thank you so much i learn much from your videos
Hello, sir! If the injectors were not put in the correct order after getting them out and cleaned, it is neccessary to code them and follow these steps? My dpf it s not working anymore and i think i can skyp that step. Thank you!
This is not good for used injectors , one of my injectors has died after i did this!!!
Did you ever check this value: Injector valve 1: capacity-CAPA_INJ_MAIN[0] and same for 2,3 and 4?
Hello if I do not replace injector then "adapting injector minimum deviation quanity" would be an advantage for the engine?
It is the same process ,even you have dpf off?
Tried to do this adaptation but without dpf regeneration, waited 1h 30min and still not finished, now my car running very bad, any ideas what to do
@@arturs6913 writed pre diesel gate map file and problem gone forever
@@iancartmell8252 problem is that it was diesel gate software and in the frony of maf sensor was that diesel gate fix pipe. I took it out and downgrade software to pre diesel gate version and adapted injectors just by driving it around town
Hi there, I have a VW Golf 7 GTI engine code CHHA and I changed all 4 injectors but I can't find the adaptation channel for entering the new injector codes... it is not available on my VCDS. Using version 23.3.1
Any solution? Thank you
Tank yuo
Hey, i have a Golf 7 2.0 TDI ( EA288 ) and i changed my Injektors too ( all 4x ) and i dont have the " Options " for Injektor Adaption in my VCDS. I Got the Pro Version and 100% Original.
Why?
Hi
When do we need this process
I’m doing it right now, its taking more than half an hour should i stop it?
Hello,
I have Audi A3 (1.6 TDI 2012). I have cleaned the injectors. Do I need to adapt? I tried to do it like you do in the video. But "adapting injector minimum deviation quantity" took too long and was not completed. I waited an hour, but it's not over.
Can you help me with that?
That means that you have another problem-probably egr dosnt work properly
You must need every code on the injector injector 1,2 ,3 , 4reset and adaptation and start the car
Insert 27971 acepted
Go in basic seting adaptation amount deviation injector
Pres klutch and breake release
And pres pedal gas and release
After 15 20 min is finsihed
Ever 1.6 tdi posible work this but need software after 2016
Old software dont posible work
Every ecu withouth dpf and egr (off)
Dont posible working this process
In this situation you need new software
Services dpf and egr fixed
And you have new car
Thank you
Car needs to be at it's operating temperature. Don't perform this action with cold engine.
Nice
The " adapting injector minimum deviation quantity "" function should be performed ONLY when replacing ALL injectors with brand new ones !
Hi good afternoon, I am about to buy from Darkside 4 new Bosch injectors for my golf TDI MK7 TDI with a CRUA engine. I would like to know if after replacing them, I will need to complete this process of adaptation? because they also have for sale this software.
what happens if after adapting injector minimum deviation quantity it sais finished time out ? i have an vw polo 1.6 tdi 90 hp
can this be done correctly when car has costum ecu map?
Hello, befor opening injectors for my vw mk7 I numereted them from1 to 4 . I changed there rings and replace them in there order. But my car lossed 40% of here force. Why please? Should I reprogaming injectors in calculator again?
JETTA MK6 2.0 TDI CFFB Is it possible?
VCDS UDS
adapting injector minimum deviation quantity
I have a vw golf 7 1.6 diesel CLHA engine.I put in the service code but in basic setting i can NOT find the minimum injector quantity adaptation option.Do you know why? I am using VCDS 21.9.0
Is this the same way for a motor
Its seen time a very unreliable system injector just really whent wrong with the pumps think vw needs to sort this problem out I need three new injector for my skoda yeti they say there are 2 thousand on back order stuff vw s I will never have another
Is this posible to do whit old software or i need to update software of my car???
make only after injector replace. software VAG need new after 2016 i think
Hi mate, can a clone vcds do that or only original
Hi, for full access to all function in VCDS you need one of the new HEX-V2 HQ clones that fully supports MQB platform
on 1.6 tdi cayb same procedure but it doesn't rev up vcds official not working clone don't working
need launch or vas ?
@@iancartmell8252 vcds is shit for this, launch or odis is better for this
PCR 2.1 ecm read write do
I don't think you need regeneration after changing injector
without regeneration it is not possible to adapt the minimum deviation. but I do not have verified information, I just try
@@golfwagen4173 hi, well? We must do the regen before of adapt? Or is not necesary?
@@golfwagen4173if the dpf is off, i need to do the regeneration step?
HELLO.i have a golf 6 1.6tdi cay motor.i have vcds and today i do the adaptation.the problem is that the car when begin the adaptation is not go 1000-3000 rpm.its 800rpm and the heater its lights on-off .after one hour the car do the same.any help?
I fix the problem alone.i buy a cable with vcds program and fix with minimum injector and it's ok
I want to do this by obdeleven who know what to do
My fuel injection time deviation is:
53us
-23us
-16us
-12us
It's ok or not?
What are they measurment values "us"?
I have read them on my golf 7 via obdeleven
-12us
-18us
16us
18us
Is that normal?
@@merisvilic5862 Hey Did you verify your correction values? Were they OK? I have: 1. -3 us, 2. 20us, 3. 0us, 4. -18 us and sound of my engine seems to me not working perfect.
@@jakubusowicz4945 bro i had to change firts 2 injectors,they was bad.
But i have problem again 2 years later.
My New value is
-10us
-3us
-5us
10us
I don't think you need regeneration after changing injector
@@rafalbonislawski1467 but when the dpf is off do i need to do that step with regeneration?
You are the best...keep up the detailed explanation of what you are testing..like in this video...and you will have a lot of viewers and teach people a lot.