Nilight 60" LED Tail light Strip Installation | Honda Ridgeline
Вставка
- Опубліковано 14 сер 2021
- Welcome to this fresh installment video where my son likes a blue dump truck, the weather gets dark and I announce a winner from the last videos contest. Oh and you know what, I have decided that I will do another giveaway because it feels good. So check out the rules below and enter! Its free!
If you have not subscribed yet, Please go and support the channel by subscribing. Thank you so much!
The Giveaway has ended. Thank you all for participating!
Amazon Links:
Nilight LED tail light strip - amzn.to/3yNnsWl
Flat 4 connector - amzn.to/3g4sCG5
Wire connectors - amzn.to/3yROSL0
Tonneau cover - amzn.to/3iOCBB6
Electrical tape - amzn.to/3CQrGPF
Socket set (Similar) - amzn.to/3sjRfnh
Looks Awesome! I have been thinking of adding a se to my Ridgeline for a while now, but had not seen anyone else do it. Thank you for sharing!
Thank you for all the wonderful videos. Each one step by step. I couldn't ask for anything more! Also thank you for the giveaways!!
Good job, Yuriy! Looks awesome!
Thanks for sharing the experience.
Awesome, getting a new Ridgeline built soon and wanted to add a brake light strip!
Awesome mod! Looks great at night. May need to consider this for when it gets darker. 👍
Waiting to pick up a 22 White, Black Edition next week. I like this upgrade. Thanks for the great information.
Nice work! Been looking for something like this. Especially for the backup light!
Great improvement. Didn't know it was that easy and reasonable. Putting on the to-do list when the temps get out of the negative area. Gawd I hate winter!
How did it work out for you?
i've been eyeing the light strip and now i really want to do this.
Very cool... you can never have enough lighting at the rear. Thanks for showing the wiring info for the harness.
Looks great! I like that the reverse lights are so bright
I have a first gen Ridgeline that I recently added a backup camera to. Seeing the brightness of the backup lights from this strip has me convinced I need to put this on my truck!
Fantastic video! I like that this is a cost effective mod and you show the entire process really well. Thanks!
Looks great! Would like it for my 2017! Thanks for all the content
Sweet upgrade! Looking forward to doing this as well!
Thank you!
This is exactly what I was looking for.
I bought the same light strip on Amazon ans was looking for a video to connect the Reverse wire. Other videos walked you through removing 1 of the tail lights and splicing that way. Your way is much better and leave the connector available if I need it to pull my trailer.
GREAT VIDEO!!
Another great ridgeline diy video. Take offs looks cool. 👌
Thank you Yuriy, for the video. I will install the same LED Tail light on my 07 Ridgeline. They looks really nice!
Great mod ...I really like the backup light function.
Looks really good on the truck! I would love to add this to mine one day.
Looks really really nice, thank you for video/idea!
Should of use a splitter that connects to the 7 pin. No cutting stripping except the backup light. Just take the reverse white wire fron the light bar just hook it to the middle wire of the 7 point plug splitter. It works ! No need to run the wire to your tailight. Just hook it to the splitter harness in the middle.
Nice job, super bright reverse lights are a nice touch
This is awesome ,thanks for the great video!
Just got them for my 2012 Ridgeline. Cant wait for nice weather to install them!
Looks really cool, great video, thanks! I'll be doing mine soon.
Just ordered one of these for my 2007 Ridgeline!
Just bought a used Ridgeline and think this would be a nice upgrade!!!
I've seen the LED lights placed in the red reflectors also looks cool. Yeah, that reverse looks super bright 👍
Yeah, sadly cost around $250 if I remember correctly, this just cost 26 for the dual led
Great video! Seems really bright!
Next mod! thanks Yuri, I will of course wait to see if i win :P
Nice lite strip. Love the look!
THANKS FOR VID AND KEEP THEM COMING!!!!
That is awesome!!! I need one
I cant wait to do something like this on my 21 RTLE
Thanks for another great tip.
Great video, new project on list
That looks epic
Im going to use the Honda connector so I will find a way to connect the reverse wire. Great video.
Looks great!
Nice, I got the the opt7 but I did not like the contradiction in the warranty between them and Amazon, for that reason I went to Putco, I will post my video tonight, awesome 👌
Another great and informative video, love it.
Checking in if you got your oil catch can. Says it’s delivered. 👍🏻
@@YuriyMotso I sure did receive it and it looks like a very high quality item. Thanks again!!
Wow. Well done. 👍
This would look awesome with my rhino dominator hitch step!
Looking good.
Great Videos! If you had to do it again, would you use a 48" version of this vs the 60" --so the 6" on right and left are not angled in?
Looks great...
nice addition
I've been looking to this myself on my 2017 Black Edition. Give it more of a Darth Vader vibe.
I just recently purchased a 2012 Ridgeline. I am concern there isn’t enough truck trim to make a solid long lasting stick(hold) w the Led strip. Excellent video. Tim
Thanks for the video
Great job
Very sharp
Very cool 😎... I'll be doing this on my 2022 Ridgeline BE when I get it in late September 👍... Any LED changes to the front?
Nice job.
That looks awesome. Any chance for a view from the head unit while in reverse? Certainly looks brighter. Also looks like a sad face between the tail lights and the strip lol
I need this!
this would be really cool to add to my RL hope im lucky enough to win
Pretty cool. Need to watch again. Not sure I understand where the flat four connector comes into play. After rewatching I get it. LOL
Flat four connector if you do not wire direct to the harness. Then it’s just plugged into the outlet and that’s it.
Yuriy, good job 👍 once again. That’s a nice addition to the Ridgeline. Will you notify me when I win .😆
Sure will. 😂 As long as your name pops up on the random generator.
Looks great, good job.
Have you done a review on your Husky floor mats?
No I have not. I could make one if you are interested.
when i did mine, i has do but into the plastic bumper space on each end to fit it
Very cool! Quick question, does the excess that is being run up to where it’s visible light up as well? Just wondering if it’s shining on the ground out of you found a way to turn it off.
No, just lights up on the strip that spans the gate. The harness has no additional lighting source on it. The ground was wet so there is a reflection off the ground. It will automatically turn off when the car is off and or when the sensor detects that it’s bright enough outside.
Nicely done. Not a big fan of those blue connectors myself
Yeah. Will see how it holds up. Didn’t want to cut into my harness or do major removal of the cable protection covering so this is kind of what I’m stuck with. In the event it craps out I can revert back to stock no issues. That’s kind of my thinking behind this.
Looks great! If I want to just plug in to the rear plug on my 18 rtl-e would I just plug the wires into the 7 pin adaptor? Thanks
Yes, but you have to plug into a 4 pin adapter.
Get one of your friends who work in aviation maintenance grab you some heat shrink for exterior wiring. Totally waterproof. Wrap, it grab a hair dryer, and it shrinks to fit tight. I work in aviation maintenance.
Yes, I actually may have some somewhere.
Yuriy- As usual, I learned a lot from your videos. I'm a new RTL-E owner, and am trying to learn as much as I can. I've already used your oil catch can video to install this product; curious to see if a new truck will have as much oil caught. regarding the light strip, what was your source for the back up light wire, where did you attach that wire? I don't think that was mentioned in the video?
Thanks Art. Now your question I am not sure I understand? The product has a link in the description, and every single step to install the light is mentioned in the video. What do you mean by, "source for the back up light" and what do you mean by, "Where did you attach that wire?". Power source? If that is what you are asking then there is none. The power is gained from the splice. once the signal is flipped or brakes pressed the power is sent to the lights and in turn the strip which powers the strip.
How did you connect the reverse light? I’m so confused.
One more question. R these strips price point sensitive. Y pay what u get. I saw one video price point $115. Is there an $80 worth difference thanks tim
Add a strong appearance to the truck as well as safety.
Hey Paul! Congratulations on winning the LED strip! If you don’t mind, send me an email which can be found through my channel in the about section. Just title it Paul H giveaway. Thanks.
Did you use the screws they provided? If not, how is it holding up with just the tapes?
No I didn’t. The tape has welded to the vehicle. It’s not going anywhere. I don’t like putting holes into my cars unnecessarily. I can always use a product to remove glue though. Goof off should take off the residue if I ever want to remove it.
You spliced in simply so you can have the led bar and tow at the same time, correct? If not you could have just plugged it into the normal tow jack and unplug it when necessary for towing?
Yes and yes. All preference and I show everyone how to splice in if they ever want to
Mine wouldn't stick to the truck. The adhesive was pretty poor. Even warmed up. Had to send it back.
Mine is now probably permanently adhered to the truck lol
Any updates?
Did you happen to put the plastic clips on it? How is the cheaper sticky tape holding up?
No clips. The tape is now probably permanent 🤣
Size does matter - there is a 49" version of this light strip which fits much better on my 2019 Honda Ridgeline than the 60" version - the 60" version overhangs the install area
It's not by much tho
Hi Yuriy, how's the strip light in your ridgeline truck. Is it still working and no problem?
Yep. I just checked it about a week ago. Every few weeks I inspect when I get to work just in case
Do you need to unplug the connector when you go through a carwash?
Mine is hardwired but it’s weatherproof. Should hold up to carwash
What eould be the wiring for tundra 2021 I troed this sequence and didn’t work
The wiring diagram should be on the receiver cover.
Is the wiring all the same for all trucks
Not sure. One would assume it is as it’s a universally standardized connection. Easiest way would be to check under the cap of the towing harness and it should have the connection diagram.
I just got my truck
Most excellent!
It’s a 22 I’m thinking about getting the oil filter mod
What color tailgate light Connecting reverse line thanks answer
awesome video as always! I only have a 20 sport, so no trailer plug. Anyone knowledgeable or successful in wiring these up still?
You can wire to your break lights. Same principle
Why splice? If you tow, you wont be able to see the lights, yes?
Because what if I’m towing a small flat trailer that you can see. Like a dirt bike or a jet ski.
Aggressive look on a honda truck ?
If it doesn’t include a waterproof plug, look somewhere else.
Would never splice into original harness bad idea to much risk for a short in the future or corrosion...
True. That is why I used these crimps. They do the least amount of damage and are very easy to repair to where you do not have to worry. I seen people cut their wires and solder together and that I over kill. But again this is what I did and does not mean others have to do it this way. Now At least people who want to will know how it’s done.
There’s better light bars then this one. But that’s my opinion.
which ones? looking for one
Nice but all videos pertaining to this use electrical tape. Has nobody heard of heat shrink tubing for waterproofing connections or even Posi-Taps? Sheesh!
I would have used it if I had some. When I was done I did wish I used heat shrink. But what’s done is done. For now.
Thankfully it's not your truck, but we can all learn from his shortcuts for what not to do to our truck.
Never seen why this light addition became popular. It looks cheesy.
I like cheese. If you don't like it, keep it to yourself. Peace.
Don't use those blue scotch lok . Most unreliable connection ever.
Well if it fails easy fix lol. It was really only one I had available that does the least amount of damage to OEM Harness
Meh. You can add to much and make it look janky. Just my opinion.
Agreed. I do however like it as it adds extra light when backing up at night.