Impact Of Jet On Moving Curved Plate Strikes One End Of The Tip Tangentially
Вставка
- Опубліковано 23 сер 2024
- In this video, i explained Impact Of Jet On Moving Curved Plate Strikes One End Of The Tip Tangentially
. In detail I explained following topic
1. Diagram and animation of Impact Of Jet On Moving Curved Plate Strikes One End Of The Tip Tangentially
2. Velocity triangle at inlet and outlet of curved blade
3. Different parameter of impact of jet
4. Forced exerted by a jet on plate Moving Curved Plate Strikes One End Of The Tip Tangentially. (Force find out for different α 2 Less then 90 degree , α 2 greater then 90 degree , α 2 equal to 90 degree)
5. Work done by jet on the plate
6. Efficiency of the blade.
Video link:
Introduction of Impact of Jet : • Introduction of impact...
Impact of Jet on Fixed vertical Plate : • Impact of jet on fixed...
Impact of Jet on Fixed Inclined Plate : • Impact of Jet on Fixed...
Impact of Jet on Fixed Curved Plate (Jet Strikes at the centre) : • Impact of Jet on Fixed...
Impact of Jet on Fixed Curved Plate (Jet Strikes at tangentially) : • Impact of jet on Fixed...
Impact of Jet on Moving Vertical Flat Plate : • Impact of Jet on Movin...
Impact of Jet on Moving Inclined Plate : • Impact of jet on movin...
Moving curved plate when jet strike at center: • impact of jet on movin...
Difference between COP and Efficiency: • Difference Between COP...
Meaning of a in R134a in Refrigerant : • Meaning of a in R134a
Sensible And Latent Heat : • Sensible And Latent Heat
How to make water from air: • हवा से पानी कैसे बनाते...
Difference Between Cooling and Refrigeration: • Difference Between Coo...
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Super explanation sir... Try to make more videos... this video cleared my doubts..thank u sir👍
Thank you.
All video of impact of jet and fluid power subject is available.
For that visit playlist of my channel
very insightful.great video
Thank you for comment.
Share video and channel with your friend.
Best explanation sir... Bt i have 2 doubts
1.In second case where @2>90, both of u1 and u2 have negative sign.. Why are you cancel those terms sir?
2.what about Fy sir?
Very simple explanation
Your positive comment motivates me.
My goal is to create largest community of engineers in entire globe. Please help me by sharing this video or channel with your friends.
Sir while finding efficiency, work output how Vr1 changes to V1.
Overall input energy is water coming out from the nozzle.
Water coming out from nozzle with velocity V1.
That why V1 is considered.
For example we consider that i eat 5 mango and you eat 3 mango
Relatively i eat 2 mango more than.
So my input is energy is considered 2 mango or 5 mango??
@@bestmechanicalengineering He's asking about output function. Not about input
It always has been V1 from the start not Vr1 because mass flow rate of nozzle is considered here (m/s)=rho*a*V1
In the exit velocity triangle for alpha greater than 90 degree, PR is the U2 na??? V2 is the absolute velocity ,it should connect Vr2 and U2 na?
Correct me if am wrong
Yes
💯
Best explanation in the internet so far 😍😍😍
Thank you for comment.share channel with your friend.
Best explain explain
Why does the velocity of mass flow rate of output energy change from vr1 to v1
V1 an absolute velocity which water comes out of a jet, In ideal fixed bucket the velocity V1 hit the bucket. In this case taken as moving plate with velocity u1. So, the jet of water hits with the relative velocity with moving plate taken as vr1
Nice
Thank you das.share video nd channel with your friend.
thank you so much 🌸🌸👌
Welcome.
Thank you for comment.
Share video and channel with your friend.
brother good explanation , i really enjoyed it.
Thank you for comment.
Share video and channel with your friend.
brother i already suggested this video to my all class friends
@@bestmechanicalengineering brother , please solve the problems related to this method because it is helpful for us to understand better.
Thaaaank you Sir !!!
Thanks ,great
You are awesome all doubts are solved
Thankyou so much sir 🤍💫
Welcome.
Thank you for comment.
Share video and channel with your friend
Nice teaching sir...
Thank you for comment.
Share video and channel with your friend.
why is vr1 equal to vr2, even if the blades are frictionless?
why does the absolute velocity reduce ? V1 is bigger than V2, where did the kinetic energy go ?
Kinetic energy is convert in mechanical energy.
Why do you change vr1 to v1 in blade efficiency eqn
And you liked all other than the same question asked by another viewer
Why dont you replay him
input energy is water coming out from the nozzle.
Water coming out from nozzle with velocity V1.
That why V1 is considered.
For example we consider that i eat 5 mango and you eat 3 mango
Relatively i eat 2 mango more than.
So my input is energy is considered 2 mango or 5 mango??
Same doubt sir why v1 instead of vr1
U r God..
Work =Force×Displacement
Velocity = Displacement /Time
Power=work/time
So,
Power=work ×velocity
Power=force *velocity
Freak out
What is wrong in this video??
Ntg wrong.. I am excited after watching this video... That y freak out
Ohk.
@@bestmechanicalengineeringhmm.. I am freaking and waiting to watch your videos 😍👍
Nice
Thank you for comment.
Share video and channel with your friend.