I'm going to save this video for future reference. I really appreciate no background music, just raw data and information on the Consew 226 with valuable reference information about other machines! Thank you!
Thanks for the refresher mini course. I bought a 225 about a year ago, not realizing it has no reverse. I've been used to using my new 2206RB-14-7-DD since June 2020 at my house and purchased the 225 for using at my shop but never used it yet. Today I figured I would and couldn't figure how to get the hook to grab the bobbin. I've been sewing auto upholstery since the beginning of the plandemic, 2.5 years ago. Never stitched a single piece of vinyl, or anything, prior. I'm self taught with the help of UA-cam and have actually finished several bench seats, a few small projects and an entire interior to a 1963 Ford Fairlane from seats, door and kick panels, B pillars, dash cover and visors. Without the assistance of people like you and other experts, who knows how long it would have taken me to be able to accomplish what I have so far. Thank you very much. Btw, I paid $80.00 for the barely used 225 with table and all! Switched to clutch with a servo. I have a total of $200.00 in the whole set up!
@@thespecialtywreath I recommend a basic variable speed servo motor with a single manual knob to adjust max speed. They are sold under several names such as Family, Tech Sew, Rex, and Consew. Here is a video of one being installed... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html Best of luck!
Hello and thank you . Its been a Long time I havnt seen any Professional Video Explaining about a product ,Very Detail and accurate . Thank you Sir ,I appreciate for very good quality close up detail explaining and sharing is caring )). God Bless !
Thanks for the video. Just picked up an older 226. This video was very helpful. Mine has the larger hand wheel than the one in the video. It came with some 21 needles so I will try them and order some 20’s. Now I just have to learn pattern upholstery. And order a servo motor. Lots of different pricing on them. Thank you
I bought my Consew 25 years ago for $1000 .We have our own Upholstry business and use that machine 😂everyday .Never had to get it worked .Cant believe how much money this machine has made for me
Wish I'd watched this a couple of years ago! So informative, thank you. I first bought a hightex cylinder arm walking foot. I've just bought a 1950s Singer 111g156 which is pretty much what seiko and consew ect copied. Your machine looks and works exactly the same. I'm restoring the singer, so your video has really helped. When I've finished the Singer it's going to be very interesting to compare sewing on a brand new Chinese machine with a 60 plus year old British machine. Both compound feed walking foot machines.
Thank you sooo much! I have been trying for hours upon hours trying to wind my bobbin. The bobbins I have have no holes in them. Just a slit on the inside. I believe I have. 225. Bought it from someone who passed away. I am on a deadline to finish 3 boat cushions by tomorrow. I only have a walking foot and have to insert zippers as well. Now that I have a bobbin and thread ready I went to try to adjust the stitch length and it will only “click” on the 7. What is a good stitch length for sewing boat cushions? I have to check out your videos. I have two more vintage machines, an Elna SU and a Necchi, which I can’t remember off hand which one but it was endorsed by Sophia Loren and the first zigzag to the US I believe. All work like a charm - when working. The Necchi has a bent needle stuck in it at the moment. So I am just starting out to do boat sewing and hope I can get somewhere with this Consew. I did sew new vinyl windows in our dodger for our sailboat. I was amazed how easy it went through two 40 ml of vinyl, two layers of canvas and a strip of leather like butter! Again, thank you for the in depth video on the Consew. Now to go look up how to fix the stitch length and in depth oiling. I have been going through way too much oil. Think I’m doing it wrong. ❤
6-8 stitches per inch will be fine for vinyl. Leather needs a very long stitch length, cotton and garments use a very short stitch. Good luck with the machine!
Really enjoyed this video about the 226. Thanks! Helped me with the threading. Now, would you please show us how to adjust the top thread tension? Right now I'm sewing Levi's denim (don't know the weight ) so when I change to sewing canvas, I can see the bottom thread. I used black on the bobbin and golden yellow on the top thread. So, I can see the dot of black along the seam. Drives me crazy! Thanks for making your videos!
If you're seeing the knot on the bollom of the material, increase upper tension by turning the knob 1/2 turn clockwise and retest. Repeat as needed until the knot is centered in the material. If you see the knot on top, you need to decrease upper tension. Good luck with it!
Concise and Clear. Great refresher for those of us that only seldom use our machines. Mine is a 224-1 Needle Feed but the info you shared translates well to the 224.
Thanks Andrew! I'm impressed you made it to the 13 minute mark. Way to stick with it! Kinda a long video, but I get to rambling when it comes to walking foot machines. Best
@@TheThoughtfulWoodworker I can't quite believe that having only written that last comment a month or so ago, I am now the proud owner of a Seiko STW-8b, which is the same as this Consew! I only got it last night and have so far only cleaned it, but I am here again to watch this video, because, as I said before, it will be soooo helpful!!
Great Video, really clear threading instructions. thanks for all the info & tips. Just starting to use a walking foot & your guide has given me lots of confidence!
Thanks! I believe I will be getting one of these machines soon and this was a TERRIFIC help as to how it works and how to thread it and where to oil it. You are still helping after over a year. And yes, it will be my 1st industrial. I hope it is a great choice for my leather endeavours!
Thank you for sharing your knowledge to the world. Great video. I sew as well and have 2 Consew. 206 RB 2.They are great machines. Viewing from the French island St Martin in the Caribbean.
@@cliffarnold7463 Still not a bad deal. Figure about a hundred bucks for a new servo. Here's a video on how to install one... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html
I don't have any specific shops to recommend in that area, but you can do a lot yourself. I have Consew 226 timing and maintenance videos on my channel.
Thanks so much for this, which I'm just about to watch. I have a Consew 210 with a noise in the motor as though something were touching the fan blades; a kind of very rapid 'ting' ing sound that subsides gradually to nothing on power down. I'd be incredibly grateful if you could do a vid on the 210!🙏
A clutch motor spins all the time, and relies on a friction plate (usually made of cork) to transfer power to the belt and sewing machine. You can try changing the 3/8" v-belt, which are about $5 on eBay. More than likely you'll have to grease the friction plate. It's a common service where you take the clutch motor in half and add about a teaspoon of grease on the friction plate. Helps with squeaking, and makes the motor less jumpy at startup. Otherwise you can replace the motor with a servo for a little over $100. Best
@@TheThoughtfulWoodworker Found out I did not have enough oil in the machine after sitting for an extended period of time, more than 7 years! It took some time to get fluid back into some of the journals but if finally came around. Your video on the clutch motor was great and found an additional oil port there as well that was dry. Very nice to see some good videos for my Consew Machine to learn more how to take better care as i still have the invoice when it was first bought in 1968!!! Thanks sew much!!!
Great video, you mentioned if machine is set right the reverse will plop back in same holes. I just picked up a 226 seems to be in good shape, but the reverse stitching is much shorter than the forward. Hoping you help explain that adjustment
I found the two set screws on the bottom that adjusts where the reverse paddle starts and stops, looks like farther down the paddle travels the larger the reverse stitch but even all the way down it won’t match the forward stitch
@@emahfam Sounds like you found the right adjustment. Make small adjustments until forward matches reverse. It doesn't have to be terribly accurate, but as long as the stitches match for 3-4 holes, most people are happy.
Looking for info to install a needle positioner on Consew 226. Thoughts... Ideas....?? Thanks! This video is great!! Just purchased a 226. Installed Consew servo motor. I like the control of it much better than the clutch motor that was on it.
Hopefully you installed a digital servo motor. You need that type to add a needle positioner. Otherwise it's a pretty easy mechanical add-on. A wiring harness plugs into the servo. That's why the analog servos won't accept one. Good luck with it!
I recently purchased a Consew 226. The video was very helpful. One question. Several owners of 226 machines told me to fill the pan below the machine with oil. There is no reference to this in the video or the operating manual
Sounds like you got some bad advise. The Consew 226 is not an oil bath machine like some modern garment machines. Those do have a taller oil pan underneath and would need to be filled with oil. The Consew 226 just has an oil drip pan to catch errant oil from the machine being manually lubricated. To confuse things further, a similar walking foot, the Consew 206rb sometimes has a small oil reservoir under the machine. That one is different from an oil bath, and it's just a small box with clear window that you fill with oil. It's part of the semi-automatic oiling system on some 206rb models. Those reservoirs are usually empty, apparently because not everyone knows they exist. I'm guessing that's where the confusion stemmed from. Thanks and good luck!
We have talked before and I was wondering if you knew if the needle bar on a Consew 202rb is supposed to have play in it? I keep breaking needles and I'm wondering if this is why. When I start to sew the needle appears to be in the correct position but afterwards it seems to move to the left of the feed dog and presser foot hole. Thanks Again for sharing your knowledge.
Do you have any info on the adjustments that have to be made to get the forward and reverse to sew in the same holes that you mentioned? Cannot find a video on that for this machine. Thanks!
Hi Brian, The forward and reverse stitch length adjustment is actually quite easy, once you know where to look. Tip the machine back and operate the reverse lever. You'll see the mechanism move up and down. There are a couple of stop screws to limit travel. One's for forward and the other for reverse. Make a small adjustment and re-test. Good luck!
@@TheThoughtfulWoodworker Thanks!!! I have a Juki LU-562 that I bought at an estate sale. I was not able to test it but, it looked well taken care of so, I made a gamble on it for $175. As I have been going through it seems to have a vibration issue at higher speeds. It seems like there should be a fine adjustment on the counter balance. I am not sure if I should invest more$$. Does your Juki LU-563 vibrate? Thanks for all the videos! They are really well done. Cheers!
@@christopherh4238 I've had vibration issues in the past. It's not specific to Juki. Usually it means the table legs aren't resting flat on the floor. Try checking that and shimming one leg if needed. I also have a servo and speed reducer, so I sew leather pretty slowly. Best to you!
If we have a small motor pulley and happy with the slow speed, is there any advantage of getting the whole speed reducer setup (extra pulleys)? Would this increase the torque over just having the small motor pulley ?
I find a servo with small motor pulley very manageable. I just turn the speed down on the motor until I like how it sews. A speed reducer will add more torque and punching power, and allows you to crank up the dial on your servo motor. The one downside of a speed reducer is the machine is a little harder to turn by hand. Also, I only like box style speed reducers. Best of luck!
@@TheThoughtfulWoodworker Yes I am very happy with my 45mm gear on my servo as of now ( I am not at anywhere near the max capacity of my machine). I am however just very curious to see if I am missing anything by not having a full blown speed reducer.
I think my button to adjust stitch length is broke. It will only fully depress at 5 and then the wheel won’t move. Ive put oil on the top and bottom sides and pushed the button repeatedly to try to loosen it up. Is the 226R-1 not adjustable? Also…. When I sew, the fabric gathers. It’s just plain cotton fabric. It’s like the tension is too tight. Is there a bobbin adjustment? P.S. ❤ LOVE my servo motor. Now I need to learn how to use this beast. I appreciate your help.😊
The 226R-1 stitch length is adjustable. Make sure you're pressing the stitch adjustment button, and not the safety clutch button. It sounds like you're doing everything right, just turn the handwheel toward you as you hold the button down. I've had Consews and Pfaffs that I thought would never turn, but they usually do. As far as thin fabric gathering, that can be a problem. Loosen main tension and bobbin tension some. Decrease presser foot pressure for thin fabric (the knob or screw on top of the machine, just behind the guide post). Turn CCW to decrease pressure. Best of luck to you.
How does this handle moderate weight canvas and webbing, bag making... is it mostly built for heavy leather or can it also handle lighter projects well?
It does well with canvas and webbing. It's not going to sew silk or anything, but does great on jeans, vinyl, leather, or upholstery weight fabric. Awesome machine for home dec work like sewing pillows and cushions. Best to you.
Hi Karlynn, check out this video at the 10:52 mark for adjusting the outer foot, and at the 11:39 mark for inner foot adjustment. ua-cam.com/video/_FX0yEHOMh4/v-deo.htmlsi=emT6YRH6O9iXcBle It's a 206RB4 but adjustments are the same on the 226. Sometimes it's a knurled knob instead of a screw. Best to you.
Would you please recommend which servo motor i should buy for a consew 226. The clutch motor is to fast for me. I use the machine for patching marine canvas and replacing zippers.
ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html I would recommend a basic servo with one adjustment knob like the New Tech or Family servo. Also sometimes sold as Eagle brand. Avoid the fancy electronic servos unless you need a needle positioner. Check out the video link for how to install it yourself. Best
Depends on availability in your area. North of $1000 in my area for a nice machine with servo. Less if it has much visible wear or needs a tune up. Best of luck with your decision!
@@TheThoughtfulWoodworker Thanks for the info. Guy said he bought a new machine and doesn't need two. We shall see. Will be my first machine if I buy it.
I would recommend 92 weight bonded nylon thread and a 135x16 needle (size 19 or 20). Same needle as a 135x17 but the 16 denotes a leather point. Many good sources on eBay. Best of luck with your new machine!
Thank you for super well done video. Content & delivery is A+ ! I have recently got re-inspired to get back in front of my pristine condition 226R I found on C.L. 15 yrs ago. I’m ready to give up the clutch motor, tired of the noise and lack of control. I extended the lever arm by at least 12” and put a small pulley. Still lacks consistent control and as a beginner it adds difficulty. Because I want to do this once I need your direction on what motor, brand and model would offer best results for stops and start with smooth and repeatable linear speed control. I’m certainly not out for speed so a smaller pulley is probably a must. I believe you mention a 45mm pulley you are using. Thanks again, make more videos ! I would love ones on how to make all kinds of utilitarian type projects. Bryan C
Try this video... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html there's a link in the description box there for the type of servo I use. I like basic analog servo's best. I always set them up with a small motor pulley. Thanks for the nice comments, and best of luck!
I've got a 145c Pfaff and I broke a needle in it and I am having trouble getting the shank out is there another way to get a needle out ? It's like it's Bent or something thanks for your time any help would be greatly appreciated .
Could you be more specific about the servo motor and pulley I need to order for my Consew 226R-1? My hubby watched the install video, but it wasn't done on a consew... so he just wants to know for sure what I need to get. Thanks.
Here is the servo motor I use... amzn.to/40lgKo8 It works on Consew 226R-1 just fine. You might need a slightly different belt length, depending what size pulley was on the old motor. You can find 3/8" v belts on eBay. Odds are it will be in the 38-40" range. Best of luck!
@@andreavinson3916 You can use the large pulley that comes with the motor. Or you can get a 45mm pulley like I do (eBay). The smaller the motor pulley, the slower it will sew. 45mm is about the smallest you can get. Good luck!
On top loading machines like the Consew 226, the bobbin tension screw stays in the machine (instead of popping out like other machines). If you have a small screwdriver held at an angle you can adjust it in place. Open the bobbin slide plate, and rotate the machine until two small screws on the side of the bobbin case come into view. One just holds the bobbin tension tab in place, but the other screw adjusts bobbin tension. It usually has a circular dome or depression around the small screw head. 1/4 to 1/2 turn clockwise, then retest. If you're not getting any bobbin tension, back it out a ways, and then turn it clockwise until you get adequate tension. About twice the resistance of dental floss is what you want.
@@TheThoughtfulWoodworker thanks so much! I’ll give it a try. In terms of drop down guides for the 226, do you have a recommendation? I got one off Amazon that said it fit the 226 but it definitely did not!
I ran into a heavy spot sewing a velour cushioon singer industrial sewing machine, that is pretty much like your consew and it quit picking up the bobbin thread. Any suggestions?
When out looking at the 226 I just brought home, we did at first mistake the button on the right for the stitch length setting. Would this cause any issues I should know to address? It was given a few turns towards user with the right side button pressed in.
thread sock hahaha. I lay down the spool horizontal in a box that fits the thread spool, you can watch the thread move left to right, right to left as it is being used. No worries of the thread unwinding itself.
Try increasing bobbin tension slightly. Also make sure your needle is big enough for the thread you're using. For example I like a #19 or #20 needle for 92 weight thread. Good luck!
Hi. Great video. I have a used 255rb, unfortunately it sat for a while and is very dry, the handwheel cannot move the needle. Do you have a similar video for 255? The manual is difficult as it assumes a lot of knowledge and the pictures are very bad!I've put oil into the main oil reservoir (top of machine) and the well by the bobbin, not sure of other places. I see that you do read the comments and respond, so I am keeping my fingers crossed! :)
Try watching this video on oiling a 206rb-1... ua-cam.com/video/cIC4NeFby_Y/v-deo.html It's similar, and may give you some ideas where to look for the oil journals. I freed up a 40 year old Pfaff that was totally seized, so I have every confidence that you'll get it moving. Just make sure to remove the bobbin case and any loose thread. Remember to use only sewing machine oil. Best of luck!
Hi Sandy, this video will show you how... ua-cam.com/video/1wNBPX8i524/v-deo.htmlsi=3pfLs6ckDBWhiCqW Just be sure to put in a new 135 17 needle first. A bent needle is sometimes the only problem. Best to you.
I'm a complete newbie to this and am looking to buy one. I joined the Upholstery Australia group and found someone selling one for $800AUD. I'm looking for a machine that can sew threw thick leather and be able to do other light work. I hope this is a good machine for a complete newbie like me.
It is a very good machine. Just know its limitations. It will sew up to 10mm of leather, and will also handle thinner fabric and canvas. To get a machine that will sew anything thicker, it's a lot more money, so I think the 226 is a good choice.
I purchased my machine 40 years ago after I took an upholstery class while in high school. I've used it occasionally (approximately 20-25 times since then) to work on friends and family projects. I recently retired from my profession and started upholstering vehicle seats as a hobby. When I press on the pedal, the wheel at times does not spin unless I manually start the to turn it by hand. Any thoughts on what I can do to fix that issue. My machine is supper clean since I keep it lubed and covered in my garage while it remained dormant for over 13 years since my last project.
Take the belt off to determine if the motor is engaging properly. While the belt is off, turn the handwheel to check for resistance in the machine. Often there is a small tangle around the bobbin case that causes drag. Or it could be the belt is too loose and slipping. Good luck diagnosing it!
I managed to get my timing belt on, matched the arrows and the lift arm to the highest position. Everything works and runs the only problem I have now is I have either short stitch length (24spi) or just short stitch length (24spi). I’ve done the whole procedure of the left button, spin the wheel till it clicks and adjust stitch length, however something doesn’t seem as if it’s catching to adjust the length. I’m getting the same length whether it’s on 5 or 24.
Assuming you didn't pop the safety clutch, you might just have a loose set screw somewhere. Look under the machine below the button you're pressing to make sure the cog is in good shape. The button should physically engage with a cog below.
@@123jones8 I’m still trying to figure it out, I’m making sure it’s not operator error and going through all the set screws and stuff like that but still no luck. Being that it’s a new timing belt, has made the top shaft and the bobbin shaft quite tight, which I don’t know is the belt or again operator error. I’m still messing with it but still figuring it out.
@@kadenmcdow3702 Thank you for your reply. I'll keep watching this to see if you figure anything out. Unfortunatlely, I'm out of town so can't be with my machine to try anything. Again, thank you so much for the reply.
Hi, great Vid & thanks. 1. What is the proper adjustment on the flat hook in front of the bobbin case? (I can't seem to get it right.) 2. My hand wheel is very hard to turn. I had the machine lubed, but there is no difference. Can this be fixed, Oh Great One? Thanks!
Hi Linda, first let's sort out why your machine is hard to turn over. If you depress the foot pedal slightly, does it get better? If so that is completely normal (slight pressure down on the foot pedal releases the motor brake). Another way to check is to take the belt off the handwheel. The machine should rotate freely. Now for the bobbin case opener. It should just tap the bobbin case to allow thread to go around the bobbin case. If the bobbin case opener doesn't touch the bobbin case, adjust it to be slightly closer. If it hits the bobbin case firmly, then you need to back it off some. Good luck!
@@WhippestMom If depressing the foot pedal slightly doesn't make the handwheel easy to turn, take off the belt to separate machine head problems from motor problems. If the head is hard to turn by itself, make sure to oil all the spots listed in the manual. Sometimes just running it a while and lubricating it often will fix the problem. Best
I stand corrected. Clutch motor is much of the problem. Hoping to get a servo soon. On the bobbin: if not stopped by the flat hook, it rotates 360°. So, the arrow stays at the hook and my thread tangles. Is there is a cure for that..?
@@WhippestMom Hi Linda, the bobbin case should not rotate 360 degrees. There is a tab on the bobbin case that should be trapped under the throat plate. If someone took the throat plate off to clean the machine, and didn't put it back correctly, the bobbin case would just spin wildly. If that's the case, just loosen the two throat plate screws and turn the bobbin until the tab catches. Tighten the screws again to hold it in place. A servo motor is a good choice. Here's how to install one yourself... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html and here's the motor I currently use... amzn.to/3QAODwp Best of luck!
I was wondering if you could recommend a bobbin winder assembly. Model # and where to buy it. I have read reviews on the one's I have found and confused as to which one to buy. Consew 226 Thank you so much! I have referred to your video like 20 times as I'm working on my machine. Almost there !!!
This is an awesome video! I just got a 226R1 in great shape. I was wondering if you know how to adjust the presser foot alignment, my machine feet seem ever so slightly angled so that the needle is to the far left of the inner presser foot hole. Is there a way to adjust the outer presser foot so its nice and straight? I'm assuming I have to loosen some clamps on that bar, but a lot going on in there and I'm struggling to find a good image or video to do it!
I've had that happen on Pfaff's and Consews. In both cases it was defective (bent) presser feet. I would replace the feet and put a new 135x17 needle in. Do that before you make any adjustments. The main feed dog adjustment is front to back, not side to side.
I'm going to save this video for future reference. I really appreciate no background music, just raw data and information on the Consew 226 with valuable reference information about other machines!
Thank you!
Thanks for the kind words. Much appreciated.
Best
Watch another vid from great intellectual guy,gave me servo motor answer i needed, that guy was YOU. Cheers.
Great guy here ppl.....
Hey thanks mate. Always nice to hear a good word. Best.
Thanks for the refresher mini course. I bought a 225 about a year ago, not realizing it has no reverse. I've been used to using my new 2206RB-14-7-DD since June 2020 at my house and purchased the 225 for using at my shop but never used it yet. Today I figured I would and couldn't figure how to get the hook to grab the bobbin. I've been sewing auto upholstery since the beginning of the plandemic, 2.5 years ago. Never stitched a single piece of vinyl, or anything, prior. I'm self taught with the help of UA-cam and have actually finished several bench seats, a few small projects and an entire interior to a 1963 Ford Fairlane from seats, door and kick panels, B pillars, dash cover and visors.
Without the assistance of people like you and other experts, who knows how long it would have taken me to be able to accomplish what I have so far. Thank you very much.
Btw, I paid $80.00 for the barely used 225 with table and all! Switched to clutch with a servo. I have a total of $200.00 in the whole set up!
Thanks Michael, it's great to hear how much you've been able to accomplish.
I just got my 225 ... and I am in the same place as you when you started.
Absolutely the best, most concise yet informative video on an industrial sewing machine!!
What Servo do you recommend for this machine? I’m looking at one now that doesn’t have a servo yet.
Oh my goodness, you are so kind. Thank you so much!
@@thespecialtywreath I recommend a basic variable speed servo motor with a single manual knob to adjust max speed. They are sold under several names such as Family, Tech Sew, Rex, and Consew. Here is a video of one being installed... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html
Best of luck!
Hello and thank you .
Its been a Long time I havnt seen any Professional Video Explaining about a product ,Very Detail and accurate .
Thank you Sir ,I appreciate for very good quality close up detail explaining and sharing is caring )).
God Bless !
Thank you so much!
ohhhh may this video was sooo helpful.. i wastch over 45 videos and this one is the best thank you
Thanks Star!
Ya, I been using these for a few years and this video is the very best head start for newcomers.
Thanks Doug. The 226 machine is a nice one to run.
Thanks for the video. Just picked up an older 226. This video was very helpful. Mine has the larger hand wheel than the one in the video. It came with some 21 needles so I will try them and order some 20’s. Now I just have to learn pattern upholstery. And order a servo motor. Lots of different pricing on them. Thank you
Hi Josh, here's the servo I usually get... amzn.to/4bMafkn Have fun with the new machine.
The best video I have found on this machine. Well done Sir!
Thanks Rickey!
I can’t thank you enough for this in-depth guide. My ancient 226 came with no manual.
Hey thanks for letting me know. Best of luck with your machine!
Very well done sir. A sincere thank you!!
Aww thanks! Best to you.
Great video. Be sewing for 35 years.
Awesome! Keep it up!
I bought my Consew 25 years ago for $1000 .We have our own Upholstry business and use that machine 😂everyday .Never had to get it worked .Cant believe how much money this machine has made for me
Yep, they are sturdy machines!
Thank you Willy
No problem Jon. Thanks!
I just bought a 226 and your video is the best by far I have found on this particular machine, thanks
Hi Broden, that's great and thank you so much for the positive feedback. Good luck with your new machine!
Big thanks man! Just saved my butt trying to figure out this machine!
Awesome! Glad something in the video was helpful.
Cheers
great video and information
Thank you!
This was a wonderful video. Very informative, answered all my questions regarding my new machine. Thank you so much!!
That's great! I had all the same questions when I got my first walking foot. Glad it helped.
Thank you! I have used my machine for 39 years and you have taught me so much! No more mess ups for me.
That's so cool! Thanks for letting me know.
Best
Great instructional video. No fluff just information, well organized, well presented, and well recapped at the end. Thanks.
Thanks for stopping by. Such a positive comment! Thanks!
Awesome, thank you.
Thanks mate!
I don’t understand why you don’t have more views and subscribers! Your videos are Always great!
Cool, thanks for saying so.
Best
very thorough , thanks for posting, very helpful, it helped me buy one.
Glad to hear! Thanks for letting me know.
❤thank you just got a used consew so you have helped me so much
Thanks Marina! Hope you enjoy the new Consew, they're great machines. Best to you!
Great presentation chief
Thanks for the positive feedback! Much appreciated.
Thank you, I was not aware of two oiling sections.
Glad something in the video was useful.
Thanks
Thanks!
Mate, you are thoroughly thorough. Thanks.
Thanks for watching, hope you found a tidbit somewhere that helps.
Best
Great thorough video. Thanks so Much!
Thanks for checking it out!
Best
Wish I'd watched this a couple of years ago! So informative, thank you.
I first bought a hightex cylinder arm walking foot. I've just bought a 1950s Singer 111g156 which is pretty much what seiko and consew ect copied. Your machine looks and works exactly the same. I'm restoring the singer, so your video has really helped.
When I've finished the Singer it's going to be very interesting to compare sewing on a brand new Chinese machine with a 60 plus year old British machine. Both compound feed walking foot machines.
Nice! Sounds like you have a fun project in store. Best to you.
Thank you sooo much! I have been trying for hours upon hours trying to wind my bobbin. The bobbins I have have no holes in them. Just a slit on the inside. I believe I have. 225. Bought it from someone who passed away. I am on a deadline to finish 3 boat cushions by tomorrow. I only have a walking foot and have to insert zippers as well. Now that I have a bobbin and thread ready I went to try to adjust the stitch length and it will only “click” on the 7. What is a good stitch length for sewing boat cushions? I have to check out your videos. I have two more vintage machines, an Elna SU and a Necchi, which I can’t remember off hand which one but it was endorsed by Sophia Loren and the first zigzag to the US I believe. All work like a charm - when working. The Necchi has a bent needle stuck in it at the moment. So I am just starting out to do boat sewing and hope I can get somewhere with this Consew. I did sew new vinyl windows in our dodger for our sailboat. I was amazed how easy it went through two 40 ml of vinyl, two layers of canvas and a strip of leather like butter! Again, thank you for the in depth video on the Consew. Now to go look up how to fix the stitch length and in depth oiling. I have been going through way too much oil. Think I’m doing it wrong. ❤
6-8 stitches per inch will be fine for vinyl. Leather needs a very long stitch length, cotton and garments use a very short stitch. Good luck with the machine!
Thanks, I like the tip on the small pulley. Lots of good advice.
Thanks so much!
Cheers
Excellent video, thank you. I also learned a lot of terminology for the various parts you talked about in a clear, understandable voice. Great!
Thanks for the kind words Dave!
Best
Best video yet, thank you
Oh thank you. You made my day!
Best
hey NICE presentation; plenty of details; thanks!
Thanks for saying so Dino!
Appreciated.
Best
Amazing video. Very clear visuals and instruction. Thankyou!
Thanks Janet!
Happy sewing.
Really enjoyed this video about the 226. Thanks! Helped me with the threading. Now, would you please show us how to adjust the top thread tension? Right now I'm sewing Levi's denim (don't know the weight ) so when I change to sewing canvas, I can see the bottom thread. I used black on the bobbin and golden yellow on the top thread. So, I can see the dot of black along the seam. Drives me crazy! Thanks for making your videos!
If you're seeing the knot on the bollom of the material, increase upper tension by turning the knob 1/2 turn clockwise and retest. Repeat as needed until the knot is centered in the material. If you see the knot on top, you need to decrease upper tension. Good luck with it!
I absolutely love your videos and they are very informative!
Thanks Barbara!
Excellent Informative Video....Thank you
My pleasure. Thanks for checking out the 226 video.
Great Video! with detailed instruction on Consew 226R-1 which I have.
Maybe someday soon make a detailed instructional video on the Consew 255RB-3.
Good idea. Maybe I will if I get the chance.
Thanks!
Awesome video
Thanks for checking it out!
Great machine. Lots of bike riders i know 30 years ago used this machine for their skins
Yes, the 226 is an oldie but a goodie. If it wasn't for the G size bobbin, I'd probably still be using it today.
I had been looking everywhere for this. Great job! Finally wired mine up today got enough courage now to take if for a spin.
That's great! Thanks for the nice comment.
Concise and Clear. Great refresher for those of us that only seldom use our machines. Mine is a 224-1 Needle Feed but the info you shared translates well to the 224.
Great, thank you!
Awesome video, thanks for sharing! I like your explanation on how to thread the machine @13:14
Thanks Andrew! I'm impressed you made it to the 13 minute mark. Way to stick with it! Kinda a long video, but I get to rambling when it comes to walking foot machines.
Best
I haven't got an industrial sewing machine, but I'd like one. If I ever get one this video will be soooo helpful!
Thanks for the nice comment. I do hope you get a chance to own or use an industrial machine. They are great!
Best
@@TheThoughtfulWoodworker I can't quite believe that having only written that last comment a month or so ago, I am now the proud owner of a Seiko STW-8b, which is the same as this Consew! I only got it last night and have so far only cleaned it, but I am here again to watch this video, because, as I said before, it will be soooo helpful!!
@@lizziel4876 that's so exciting! Have fun getting familiar with your new machine! You'll love it.
Best
Great Video, really clear threading instructions. thanks for all the info & tips. Just starting to use a walking foot & your guide has given me lots of confidence!
Thanks Wendy! Glad you found something helpful.
Best of luck with your machine.
Thank you for this video saved me time & $$$ 😌
That's great to hear! Thanks
226r here;
got a bunch of prewound bobbins,with mine,
Never knew this as im a man, with a learners permit...cheers
Have fun with your 226R. Great machine.
Thanks! I believe I will be getting one of these machines soon and this was a TERRIFIC help as to how it works and how to thread it and where to oil it.
You are still helping after over a year.
And yes, it will be my 1st industrial. I hope it is a great choice for my leather endeavours!
You will like a Consew 226. Very elegant machine, and easy to operate.
Best
Thank you for sharing your knowledge to the world. Great video. I sew as well and have 2 Consew. 206 RB 2.They are great machines. Viewing from the French island St Martin in the Caribbean.
I really like Consew 206rb machines. Very nice to sew with.
Best
Holy cow. That was pretty damn thorough.
Thanks for all of the info.
I found a 226 locally for $400 and was thinking of it as my first machine.
Hi Cliff. You bet. Hey don't think about that Consew 226 deal too long, because that's a great price!
Best
@@TheThoughtfulWoodworker thanks for the reply. I was mistaken. It’s $600 and has the clutch motor… (was hoping for a servo)
I’ll still mull it over.
@@cliffarnold7463 Still not a bad deal. Figure about a hundred bucks for a new servo. Here's a video on how to install one... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html
Thanks for a great video. Learnt so much from it. I'm just starting out.
Thanks for the nice comment!
Best
Thank You so much..could You give me the model of the motor that is in Your machine?thank you❤
Here you go... amzn.to/4bX1tQa
My grandma gave me this exact matchine that she made a living off of. Id like to get it restored. I'm in California. Any recommendations?
I don't have any specific shops to recommend in that area, but you can do a lot yourself. I have Consew 226 timing and maintenance videos on my channel.
Thanks so much for this, which I'm just about to watch. I have a Consew 210 with a noise in the motor as though something were touching the fan blades; a kind of very rapid 'ting' ing sound that subsides gradually to nothing on power down. I'd be incredibly grateful if you could do a vid on the 210!🙏
My belt or clutch screetches all of a sudden on my Consew 18 (circa 1968). motor runs fine. Any suggestions? Very good video by the way!
A clutch motor spins all the time, and relies on a friction plate (usually made of cork) to transfer power to the belt and sewing machine. You can try changing the 3/8" v-belt, which are about $5 on eBay. More than likely you'll have to grease the friction plate. It's a common service where you take the clutch motor in half and add about a teaspoon of grease on the friction plate. Helps with squeaking, and makes the motor less jumpy at startup. Otherwise you can replace the motor with a servo for a little over $100.
Best
@@TheThoughtfulWoodworker Found out I did not have enough oil in the machine after sitting for an extended period of time, more than 7 years! It took some time to get fluid back into some of the journals but if finally came around. Your video on the clutch motor was great and found an additional oil port there as well that was dry. Very nice to see some good videos for my Consew Machine to learn more how to take better care as i still have the invoice when it was first bought in 1968!!! Thanks sew much!!!
Thank you. Very informative I just got a 206rb. And looking for all kinds of info. You really answered many questions
Great! Thanks for saying so. You'll love that 206rb! Great machine.
Best
Great video, you mentioned if machine is set right the reverse will plop back in same holes. I just picked up a 226 seems to be in good shape, but the reverse stitching is much shorter than the forward. Hoping you help explain that adjustment
I found the two set screws on the bottom that adjusts where the reverse paddle starts and stops, looks like farther down the paddle travels the larger the reverse stitch but even all the way down it won’t match the forward stitch
@@emahfam Sounds like you found the right adjustment. Make small adjustments until forward matches reverse. It doesn't have to be terribly accurate, but as long as the stitches match for 3-4 holes, most people are happy.
Great video. I am ready to start using mine again. I got frustrated due to no details videos when I got it.
Thanks for letting me know. Best of luck getting back into heavy sewing.
Looking for info to install a needle positioner on Consew 226. Thoughts... Ideas....?? Thanks! This video is great!! Just purchased a 226. Installed Consew servo motor. I like the control of it much better than the clutch motor that was on it.
Hopefully you installed a digital servo motor. You need that type to add a needle positioner. Otherwise it's a pretty easy mechanical add-on. A wiring harness plugs into the servo. That's why the analog servos won't accept one. Good luck with it!
Great video.
I recently purchased a Consew 226. The video was very helpful. One question. Several owners of 226 machines told me to fill the pan below the machine with oil. There is no reference to this in the video or the operating manual
Sounds like you got some bad advise. The Consew 226 is not an oil bath machine like some modern garment machines. Those do have a taller oil pan underneath and would need to be filled with oil. The Consew 226 just has an oil drip pan to catch errant oil from the machine being manually lubricated. To confuse things further, a similar walking foot, the Consew 206rb sometimes has a small oil reservoir under the machine. That one is different from an oil bath, and it's just a small box with clear window that you fill with oil. It's part of the semi-automatic oiling system on some 206rb models. Those reservoirs are usually empty, apparently because not everyone knows they exist. I'm guessing that's where the confusion stemmed from. Thanks and good luck!
We have talked before and I was wondering if you knew if the needle bar on a Consew 202rb is supposed to have play in it? I keep breaking needles and I'm wondering if this is why. When I start to sew the needle appears to be in the correct position but afterwards it seems to move to the left of the feed dog and presser foot hole. Thanks Again for sharing your knowledge.
Do you have any info on the adjustments that have to be made to get the forward and reverse to sew in the same holes that you mentioned? Cannot find a video on that for this machine. Thanks!
Hi Brian,
The forward and reverse stitch length adjustment is actually quite easy, once you know where to look. Tip the machine back and operate the reverse lever. You'll see the mechanism move up and down. There are a couple of stop screws to limit travel. One's for forward and the other for reverse. Make a small adjustment and re-test.
Good luck!
@@TheThoughtfulWoodworker Thanks for the info. Will try this soon.
You are really good. Very good Do and Don't. May God continue to bless you and your channel
Thank you so much. I really appreciate the words of encouragement!
Thanks for the great video! It is so helpful and clear. What Servo motor kit did you use?
Thanks Christopher, I usually use this servo motor kit... amzn.to/3KPMkoG Best to you.
@@TheThoughtfulWoodworker Thanks!!! I have a Juki LU-562 that I bought at an estate sale. I was not able to test it but, it looked well taken care of so, I made a gamble on it for $175. As I have been going through it seems to have a vibration issue at higher speeds. It seems like there should be a fine adjustment on the counter balance. I am not sure if I should invest more$$. Does your Juki LU-563 vibrate? Thanks for all the videos! They are really well done. Cheers!
@@christopherh4238 I've had vibration issues in the past. It's not specific to Juki. Usually it means the table legs aren't resting flat on the floor. Try checking that and shimming one leg if needed. I also have a servo and speed reducer, so I sew leather pretty slowly.
Best to you!
If we have a small motor pulley and happy with the slow speed, is there any advantage of getting the whole speed reducer setup (extra pulleys)? Would this increase the torque over just having the small motor pulley ?
I find a servo with small motor pulley very manageable. I just turn the speed down on the motor until I like how it sews. A speed reducer will add more torque and punching power, and allows you to crank up the dial on your servo motor. The one downside of a speed reducer is the machine is a little harder to turn by hand. Also, I only like box style speed reducers.
Best of luck!
@@TheThoughtfulWoodworker Yes I am very happy with my 45mm gear on my servo as of now ( I am not at anywhere near the max capacity of my machine). I am however just very curious to see if I am missing anything by not having a full blown speed reducer.
I think my button to adjust stitch length is broke. It will only fully depress at 5 and then the wheel won’t move. Ive put oil on the top and bottom sides and pushed the button repeatedly to try to loosen it up. Is the 226R-1 not adjustable?
Also…. When I sew, the fabric gathers. It’s just plain cotton fabric. It’s like the tension is too tight. Is there a bobbin adjustment?
P.S. ❤ LOVE my servo motor. Now I need to learn how to use this beast. I appreciate your help.😊
The 226R-1 stitch length is adjustable. Make sure you're pressing the stitch adjustment button, and not the safety clutch button. It sounds like you're doing everything right, just turn the handwheel toward you as you hold the button down. I've had Consews and Pfaffs that I thought would never turn, but they usually do.
As far as thin fabric gathering, that can be a problem. Loosen main tension and bobbin tension some. Decrease presser foot pressure for thin fabric (the knob or screw on top of the machine, just behind the guide post). Turn CCW to decrease pressure.
Best of luck to you.
How does this handle moderate weight canvas and webbing, bag making... is it mostly built for heavy leather or can it also handle lighter projects well?
It does well with canvas and webbing. It's not going to sew silk or anything, but does great on jeans, vinyl, leather, or upholstery weight fabric. Awesome machine for home dec work like sewing pillows and cushions. Best to you.
Could you please demonstrate about the inner and outer walking foot tension screws.
Hi Karlynn, check out this video at the 10:52 mark for adjusting the outer foot, and at the 11:39 mark for inner foot adjustment. ua-cam.com/video/_FX0yEHOMh4/v-deo.htmlsi=emT6YRH6O9iXcBle
It's a 206RB4 but adjustments are the same on the 226. Sometimes it's a knurled knob instead of a screw. Best to you.
What is the adjustable servo you are using? And where can I get one? And Thank You for all that you do in your videos.
Here is the adjustable speed servo I like... amzn.to/3rOIjXx It's reliable and very quiet too!
Best
Would you please recommend which servo motor i should buy for a consew 226. The clutch motor is to fast for me. I use the machine for patching marine canvas and replacing zippers.
ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html
I would recommend a basic servo with one adjustment knob like the New Tech or Family servo. Also sometimes sold as Eagle brand. Avoid the fancy electronic servos unless you need a needle positioner.
Check out the video link for how to install it yourself.
Best
This was very informative
Thanks for letting me know Kathy! Appreciate you taking the time to post a nice comment.
Is there a part of the video where you show how to install bobbin and bring up the thread?
ua-cam.com/video/-icatyTFdkY/v-deo.html I cover threading and bobbin in this video. Good luck!
@@TheThoughtfulWoodworker thank you
I have a chance to look at one of these soon. it has the servo motor already installed. What is one if good condition selling for these days?
Depends on availability in your area. North of $1000 in my area for a nice machine with servo. Less if it has much visible wear or needs a tune up. Best of luck with your decision!
@@TheThoughtfulWoodworker Thanks for the info. Guy said he bought a new machine and doesn't need two. We shall see. Will be my first machine if I buy it.
How hard is it to change out the motor and what do I want to look for?
Thanks Liz
Hi Liz, the motor is super easy to install. Here are my tips... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html Good luck with it!
I just bought one and I’m wondering what needle and thread to use to sew Leather like wallets and such things
I would recommend 92 weight bonded nylon thread and a 135x16 needle (size 19 or 20). Same needle as a 135x17 but the 16 denotes a leather point. Many good sources on eBay. Best of luck with your new machine!
Thank you for super well done video. Content & delivery is A+ ! I have recently got re-inspired to get back in front of my pristine condition 226R I found on C.L. 15 yrs ago. I’m ready to give up the clutch motor, tired of the noise and lack of control. I extended the lever arm by at least 12” and put a small pulley. Still lacks consistent control and as a beginner it adds difficulty. Because I want to do this once I need your direction on what motor, brand and model would offer best results for stops and start with smooth and repeatable linear speed control. I’m certainly not out for speed so a smaller pulley is probably a must. I believe you mention a 45mm pulley you are using. Thanks again, make more videos ! I would love ones on how to make all kinds of utilitarian type projects. Bryan C
Try this video... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html there's a link in the description box there for the type of servo I use. I like basic analog servo's best. I always set them up with a small motor pulley. Thanks for the nice comments, and best of luck!
I've got a 145c Pfaff and I broke a needle in it and I am having trouble getting the shank out is there another way to get a needle out ? It's like it's Bent or something thanks for your time any help would be greatly appreciated .
Most needle bars have a hole drilled in them. If yours has a hole, insert a needle sideways to see if you can lever the broken needle out.
Could you be more specific about the servo motor and pulley I need to order for my Consew 226R-1? My hubby watched the install video, but it wasn't done on a consew... so he just wants to know for sure what I need to get. Thanks.
Here is the servo motor I use... amzn.to/40lgKo8 It works on Consew 226R-1 just fine. You might need a slightly different belt length, depending what size pulley was on the old motor. You can find 3/8" v belts on eBay. Odds are it will be in the 38-40" range. Best of luck!
@@TheThoughtfulWoodworker thank you for the quick reply. What size pulley did I need to order?
@@andreavinson3916 You can use the large pulley that comes with the motor. Or you can get a 45mm pulley like I do (eBay). The smaller the motor pulley, the slower it will sew. 45mm is about the smallest you can get. Good luck!
How do you increase the bobbin tension? I’m seeing the loop on the top side of my material at this time.
On top loading machines like the Consew 226, the bobbin tension screw stays in the machine (instead of popping out like other machines). If you have a small screwdriver held at an angle you can adjust it in place. Open the bobbin slide plate, and rotate the machine until two small screws on the side of the bobbin case come into view. One just holds the bobbin tension tab in place, but the other screw adjusts bobbin tension. It usually has a circular dome or depression around the small screw head. 1/4 to 1/2 turn clockwise, then retest. If you're not getting any bobbin tension, back it out a ways, and then turn it clockwise until you get adequate tension. About twice the resistance of dental floss is what you want.
@@TheThoughtfulWoodworker thanks so much! I’ll give it a try. In terms of drop down guides for the 226, do you have a recommendation? I got one off Amazon that said it fit the 226 but it definitely did not!
@@Sinkingshipleather Sorry I don't have any recommendations on drop down attachments for a 226. Might have to drill some holes (yikes!)
I ran into a heavy spot sewing a velour cushioon singer industrial sewing machine, that is pretty much like your consew and it quit picking up the bobbin thread. Any suggestions?
First guess is a bent needle. Replace the needle with the correct type and size for the thread you're sewing and try again.
Best
When out looking at the 226 I just brought home, we did at first mistake the button on the right for the stitch length setting. Would this cause any issues I should know to address? It was given a few turns towards user with the right side button pressed in.
Hey Jordan. It could cause the safety clutch to disengage. As long as the presser feet move when you roll the handwheel, you should be fine.
Best
@@TheThoughtfulWoodworker Okay good to hear, I was a little worried it would throw off the timing! Thanks a million for the quick reply 🙏
Excellent video. Thanks so much for taking the time. I found it to be a very helpful.
Thanks for letting me know. Appreciate it.
Best
Best video
Thanks Evelyn!
thread sock hahaha. I lay down the spool horizontal in a box that fits the thread spool, you can watch the thread move left to right, right to left as it is being used. No worries of the thread unwinding itself.
How to tighten the stitch. Mine is not tight enough on the top. Thank you this video was very helpful.
Try increasing bobbin tension slightly.
Also make sure your needle is big enough for the thread you're using. For example I like a #19 or #20 needle for 92 weight thread.
Good luck!
I have the conew 206rb 3 and it has the lever in the same order as yours
Yes, at some point the lift-up lever of the 206rb-1 and rb-2 transitioned to a push-down paddle of the modern 206rb-5. Thanks for the info.
Hi. Great video. I have a used 255rb, unfortunately it sat for a while and is very dry, the handwheel cannot move the needle. Do you have a similar video for 255? The manual is difficult as it assumes a lot of knowledge and the pictures are very bad!I've put oil into the main oil reservoir (top of machine) and the well by the bobbin, not sure of other places. I see that you do read the comments and respond, so I am keeping my fingers crossed! :)
Try watching this video on oiling a 206rb-1... ua-cam.com/video/cIC4NeFby_Y/v-deo.html
It's similar, and may give you some ideas where to look for the oil journals. I freed up a 40 year old Pfaff that was totally seized, so I have every confidence that you'll get it moving. Just make sure to remove the bobbin case and any loose thread. Remember to use only sewing machine oil. Best of luck!
21:45 how to adjust or set thevtiming on my consew 226 tripple feed walking foot machine.
Hi Sandy, this video will show you how... ua-cam.com/video/1wNBPX8i524/v-deo.htmlsi=3pfLs6ckDBWhiCqW
Just be sure to put in a new 135 17 needle first. A bent needle is sometimes the only problem. Best to you.
I'm a complete newbie to this and am looking to buy one. I joined the Upholstery Australia group and found someone selling one for $800AUD.
I'm looking for a machine that can sew threw thick leather and be able to do other light work. I hope this is a good machine for a complete newbie like me.
It is a very good machine. Just know its limitations. It will sew up to 10mm of leather, and will also handle thinner fabric and canvas. To get a machine that will sew anything thicker, it's a lot more money, so I think the 226 is a good choice.
I purchased my machine 40 years ago after I took an upholstery class while in high school. I've used it occasionally (approximately 20-25 times since then) to work on friends and family projects. I recently retired from my profession and started upholstering vehicle seats as a hobby. When I press on the pedal, the wheel at times does not spin unless I manually start the to turn it by hand. Any thoughts on what I can do to fix that issue. My machine is supper clean since I keep it lubed and covered in my garage while it remained dormant for over 13 years since my last project.
Take the belt off to determine if the motor is engaging properly. While the belt is off, turn the handwheel to check for resistance in the machine. Often there is a small tangle around the bobbin case that causes drag. Or it could be the belt is too loose and slipping.
Good luck diagnosing it!
I managed to get my timing belt on, matched the arrows and the lift arm to the highest position. Everything works and runs the only problem I have now is I have either short stitch length (24spi) or just short stitch length (24spi). I’ve done the whole procedure of the left button, spin the wheel till it clicks and adjust stitch length, however something doesn’t seem as if it’s catching to adjust the length. I’m getting the same length whether it’s on 5 or 24.
Assuming you didn't pop the safety clutch, you might just have a loose set screw somewhere. Look under the machine below the button you're pressing to make sure the cog is in good shape. The button should physically engage with a cog below.
Curious if you were able to solve your problem with stitch length. I have the same problem with my 226. Would love to hear how it turned out for you.
@@123jones8 I’m still trying to figure it out, I’m making sure it’s not operator error and going through all the set screws and stuff like that but still no luck. Being that it’s a new timing belt, has made the top shaft and the bobbin shaft quite tight, which I don’t know is the belt or again operator error. I’m still messing with it but still figuring it out.
@@kadenmcdow3702 Thank you for your reply. I'll keep watching this to see if you figure anything out. Unfortunatlely, I'm out of town so can't be with my machine to try anything. Again, thank you so much for the reply.
Thank you
I really need to know how to thread my 138 pffaff properly
This may give you some hints... ua-cam.com/video/bT24L92CfNA/v-deo.html or download a free copy of a 138 manual.
Hi, great Vid & thanks.
1. What is the proper adjustment on the flat hook in front of the bobbin case? (I can't seem to get it right.)
2. My hand wheel is very hard to turn. I had the machine lubed, but there is no difference. Can this be fixed, Oh Great One?
Thanks!
Hi Linda, first let's sort out why your machine is hard to turn over. If you depress the foot pedal slightly, does it get better? If so that is completely normal (slight pressure down on the foot pedal releases the motor brake). Another way to check is to take the belt off the handwheel. The machine should rotate freely.
Now for the bobbin case opener. It should just tap the bobbin case to allow thread to go around the bobbin case. If the bobbin case opener doesn't touch the bobbin case, adjust it to be slightly closer. If it hits the bobbin case firmly, then you need to back it off some. Good luck!
@@TheThoughtfulWoodworker Hi, TW, The machine was hard to turn when I got it and remains hard to turn attached to the brake motor. Bad bearings? L
@@WhippestMom If depressing the foot pedal slightly doesn't make the handwheel easy to turn, take off the belt to separate machine head problems from motor problems. If the head is hard to turn by itself, make sure to oil all the spots listed in the manual. Sometimes just running it a while and lubricating it often will fix the problem.
Best
I stand corrected. Clutch motor is much of the problem. Hoping to get a servo soon.
On the bobbin: if not stopped by the flat hook, it rotates 360°. So, the arrow stays at the hook and my thread tangles. Is there is a cure for that..?
@@WhippestMom Hi Linda, the bobbin case should not rotate 360 degrees. There is a tab on the bobbin case that should be trapped under the throat plate. If someone took the throat plate off to clean the machine, and didn't put it back correctly, the bobbin case would just spin wildly. If that's the case, just loosen the two throat plate screws and turn the bobbin until the tab catches. Tighten the screws again to hold it in place.
A servo motor is a good choice. Here's how to install one yourself... ua-cam.com/video/Dx_rS9Fzvfo/v-deo.html
and here's the motor I currently use... amzn.to/3QAODwp
Best of luck!
I was wondering if you could recommend a bobbin winder assembly. Model # and where to buy it. I have read reviews on the one's I have found and confused as to which one to buy. Consew 226
Thank you so much! I have referred to your video like 20 times as I'm working on my machine. Almost there !!!
This is the bobbin winder I use... amzn.to/3E92VAx Best of luck with your machine!
@@TheThoughtfulWoodworker Thank you so very much, I'll get it ordered.
Muy buena makina me gusta
Gracias, es una buena máquina.
This is an awesome video! I just got a 226R1 in great shape. I was wondering if you know how to adjust the presser foot alignment, my machine feet seem ever so slightly angled so that the needle is to the far left of the inner presser foot hole. Is there a way to adjust the outer presser foot so its nice and straight? I'm assuming I have to loosen some clamps on that bar, but a lot going on in there and I'm struggling to find a good image or video to do it!
I've had that happen on Pfaff's and Consews. In both cases it was defective (bent) presser feet. I would replace the feet and put a new 135x17 needle in. Do that before you make any adjustments. The main feed dog adjustment is front to back, not side to side.
@@TheThoughtfulWoodworker thanks, I’ll give it a try!