheels there. Attaching them to the piston beam instead of the piston head. Very cool video!!!
This is amazing, I can't believe how good it looks too... well except for the back of the actual piston bit 😂 but who cares about that, well done mate!
I love the design, the only problem i had with it though is that on the piston extender (The Tan part of the piston), in the back you can see all of the green, red, and colorful bricks that you don't see in the game. Maybe close that off?
I know like nothing about how much space the mechanics take up, but it’s possible that he can’t cover it up because the mechanics are in the area that the blocks to cover it up would go.
Man this is so awesome you put some much effort in to these hopefully one day your Channel will get the recognition you deserve for such masterful builds Keep up the good work
It’s amazing and honestly I knew you wouldn’t be able to make the piston life sized or extend it to the same ratio since it literally extends double itself and that much couldn’t fit inside the piston
This was a fun watch, I love your concepts and building process, and your fun narrating voice :) Some feedback I have for the thumbnail would be that the build itself is so huge, it isn't immediately recognisable as Lego; so audiences may only understand the concept from spotting the tiny logo, or (God forbid) actually reading the title. Maybe changing up the background in the second one or making it clearer that it's Lego would help!
I fell sad for this man. He puts his heart and soul to all this and he barely gets any views. You know what I’m gonna be a nice guy and I’m gonna share his videos on my Discord.
I fell sad for this man. He puts his heart and soul to all this and he got 15 likes and 1 reply. You know what I’m gonna be a nice guy and I’m gonna share his videos on my Discord. is just a joke lol
fun fact: when levers are placed on a piston and activated , the lever actually breaks because the piston ceases to be a block in that short moving moment
Earlier in the video I kept thinking why you didn’t use the technique for the piston at the end of the video until i watched it and saw you implement it into the piston
![100% WORKING LEGO® Enchanting Table [Minecraft]](/img/n.gif)
This is not only a nice looking build, but it’s super functional! Editing well done
yooo td bricks
TD BRICKS sacred is stealing all your *glizzy* pieces again…
Thanks Ty! Really put all I had into this build so I’m glad you like it!
Yo, it's TD BRICKS!
I love your videos man
How you designed the final draft of the mechanism was very smart. Nice one!
Thank you!
@@RJMBricks hello
Omg
W
W
When he said he was going to change to an electric motor, I was pretty disappointed. Then he came back with this nice simple mechanical design. Very clean, good work.
Yeah same especially because he fixed the issue of before with the wheels
I don't cer losers
Ops
@@mackcoath2301 shut up bro get back on UA-cam kids
@@mackcoath2301 are you ok?
"I didn't have the bricks to do this part, so i did this instead"
You, sir, have captured the essence of minecraft.
Just figuring out how to make something work instead of trying to get the materials to make it "perfect"
Nicely done.
It's pretty much the essence of a LEGO enthusiast as well. I very rarely have exactly what I wanted but I make it work with what I have.
@@ebolarnator1794 fax
I want this as like an actual set, this would be so dope to just use randomly.
But then his wont be as special.
Oh totally, if this could be made to be like a 8cm^3 cube it would be really nice.
Bruh it would cost more than $1000
@@ArunaUtd for the lever. The Piston will be an add on
UCS
I like how you spent time tryna figure out how to use a lever to activate gears and then in the end was just like oh yeah levers. Looks so good, wish I could buy one. I could see it being a full set or as a display piece at some con
"Let's make the lever work like a lever!!"
Yo that’s sick dude!!
Thanks!
What music do you use?
Ya
Brick science
It's yo friend
So much patience and creativity needed. You are so talented!
'Hui3uirjhejehgwfsxzgwygwfsgshshsjjwuwgsgshhsgwgwgegs
The basics have been figured out.
So when can we expect to see the 3x3 piston door?
Theyre not sticky yet
@@FabioKun not yet
@@FabioKun nothin' duct tape cant fix
@@azurezephyr4526 nothing more lego couldn't fix
We need to make it sticky first but that shouldn't be too hard
ngl this should be a real lego product. I can see myself flicking that lever all day just because it's so satisfying
Well, it would be VERY hard to build.
$1000 lego set incoming
@@mrgoofy6015 It'll be likely to be a 18+ Minecraft set
You gave me idea. I will make my own on my 3d printer
@@mrgoofy6015 no, it wouldnt
So cool, and I bet some Lego museum would be greatly willing to buy that. The functionality is particularly impressive.
Yea they actually would I mean give a round up a plause for this guy
@@jennifergibson4733 round of applause, not round up
Yes, you’re cool for calling me out for calling someone else out.
@@therealdoc he's using his mother's account he's probably 5
This is one of the most amazing things I've seen built out of Legos.
Such a cool build with an unique idea! Keep up the great work mate!
Thanks so much!
No haha yes lol
@@Jayjay-ni6vo ?
ga
Why are you reading this?
dude, this is one of the most ambitious lego vids i have ever seen, and i've been watching lego videos for 7 years.
This is unbelievably brilliant.This content is absolutely mind boggling.subscribed.
How did he do it
@@chrisswinney3522 how did who do it?
@@Enraptored- he is just stupid bro dont worry about chris swinney
Oh hi beta
@@Mr-Raptor Gooday good sir.
Lever breaking when ontop of piston: i am about to end this guys whole career
I didn’t know it was possible to do something like this with Legos impressive
yes
Somebody built a lego Wall-E that turns into a cube, and that was years and years ago. never underestimate the power of legos.
Mumbo Jumbo: _Creates AMAZING Minecraft Builds with redstone_
RJMBricks: *We need to go deeper. We HAVE to.*
Achievement Get: We Need To Go Deeper
What a masterpiece. Wish I have that epic piston.
Thanks so much!
Why does the actual comment have more likes than the RJMBricks reply
@@game-r3s yes
@@RJMBricks Could you pleas make an tutorial for bricklink I would love to build that
tat's the best building in my life. I haven't seen better that🥰🥰🥰🥰
This guys deep voice making Humor with no effort is so funny. Epic content dude, get that lambo
As suggestions for another, if you decide to later on, would be to have the telescoping shaft, like in Bedrock, which should allow it to proportionally extend as far as it would in-game. Along with racks and gears in between, for the even movement, you should be able to have it motorized, though it may be slow due to the weight and taking into account the mechanical disadvantage. Perhaps having the lever control a gearbox on the inside to extend and retract it with each of the connected gears moving the rack(s) out of reach of itself at both of the furthest points to ensure there wouldn't be any damage caused to the pieces, as the motors continue to spin, while the other gear, which would be disconnected from the motors in the meantime, is still engaged to the rack to move it back when it's switched. I may be overthinking it and it could be expensive to get what you may not have already. Good work, though.
God damn what do you want this man to do, build a rocket???
@@avergreengreen950
Is my description too complex?
Too complex? You wrote a whole paragraph explaining something that would usually take a sentence to write. Not insulting you or anything im just saying its a lot of information.
@@avergreengreen950
I understand. As I put, I may be overthinking it and my ideas are usually complex in description, perhaps unnecessarily, though I wanted to make sure it was clear what I had in mind.
keep up the thinking, itll lead u somewhere in life that'll be sweet
8:01 I knew making the lever longer would make it feel lighter. I'm glad, I think it's way cooler if it's mechanical.
Just found your channel. very cool. Only thing I need to say is never cut toward yourself always cut away, be safe
The moment I saw this vid I thought of a way to make the lever work that was literally what you ended up using. xD So glad you used it instead of those other complicated mechanisms. Good job! Looks great!
Could have dropped the inner support structure down one block and hid the wheels there. Attaching them to the piston beam instead of the piston head.
Very cool video!!!
Wow, this is such a nice build!! I mean, the finished product looks truly incredible! 👍
Hi
The best Lego creation, it would be great that your creation were an official Lego.
This is insanely well crafted. It definitly is big.
That final result blew my mind
Ik he always makes amazing builds but this was just so cool
Dude that looks so realistic and the fact that it actually works is literally amazing 🤩
damn, it's really cool man, keep going
This is amazing, I can't believe how good it looks too... well except for the back of the actual piston bit 😂 but who cares about that, well done mate!
I love the design, the only problem i had with it though is that on the piston extender (The Tan part of the piston), in the back you can see all of the green, red, and colorful bricks that you don't see in the game. Maybe close that off?
I know like nothing about how much space the mechanics take up, but it’s possible that he can’t cover it up because the mechanics are in the area that the blocks to cover it up would go.
Instead of using wheel outside, I think you can use those in the inner structure connecting to the beam making it stable and running.
Nah
apa bang
This is very nice and beautiful project
Man this is so awesome you put some much effort in to these hopefully one day your Channel will get the recognition you deserve for such masterful builds
Keep up the good work
He took his time just for us- this man deserves more recognition-
This is cool and I hope this channel grows even more
I love how you say when the wall is finished I hear the doorbell and then the screen went out
3:37 nice house you got there, lol.
It’s amazing and honestly I knew you wouldn’t be able to make the piston life sized or extend it to the same ratio since it literally extends double itself and that much couldn’t fit inside the piston
This is probably one of the coolest lego builds ever😋
Man this is just TOO perfect
impressive work! looking very good. keep up this high quality content, man!
Great build! One of my favorites from you. For the end you should maybe let the music play a bit and put hyper links to your other videos.
This is so good,you earned a sub! Great job mate!
This is impressive. You should send it to lego. This would be such as an amazing Lego Minecraft Set!
Super freaking awesome. I really enjoyed seeing this being finished.
That is literally so cool. keep up the amazing work!
I don't think i would be able to build this in that amount of time but I saw you, and you impress me!
its so nice what u can do with just legobricks really make your imagination come to life! Anyways keep up the great work
Your builds just keep getting better and better!!!
This was a fun watch, I love your concepts and building process, and your fun narrating voice :)
Some feedback I have for the thumbnail would be that the build itself is so huge, it isn't immediately recognisable as Lego; so audiences may only understand the concept from spotting the tiny logo, or (God forbid) actually reading the title. Maybe changing up the background in the second one or making it clearer that it's Lego would help!
Thanks for the opinion!
I read the titles
@@RJMBricks No problem! I've noticed the change and I think it's an improvement :D Hope it's helped for views!
Dude just came across your channel and I'm really impressed. Definitely glad that this was the first thing in my recommended.
Nice. Now add an end rod and a sheep and it will be perfect.
I fell sad for this man. He puts his heart and soul to all this and he barely gets any views. You know what I’m gonna be a nice guy and I’m gonna share his videos on my Discord.
me too!
I fell sad for this man. He puts his heart and soul to all this and he got 15 likes and 1 reply. You know what I’m gonna be a nice guy and I’m gonna share his videos on my Discord.
is just a joke lol
yeah he got over 8 million views
Wtf was I on 2 years ago
Round of applause for this guy, everyone
👏👏👏👏👏👏👏👏
I would absolutely buy this as a set! This looks incredibly amazing.
Wow you really get a lot of pressure into that I liked it
Its such an amazing build, you used a lot of complex mechanics. I hope your channel booms💥
I love this build. 😍
The editing could see some improvements, but that aside it was a very good video.
Keep it up! 👍
As a Minecraft veteran I know that that lever would actually pop off when activated and cause a 0 tick piston. This is unrealistic!
I was about to say that
Bro spent so long building this and now you complaining of on miniature detail
This is like the coolest lego invention
Amazing build!
I would've made the slots for the wheels also green tho and a more uneven grass surface so it blends in better. Still great work!!!
fun fact: when levers are placed on a piston and activated , the lever actually breaks because the piston ceases to be a block in that short moving moment
Only if you're playing on java edition
So he made a piston from bedrock edition!
It was changed I believe in 1.16 or 1.17
Imagine if this was a lego set
I will buy it
@Leonardgalvan-gq9yg same
@@Leonardgalvan-gq9ygsame
Earlier in the video I kept thinking why you didn’t use the technique for the piston at the end of the video until i watched it and saw you implement it into the piston
Lets just Appreciate How much Skill and pressure he did on this
You can improve the back of the piston head by putting tiles on it so it isn’t just a bunch of random colors
Yea but question can you see those blocks
I was literally mesmerized by this video. It's amazing! Keep up the good work, mate ♥
Him opening the box full of grey and dark grey blocks is asmr
so talented I could never figure out how making a piston out of legos would work
Let’s be honest, you NEED to make a full step by step tutorial series on your mechanisms!!!
2:20 *two lambos
8 lambos*
1,00,000 lambos
You need to send that to lego ideas so amazing!
I WANT THIS FOR MYSELF, BUT I AM OF COURSE RUSSIAN, I LIVE IN RUSSIA, I TRANSLATE USING A TRANSLATOR SO THAT YOU UNDERSTAND ME
Дарова
F
😂😂😂😂😂😅😅😅🎉😢😢😢
@@NGYU3даров(я русский и английский, но я живу в России)
@@ОМАГЕТПОКОбро не используй переводчик сам переведи гений
Wooooow this is so good Man keep working
He is so dedicated he needs more likes and subs
Amazing work!
Imagine having visitors then the visitors' kids just go wander around your room and disassemble the piston :(
I like your channel, I like all the stuff things you do keep on the good work
it's amazing and functional. and good 10/10
THAT'S ACTUALLY SO COOL!!!!!!
Your a mad man. Great job
8:58 now what are you gonna do with it 😂
So cool!
Missed opportunity he could have made a sticky piston just like this but with normal Lego bricks
This is so satisfying
This is so good ,respect
Amazing! Next can you do a flying machine?
This is crazy so many lego you have
thats so huge bro its amazing
Dis is sick bro!
Sick build
I was mad confused with his first design for the lever/ piston action system. You can even do it without any gears
This is very
cool
awesome video man 💪💪
so good my lego builder 10/10
PUT THIS ON LEGO IDEAS NOW its very cool as long as it doesnt have "illegal" building tecnics